NEOUSYS Nuvis-534RT Ultra-Compact Vision Controller Installation Guide
- June 12, 2024
- NEOUSYS
Table of Contents
Nuvis-534RT Ultra-Compact Vision Controller
Product Information:
The Nuvis-534RT is a system that offers various features and
connectivity options. It comes with a packing list that includes
the following items:
- 01 Nuvis-534RT system – 1 unit
- 02 Drivers & utilities disc – 1 unit
- 03 3-pin pluggable terminal block – 2 units
- 04 DIN-rail mount clip – 1 unit
- 05 Screw package – 1 unit
- 06 TB-10 – 1 unit
- 07 SCIS-68 male to SCSI-68 male 100cm cable – 1 unit
The Nuvis-534RT system features:
-
Nuvis-534RT Front Panel with 4 3-pin Remote On/Off
connections -
IEEE 802.3at Power over Ethernet Port for power and data
transmission via CAT-5/CAT-6 Ethernet cable -
3-pin DC Terminal Block for a wide range of DC power input (8
to 35V) -
USB3.1 Gen1 ports for high-speed data transfer
-
System Status LED for indicating various system states
-
DisplayPort and VGA Port for video and audio output
Product Usage Instructions:
-
Before starting the installation procedure, ensure that you
have the necessary tools and that the delivered contents match the
packing list. -
For DC power input, use the provided 3-pin pluggable terminal
block. The system accepts a voltage range of 8 to 35V. Make sure
the voltage is correct before connecting it to the system. Applying
a voltage over 35V can damage the system. -
The 3-pin Remote On/Off connections allow for external switch
extension. If the system is placed in a cabinet or a hard-to-reach
location, you can connect an external remote with an external
status LED indicator (15mA) by connecting it to PWR LED and
GND. -
The IEEE 802.3at Power over Ethernet Port supplies power and
data on a standard CAT-5/CAT-6 Ethernet cable. Each port can
deliver up to 25W to a Powered Device (PD). The system
automatically detects if the connected device is PoE PD or not
before supplying power, making it compatible with standard Ethernet
devices. -
The USB3.1 Gen1 ports on the front panel are backward
compatible with USB 2.0, USB 1.1, and USB 1.0 devices. Legacy USB
support is provided, allowing you to use USB keyboard/mouse in DOS
environment while USB3.1 Gen1 driver is supported natively in
Windows 10. -
The system has four LEDs on the front panel: IGN (reserved),
WDT, HDD, and PWR. These LEDs indicate various system states. -
The DisplayPort (DP) output supports digital display and audio
transmission to a display device. It can deliver up to 4K UHD (4096
x 2160 @ 30Hz) resolution. You can connect to other display devices
using DP-to-HDMI cable or DP-to-DVI cable. -
The VGA Port supports the most common video display connection.
It supports up to 1920×1200@60Hz resolution. To achieve the best
VGA output resolution in Windows and support dual display outputs,
install the corresponding graphics drivers.
Nuvis-534RT Quick Installation Guide
Warning
· Only qualified service personnel should install and service this product to
avoid injury.
· Observe all ESD procedures during installation to avoid damaging the
equipment.
1 Preparing tools Unpack the equipment and make sure the following tools are
available and delivered contents are correct before you begin the installation
procedure.
1-1. User-provided tools · Anti-static wrist wrap
1-2. Packing List
Item
Description
Qty
01 Nuvis-534RT system
1
02 Drivers & utilities disc
1
03 3-pin pluggable terminal block
2
04 DIN-rail mount clip
1
05 Screw package
1
06 TB-10
1
07 SCIS-68 male to SCSI-68 male 100cm cable 1
2 Nuvis-534RT Front Panel
4 3-pin Remote On/ Off
5 IEEE 802.3at Power over Ethernet Port
3 3-pin DC Terminal Block
The system accepts a wide range of DC power input from 8 to 35Vvia a 3-pin
pluggable terminal block, which is fit for field usage where DC power is
usually provided. The screw clamping mechanism on the terminal block offers
connection reliability when wiring DC power. Warning Please make sure the
voltage of DC power is correct before you connect it to the system. Supplying
a voltage over 35V will damage the system.
6 USB3.1 Gen1
The “Remote On/ Off” 3-pin connection allows for external switch extension. It is useful when the system is placed in a cabinet or a not easily accessed location.You may connect an external remotewith an external status LED indicator(15mA) by connecting toPWR LED and GND.
