GoveeLife H713B Smart Space Heater User Manual

GoveeLife H713B Smart Space Heater User Manual

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before using this heater

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• WARNING: In order to avoid overheating, do not cover the heater.

• The heater must not be located immediately below a socket outlet.

• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

• Children of less than 3 years should be kept away unless continuously supervised.

• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

• CAUTION-Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear.

• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.

• Always unplug heater when not in use.

• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.

• Do not use outdoors.

• This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.

• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings: Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.

• To disconnect heater, turn controls off, then remove plug from outlet

• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.

• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.

• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

• Faulty wall outlet connections may cause the wall outlet to overheat. Be sure that the heater plug fits tightly into the outlet before using. When using the heater, check to make sure the heater plug is not overheating. If necessary, have a qulified electrician check or replace the wall outlet.

• This heater can only be used when the ambient temperature is normal. When the heater detects that the ambient temperature is too high, it will automatically shut down. Please Inspect for any objects on or adjacent to the heater that may casue hight temperatures.

• Do not use this heater if it has been dropped.

• Do not use if there are visible signs of damage to the heater.

• Use this heater on a horizontal and stable surface.
  WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

• WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet,

• CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

SAVE THESE INSTRUCTIONS

Included in the Box

Introduction

GoveeLife Smart Heater is suitable for bedrooms, living rooms, offices, etc. Equipped with PTC heating elements, this smart heater can heat your room quickly in 3 seconds after it is powered on. With one tap in the app, you can adjust the heating based on your needs, bringing instant warmth and maximum home comfort during cold weather

Part Names

A. Cover
B. Control Panel
C. Air Outlet
D. Front Guard
E. Base
F. Built-in Handle
G. Air Inlet
H. Rear Guard
1. Power Cord & Plug
J. Power Switch

Controls

Power Button
Touch to power on or off.

Oscillation Button
Touch to start or stop the oscillation.

Mode Button
Touch to cycle through Heat Setting I. Heat Setting II, Heat Setting III, Auto Mode, and Fan Mode.
Note: Press and hold the Power Button and Mode Button for 10 seconds to restore the heater to factory settings and disconnect it from Wi-Fi and Bluetooth.

Timer Button
Touch to set a timer. Repeatedly touch the Timer Button to set a timer from 1-7 hours. The heater will automatically turn off when the time is up. Long touch the Timer Button for 2 seconds to turn off the timer

Night Light Button
Touch to turn the night light on or off.

Wi-Fi Button
Press the Oscillation Button and Mode Button for one second to turn the Wi-Fi Mode on or off.

Note: In accordance with relevant safety standards and regulations, if you want to control the heater remotely after it is powered back on, the Wi-Fi Mode must be turned on again.

• If the device has been connected to Wi-Fi before, you don’t need to connect again when turning on the Wi-Fi Mode. Wait for more than 10 seconds and the Wi-Fi will be connected automatically.
• When the device is connected to Wi-Fi and the power is kept on, you can turn the device on or off remotely and use other functions in the app as well.
• If you want to use the Bluetooth function, you need to perform this operation as well.
• If the device is only connected to Bluetooth without connecting to Wi-Fi, then you can achieve remote control through a Bluetooth connection.

Lock Button
Press and hold the Mode Button and Timer Button for 3 seconds to turn on the Lock Mode. When the lock is active, buttons on the panel will not respond to presses. Press and hold the Mode Button and Timer Button again for 3 seconds to turn off the Lock Mode.

Functions

Memory Function
This heater will memorize the previous settings (heat settings, oscillation, Wi-Fi connection) when it is powered off. The settings will be active again when this heater is turned on.

24-hour Automatic Shutdown
This heater will shut down automatically when it has been used for 24 hours straight in case the user forgets to power it off.

Overheat Protection
When the heater detects that the ambient temperature exceeds 104°F (40°C), it will automatically power off and all its indicators will flash three times. The heater will automatically resume when it detects that the ambient temperature is lower than 104°F (40°C).
Note: Overheat protection can be dismissed by unplugging the heater from power and waiting for 30 minutes for it to cool down before plugging back in.

Tip-over and Motion Protection
When the heater is moved or knocked over, it will automatically power off and stop all functions. This protection can be dismissed by placing the heater on a flat and sturdy surface and keeping it upright before using it again.

