ESCORT M2 Smart Dash Cam User Manual
- June 14, 2024
- ESCORT
Table of Contents
M2 FAQs
M2 Smart Dash Cam
Q: How do I connect to the dash cam’s Wi-Fi?
A: You don’t need to manually connect to the Dash Camera’s Wi-Fi to download
videos. Simply connect the camera to the
Drive Smarter app and the app will manage the Wi-Fi connection for you if you
need to access the Gallery or Live View
Q: Why am I having trouble connecting the Camera in Drive Smarter?
A: You may have previously established a Bluetooth connection with the camera.
If this is the case, please go into your phones OS Bluetooth menu and ‘Unpair’
your camera from your phone.
Q: How does the dash cam work in Parking Mode and Motion Detection?
A: When you hardwire your Radar detector and camera (using accessory
0010057-2) the camera will continue to receive power when the vehicle is off.
This allows the camera to go into a surveillance state where it is monitoring
for activity but is not recording. Once the camera detects a G-Sensor impact
(someone bumps your vehicle) or motion is detected, the camera will turn on
and record a clip for you to review later.
You will then need to connect your M2 to the Drive Smarter app to enable
Parking Mode or Motion Detection by visiting the “Surveillance Mode” setting.
Please note, that in “Parking Mode” the camera monitors for G-Sensor impacts
(bumps, collisions). In “Motion Detection” mode the camera monitors for fast
changes in light such as headlights approaching, or a garage door being
opened. If you park in a busy area the camera may continue to detect changes
in light and continue to record. You can toggle what the camera monitors for
using the Surveillance Setting inside the Drive Smarter app.
Q: Does the dash cam record audio?
A: Yes, the dash cam has a microphone to record audio. If you would prefer to
not have the audio recorded, go to the settings menu in the Escort M1 app and
mute the audio from there.
Q: How does the G-Sensor work?
A: The G-Sensor inside the dash cam detects whenever there is an impact and
automatically locks the current video file as an emergency recording so that
it is not looped over. When G-sensor is triggered, the camera will announce
that the recording has been locked. Please note that you can manually lock
the current video file by pressing the multifunction button.
Q: What is loop recording?
A: Loop recording is a typical recording mode for dash cams where the camera
continually saves video (usually 1, 3, or 5-minute segments) to the micro SD
card. Once the memory is full, it then goes back to the oldest file and
records over that file and continues looping so that the most recent video
will be saved on the micro SD card. Loop clips can be protected either by the
G-Sensor automatically saving whenever there is an impact or by manually
pressing the power button to ensure that the clip is not looped over.
Q: How do I get the video off the dash cam?
A: There are a few ways to get dash cam footage off the dash cam. Connect the
dash cam to the Drive Smarter app and download directly to your smartphone.
You can also plug the dash cam into your computer with the included micro USB
cable and download directly.
Q: How much video can be saved on the micro SD card?
A: Recording times can vary, but in general the 16GB card included with the
Escort M2 will hold about 2 hours 40 minutes of 1080p video.
Q: What is the largest size micro SD card I can use with the Escort M2?
A: Up to 128 GB
Q: What is the kind of micro SD card I can use with the Escort M2?
A: A 16GB SD card is included and with loop record capability the camera never
runs out of space for new recordings.
If you’d like to upgrade a Class 10” High Endurance cards or better is
recommended; with 128GB of capacity or less. Due to constant video recording,
we recommend “Class 10” High Endurance cards or better from reputable brands
(examples: SanDisk, Western Digital)
SD Card Size and Time
When recording at 1920×1080 @ 30P with audio:
8GB = 80 minutes (1 hour, 20 minutes)
16GB = 160 minutes (2 hours, 40 minutes)
32GB = 320 minutes (5 hours, 20 minutes)
Q: How do I update the firmware?
A: The Drive Smarter app will notify you that a new firmware is available when
you connect the Dash Cam, you can
Q: My dash cam is telling me to “Format the Micro SD Card”, what should I
do?
A: There are a few errors that could be occurring. Check that there is a micro
SD card in the dash cam. Check that the micro SD card is aligned properly in
the dash cam. If there is still an error after checking 1 & 2, connect the
dash cam to the Drive Smarter app and go to the settings menu to format the
micro SD card. Please note, all videos will be erased from the micro SD card
when formatting is complete. If there is still an error after formatting the
micro SD card, you may have a faulty micro SD card. Please replace with a new
micro SD card, we recommend using a Class 10 micro SD card.
Q: Why does my Android smartphone lose its data connection when connected
to M2 via Wi-Fi?
A: When you connect your Android smartphone to the M2 dash cam it creates a
direct Wi-Fi connection between the two devices. When this happens the Android
device loses its other network connections. To resume other network
connections. If you exit the app your phone will be connected again.
A: We do not have a specific video viewer program for Windows or Mac, but the
video files are saved as .MOV and can be played back on most native video
players.
App shows device is “Out of Range” even though I am sitting right beside
it.
Please confirm you have Bluetooth turned on, on the smartphone. Confirm that
the device is powered on, turned on completely, and is responsive to button
presses. The app scans for devices periodically, so user can try waiting for a
minute or so for initial connection. Typically, device is seen in 5-10 seconds
but there may be differences based on the OS/ version /hardware. Try tapping
on the tile showing the Device under the “Vehicle” to refresh its status.
Android Users: Check that Drive Smarter’s location permissions have been set
to “Allow All the Time”. Certain versions of Android prevent automatic
Bluetooth connectivity when this setting is disabled or set to “While Using
the App”. This can be changed by going to your phone’s permission (Settings >
Apps >Drive Smarter > Permissions > Location > “Allow All the Time”)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>