The Gigabit Power over Ethernet(PoE) port supply power and data on a standard CAT-5/CAT-6 Ethernet cable. Acting as a PSE (Power Sourcing Equipment), compliant with IEEE 802.3at,each port delivers up to 25W to a Powered Device(PD). PoE automatically detects and determine if the connected device is PoE PD or not before supplying power, making it compatible with standard Ethernet devices as well.
The system offers four USB 3.1 Gen1(SuperSpeed USB) ports on its front panel. They are backward compatible with USB 2.0, USB 1.1 and USB 1.0 devices. Legacy USB support is also provided so you can use USB keyboard/mouse in DOS environment while USB3.1 Gen1 driver is supported natively in Windows10.
7 System Status LED
8 DisplayPort
9 VGA Port
There are four LEDs on the front panel: IGN (reserved), WDT, HDD
and PWR. The descriptions of these four LEDs are listed in the following
table.
The system has a DisplayPort (DP) output which is a digital display interface that mainly connect video source and carry audio to a display device. When connecting a DP, it can deliver up to 4K UHD (4096 x 2160@ 30Hz) in resolution. The system is designed to support passive DP adapter/ cable. You can connect to other display devices using DPto-HDMI cable or DP-to-DVI cable.
The system supports dual independent display outputs by connecting display devices to VGA and DisplayPort connection. To support dual display outputs and achieve best DisplayPort output resolution in Windows, you need to install corresponding graphics drivers.
VGA connector is the most common video display connection. The VGA output
supports up to 1920×1200@60Hz resolution. The system supports dual independent
display outputs by connecting display devices to VGA and DisplayPort
connection. To support dual display outputs and achieve best VGA output
resolution in Windows, you need to install corresponding graphics drivers.
Note
Please make sure your VGA cable includes SDA and SCL (DDC clock and data)
signals for correct communication with monitor to get resolution/timing
information. A cable without SDA/ SCL can cause blank screen on your VGA
monitor due to incorrect resolution/timing output.
10 Nuvis-534RT COM Port Panel
11 Power Button
12 COM1 Port
The power button is a non-latched switch for ATX mode on/off operation. Press to turn on the system, PWR LED should light up and to turn off, you can either issue a shutdown command in the OS, or just press the power button. In case of system halts, you can press and hold the power button for 5 seconds to force- shutdown the system. Please note that there is a 5 seconds interval between two on/off operations (i.e. once turning off the system, you will need to wait for 5 seconds to initiate another power-on operation).
Implemented using industrial-grade ITE8786 Super IO chip (-40 to 85°C) and provide up to 921600 bps baud rate, COM1 is a software-configurable RS232/422/485 portvia 9-pin D-Sub male connector. The operation mode, slew rate and termination of COM1can be set in BIOS setup utility. The following table describes the pin definition of COM ports.
13 COM2/3/4 Port
14 Reset Button
15 4-pole 3.5mm Microphone-in/ Speaker-out Jack
Implemented using industrial-grade ITE8786 Super IO chip (-40 to 85°C) and provide up to 921600 bps baud rate, the D-Sub male connector (COM2/ 3/ 4) can be configured in the BIOS as single RS-422/ 485 port (COM2) or three 3-wire RS-232 ports (COM2/COM3/COM4).
The reset button is used to manually reset the system in case of system halt or malfunction. To avoid unexpected reset, the button is purposely placed behind the panel. To reset, please use a pin-like object (eg. tip of a pen) to access the button.
There is a female 4-pole audio jack for headphone (speaker) output and microphone input. To utilize the audio function in Windows, you need to install corresponding drivers.
16 Real-time Vision IO Panel
17 MCU Reset Button
18 Real-time Vision IO Connector
You may use the MCU reset button to manually reset the MCU without resetting the whole system. To avoid unexpected resets, the button is purposely placed behind the panel. To reset, please use a pin-like object (eg. tip of a pen) to access the reset button.
Real-time vision I/O is managed by Neousys’ patented MCU-based architecture and DTIO/ NuMCU firmware for microsecond-scale realtime I/O control. It also supports various machine vision peripherals such as CC/ CV lighting controller, quadrature encoder input, PWM output, isolated DI/ DO, 12V camera trigger output etc.
17 Vision Specific I/O: TB-10 Pin Connector
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>