Note: This heater is embedded with a motion sensor. When it senses tip- over or unintended motion, the heater will automatically shut off.

Getting Started

1. Remove all packaging and ensure the air inlet and outlet are not blocked by foreign objects.

2. Do not use an extension cord.
   For UK/EU Version: Only plug the heater directly into a 220-240V wall outlet.
   For JP Version: Only plug the heater directly into a 100V wall outlet.
   

3. Ensure the power plug is firmly inserted into the outlet. An abnormal outlet connection may cause overheating.

4. Place the heater on a firm, flat, and level surface free from obstructions and at least 3ft (1 meter) away from any wall or combustible materials.
   Note: According to related safety standards, the power indicator should always light red when the heater is working.

5. Turn on the power switch on the back. Now your heater is ready for use!
   

Govee Home App

You can access more features using Govee Home App.

Downloading Govee Home App

To download Govee Home App, scan the QR code or search for “Govee” in the Apple App Store® (iOS) or Google Play Store (Android).

Note:

• Choose “Allow” to the permissions requested when opening Govee Home App for the first time. These permissions allow the app’s features to function normally and are not used to record personal, private information,
• Due to ongoing updates, Govee Home App may be slightly different than shown in this manual. In case of any differences, always follow the in-app instructions

Pairing with Govee Home App

1. Turn on your smartphone’s Bluetooth.

2. Open Govee Home App, tap the “+” Icon in the top right corner and search for “H713B”.

3. Tap the device icon and follow the on-screen instructions to complete pairing.
   Note:

   • You can use Govee Home App to connect your heater to Amazon Alexa or Google Assistant. Follow the In-app instructions to connect to each voice assistant.
   • Govee Home App is being continually updated and its features do expand

Care & Maintenance

Cleaning

To achieve the best performance, clean the heater at least once during the operating season or before storing it when it will not be used for a long period of time.

• Turn the heater off and unplug it from power, then use a soft damp cloth to clean its body. air inlet, and outlet.
• Do not submerge the heater in water and never allow water to drip into it.
• Do not risk your safety to detach the heater to clean its blade. Otherwise, it may damage the heater, shorten its service life, or cause serious danger.

Maintenance

Follow the cleaning instructions and allow all parts to dry completely before storing the heater in a cool, dry place.

Troubleshooting

The troubleshooting section below is for solving frequently asked questions. If your problem persists, please contact Customer Support.

For App & Connectivity

Cannot connect to Govee Home App

• Make sure your smartphone is powered on and is not connected with other Bluetooth devices.
• Enable the smartphone’s Location Services.
• Try connecting with another smartphone.
• Make sure your app is updated to the latest version,
• Make sure you connect to your Wi-Fi router’s 2.4GHz network and that the network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
• Shorten the distance between the heater, Wi-Fi router, and the smartphone.
• Make sure your heater and the Wi-Fi router are located away from appliances that produce electromagnetic radiation (e.g. microwave ovens, refrigerators, etc.)
• If you are using a VPN, try turning it off and then connecting the heater.
• Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, this heater will not be able to access your Wi-Fi network, and setup will fail. Portal authentica- tion means that you need to sign in to your Wi-Fi network through a web page before you can use the Internet.

Cannot find the device on “Bluetooth Device Nearby page of the app

• The heater may be connected with another smartphone. Disconnect it from the other smartphone first.

The heater is offline

• Make sure the heater is plugged in and powered on, then refresh “My Devices” page in Govee Home App by swiping down on the screen.
• Make sure your router is connected to the internet, and your phone’s network connection is working.
• If the Wi-Fi password has been changed, the heater will automatically go offline. Try
  connecting it to the network again.
  Delete the offline heater from Govee Home App, then add and reconfigure the heater again in the app.

Specifications

• Model Name: H7138
  Power Voltage: EU/UK, 220-240V 50/60Hz JP: 100V~50/60Hz
  Rated Power: EU/UK: 1500W MAX
  Net Weight: JP: 1200W MAX

• Dimension: 1.7kg/3,741b 150150290mm/5.9 5.9*11.4 inch

Appendix

After-Sales Service

Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: support@govee.com
Official Website: www.govee.com
@Govee
@goveeofficial
@govee.official
@GoveeOfficial
@GoveeOfficial

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>