KEYSCO HLSH08 Magic Crystal Mouse User Manual

: July 8, 2024
: KEYSCO

Table of Contents

WIRELESS MOUSE
USER MANUAL
Peach Mouse

WIRELESS MOUSE

USER MANUAL

Peach Mouse

Packing List

1. Peach Mouse 1
2. User Manual 1
3. USB-C Charging Cable 1
4. USB Dongle 1

Product Image

Left button
Mouse wheel
Right button
Lighting Mode switch
Type-C Port
Toggle switch

Hardware connection

Power on your computer
Press and hold the left, middle and right buttons for three seconds at the same time in the Bluetooth mode and the bottom indicator flashes quickly. At this time, search for “BT 5. 0 ” equipment can be connected and paired for use.
The USB receiver can be unplugged or plugged in at any time when the computer is in use

Battery display

Power indicator at the top right corner of PCB board: 4 ≈100% – 3 ≈75% – 2 ≈50 -1 ≈25% (white), power on four lights, 10 seconds after the automatic extinguish.

Mouse sleep/wake up mode

After 10 minutes, you need to press the mouse button to wake up the deep sleep.

Product parameter

DPI:800/1200 (acquiesce) /1600
Charging voltage/current: DC 5V/≤400mA
Battery capacity: 400mAh
Weight: Approx.70g (including 2g receiver)
Dimension: 113.5x58x25±2mm
Charging mode: Type-C
Transmission mode: Wireless 2.4G/ Bluetooth
Bluetooth version: 5.0
Bluetooth name: BT5.0
Working Voltage :3.3V-4.2V
Working current: Light on mode ≤25ma (Off mode ≤8ma)
2.4G system requirements: Windows XP, Windows7, Window s8, Windows10 and above, Windows, Android 4.4 and above,
iO513 or later, MacOS X 10.5 or later, Linux Kernel 2.6+2, Chrome OS
Bluetooth system requirements: Windows 8, Windows 10,And roid5.0 and above, i0S13 and above, macOS X10.10 and above
Hardware configuration requirements: Bluetooth 4.0 or later Bluetooth adapter

RGB Operation

Open the mouse switch, after successful connection, Press bottom of mouse Lighting mode switch key turn on the light mode. “11 + 1” lighting modes can switch the light effect. Press and hold to turn off the light mode. Press and hold to switch “11” light effects.
When there is no action on the mouse within 10 minute, the mouse will enter standby mode and all lights will be turned off.
After entering sleep mode, press any key to enter reconnection and the lights will automatically turn on.

Troubleshooting

01: Why my device can’t search the mouse?
A: Please make sure you have open the switch button, and pressed the button for 5s.

Q2: Does this mouse compatible for Huawei laptop?
A: Yes, this mouse could compatible for iOS, Mac, Android, Windows all the smartphones, tablets and computers.

Q3: How long should I charge for the mouse?
A: Usually our mouse could use for 15 days without RGB; Using 8 hours with RGB mode.

Please contact us timely if you meet any problems, we will solve for you as soon as possible.

FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.