HYENA CT-02 E-Bike Instruction Manual

: June 12, 2024
: HYENA

Product Manual
CT-02

HYENA CT 02 E Bike - Cover Original Instruction
Version 230210 Copyright
© 2023 HYENA INC. All Right Reserved.

Introduction

This manual is intended primarily for the trained technician to install, disassemble, or maintain the Hyena e-bike system only. Please read all the safety warnings and instructions carefully. Failure to follow the warnings and instructions may result in death or severe injuries. Save this manual for future reference.

Product Features

Product Description

The Hyena CT-02 throttle features a universal design and easy installation on the bike handlebar. It fits most e-bikes and provides steady and sensitive control of speed.

Product Dimension

HYENA CT 02 E Bike - Product Features 1

*(Cable) WL value:
PN. 50X002-01, WL=250mm
PN. 50X008-01, WL=600mm
PN. 50X020-01, WL=700mm

Cable Pin Definition

Technical Data

Characteristic

Protocol	CAN	Support Hyena CAN
Operating voltage	5V
Output voltage	0.8 to 4.2±0.1V
Operating temperature	-20℃ to +80℃ @80%RH
Storage temperature	-20℃ to +80℃ @80%RH
Waterproof level	IPX5

Mounting Parameter

Dimension| L48, H23 mm|
---|---|---
Weight| <50g|
Mounting position| Handlebar|
Cable length| 250, 600, 700 mm| PN. 50X002-01, WL=250mm
PN. 50X008-01, WL=600mm
PN. 50X020-01, WL=700mm
Standard connector| Hyena 3P male| CM-WP408-03M

Certification

EN 15194:2017	Yes
CE	Yes
RoHS 2.0	Yes

Mounting

Tool List

Hexagon key M3

Accessory List

Hex socket head cap screw	M3x0.5Px12mm	1 pc

Mounting Instructions

Use the proper tools during the installation or removal process.
Carefully install is necessary, do NOT strike it with any tool such as a hammer or wrenches.

|
---|---
Remove the handlebar grip.| Install the throttle.
|
Fasten the screw with torque to 1 Nm.| Replace the handlebar grip.

NOTE: the bike image and mounting position seen in the manual may be different from the actual bike, but it will be enough to help you understand related instructions.

https://www.youtube.com/watch?v=kn5iRKYomkw&list=PLNqeDELGImB3ohnOTp5W8M1gW1xT8hhFO&index=4

Use your smartphone to scan the code to find the assembly/ disassembly videos.

Safety Instructions

Instructions Pertaining To A Risk Of Fire, Electric Shock, Or Injury To Persons
WARNING! When using the CT-02 Throttle, basic precautions should always be followed, including the following:

Read all the instructions before using the product.
To reduce the risk of injury, close supervision is necessary when the product is used near children.
Do NOT use this product if the flexible power cord or output cable is frayed, has broken insulation, or any other signs of damage.
All the component charging terminals and leads shall use original Hyena components.
This product is not intended to be used at ambient temperatures less than -20°C(4°F) or above ambient temperatures of 80°C(176°F).
Do NOT immerse the product or any e-system component in water.
Do NOT place the product or any e-system component near fire or heat.
Always turn off the e-bike system and remove the battery before installing, disassembling, or modifying any components on the e-bike.

Important Notice

This product manual is intended primarily for the trained technician to install, disassemble or maintain the e-bike.
Users who are not professionally trained in bicycle assembly should not attempt to install, disassemble or modify the components themselves.
All Hyena e-system manuals and technical documents are accessible online at “www.hyena-ebike.com”.
The term “battery” is used in these instructions to mean all original Hyena e-bike batteries.
Read and observe the safety warnings and directions contained in all the Hyena e-bike system operating instructions and in the operating instructions of your e-bike.

Moving and Storage Instructions

When possible keep the product and all e-system components in their original package and keep tools or other metal objects away from them while storage and moving.
If you did not keep the original packaging, they can be packed in solid cartons with proper packing materials such as bubble wrap or soft cloth, and label the cartons Fragile.
Do NOT store the product at ambient temperatures less than -20°C(-4°F) or above ambient temperatures of 80°C(176°F).
Cover the product to prevent sunlight damage if you will be keeping it stored at any place for more than a week.
Store the product on a fireproof surface and without contact water, heat, or sand.
Do NOT place any heavy item on the product or e-system component.
Do NOT place the product or any e-system component in the car trunk for more than one day.
Do NOT load or move the product in the rain whenever possible, and make sure it has no moisture or mildew before loading it.
Do NOT drop the product from more than 30cm (11.81 inches) height.

Maintenance

Do NOT clean the product or any e-system component with any detergent or organic solvent. Only clean the product with a water-dampened soft cloth.
Do NOT clean the product or any e-system component with pressured water.

Disposal

In accordance with Directive 2012/19/EU, electronic devices that are no longer usable and defective/drained batteries must be collected separately and recycled in an environmentally friendly manner.

This symbol is only valid within the European Union. Follow local regulations when disposing of used batteries. If you are not sure, consult the place of purchase or a bicycle dealer.

The e-system drive unit, including the motor, controller, battery, speed sensor, HMI, accessories, and packaging, should be disposed of in an environmentally correct manner.
Do NOT dispose of e-bikes and their components with household waste.

SAVE THESE INSTRUCTIONS

Hyena Inc.
Tel: +886 4 23598810
Fax: +886 4 23598610
www.hyena-ebike.com
Address: No.25, Jingke N. Rd., Nantun Dist., Taichung City 408, Taiwan (R.O.C.)