AcuityBrands L-Type Track Adapter Installation Guide
- June 12, 2024
- AcuityBrands
Table of Contents
AcuityBrands L-Type Track Adapter
Product Information
| Product Name | L-Type Track Adapter |
|---|---|
| Installation Option | For L-Type Track Adapter Option |
Installation Instructions
- Find the latch and the polarity line.
- Align the latch and the polarity line as shown below.
- Insert the adapter box into the track.
- Rotate the adapter box in the direction of the Install arrow until the latch snaps in place between the two track rails.
- Continue to depress the latch until it reaches the final position.
- The latch should snap into place between the rails.
Second Circuit Positioning
- Hold onto the Adapter Box with one hand.
- Place the end of a flat head screwdriver under the contact shown below.
- Gently pull up, the contact should move vertically until hitting a hard stop.
- Follow the instructions for inserting into the track.
SAVE THESE INSTRUCTIONS
Second Circuit Positioning
- Hold onto Adapter Box with one hand
- Place the end of a flat head screw driver under the contact shown below
- Gently pull up, the contact should move vertically until hitting a hard stop
- Follow instructions for inserting into track
CONTACT
- 1300 S. Wolf Road
- Des Plaines, IL 60018
- 800-323-5068
- www.acuitybrands.com.
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4678
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>