AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow Juicer Instructions

June 14, 2024
amzchef

AMZCHEF logo INSTRUCTION MANUAL
Meat Grinder Attachment

ZM1501 Metal Food Grinder Attachment for Slow Juicer

AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow
JuicerModel No.:P-002B
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY RETAIN THIS MANUAL FOR FUTURE REFERENCE

PARTS AND FEATURES

PARTS AND ACCESSORIES

AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow Juicer - PARTS AND
FEATURES

METAL FOOD GRINDER ATTACHMENT SAFETY

Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean:
DANGER
You can be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS FOR USE MEAT GRINDER

When using electrical appliances, basic safety precautions should always be followed, including the following:

  1. Read all instructions.

  2. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.

  3. Turn the Stand Mixer OFF (and detach the Metal Food Grinder attachment from the Stand Mixer) after each use of the attachment and before cleaning. Make sure motor stops completely before disassembling.

  4. Avoid contacting moving parts. Keep fingers out of discharge opening.

  5. The use of attachments not recommended or sold by us may cause fire, electric shock, or injury.

  6. Never feed food by hand. Always use the food pusher.

  7. Blades are sharp. Handle carefully.
    METAL FOOD GRINDER ATTACHMENT SAFETY

  8. Do not use fingers to scrape food away from discharge disc while appliance is operating. Cut-type injury may result.

  9. Also see the Important Safeguards section included in the Stand Mixer Use and Care guide.
    SAVE THESE INSTRUCTIONS
    This product is designed for household use only.

USING THE METAL FOOD GRINDER ATTACHMENT

GUIDE TO GRINDING

USE THESE PARTS WITH THESE PARTS SUGGESTED USES
Fine grinding plate (3 mm) Blade Cooked meats for spreads, hard cheeses

(e.g.Parmesan), bread crumbs
Medium grinding plate (4.5 mm)| Blade| Raw or cooked meats, meats for sausages
Coarse grinding plate (8 mm)| Blade| Raw meats for burgers and chili, vegetables for salsas and sauces
Small sausage stuffer tube (9.5 mm)| Sausage stuffer plate| Breakfast sausage, smaller sausages
Medium sausage stuffer tube (19 mm)| Sausage stuffer plate| Bratwurst, medium sausages
Large sausage stuffer tube(32mm)| Sausage stuffer plate| Bratwurst,larger sausages

Wash all parts with warm, soapy water and dry thoroughly before use.

AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow Juicer - FOOD
GRINDER Insert the grind screw into the main housing. Then, place the blade over the end of the grind screw. The blade should fit entirely inside the housing. If it doesn’t, pull it off, turn it over, and place it again.AMZCHEF ZM1501 Metal Food Grinder
Attachment for Slow Juicer - FOOD GRINDER 1Place grinding plate over the blade, matching the notch of the plate with the tab on the bottom of the main housing.AMZCHEF
ZM1501 Metal Food Grinder Attachment for Slow Juicer - FOOD GRINDER
2Place the collar on the main housing, turning clockwise by hand until secured but not tightened.

ATTACHING THE METAL FOOD GRINDER ATTACHMENT TO THE SLOW JUICER Turn the Slow Juicer off and unplug.AMZCHEF ZM1501 Metal Food Grinder Attachment for
Slow Juicer - FOOD GRINDER 4Insert the attachment shaft into the hub socket on the main body of juicer. Rotate the attachment anticlockwise until you hear a “Tick” sound. Rotate attachment back and forth if necessary.
GRINDING WITH THE FOOD GRINDER

AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow Juicer - FOOD GRINDER
5

WARNING

Rotating Blade Hazard Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputation or cuts. AMZCHEF ZM1501 Metal Food
Grinder Attachment for Slow Juicer - FOOD GRINDER 6Turn on the slow juicer and feed food into the feed tube using the food pusher.

ASSEMBLING THE SAUSAGE STUFFER

AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow Juicer - FOOD GRINDER
7 Insert the grind screw into the main housing. Then insert the sausage stuffer plate over the end of the grind screw, matching the notch of the plate with the tab on the bottom of the main housing.AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow
Juicer - FOOD GRINDER 8Insert the desired sausage stuffer tube (large or small) through the collar. Then, place the collar and tube assembly on the main housing, turning the ring by hand until secured but not tightened.
USING THE SAUSAGE STUFFER

Feed meat into the Metal Food Grinder attachment before adding the sausage stuffer tube. This will eliminate air pockets. Lubricate the sausage stuffer tube and slide one casing over the tube, leaving about four inches to tie off the end. Turn on the slow juicer and slowly push the meat through the grinder. Hold the casing firmly as it fills. If air bubbles are created during the fill process, use a pin or needle to pop the bubble.

Run meat through until 4-6 inches of casing is left unfilled. Turn off the slow juicer and tie the remaining end of the casing or use a tie string.

NOTE: For segmented-type sausage (e.g., bratwurst), twist casing ends in alternating directions at desired sausage link length.

TIPS FOR GREAT RESULTS OF MEAT GRINDER

HELPFUL HINTS
For best results, grind meat that is very cold or partially frozen.The grinder parts can be pre-chilled in the refrigerator or freezer before use to maintain a grinding temperature.
For more tender results,some meats can be ground twice.However,fatty meats should be Ground only once.
To grind bread for crumbs,be sure that bread is either oven-dried thoroughly to remove all moisture,or not dried at all.Partially dried bread may jam the metal food grinder attachment.
NOTE:Very hard,dense foods such as completely dried homemade bread shold not be ground in the metal food grinder attachment.Homemade bread should be ground fresh and then oven-or air-dried.
If using natural casings,it is recommended to first soak them in cold water for 30 minutes to remove excess salt,then rinse several times by running cold water through the entire length of the casing.For best results for sausage,refer also to the instruction that came with the casings.

CARE AND CLEANING FOR MEAT GRINDER

CLEANING THE METAL FOOD GRINDER ATTACHMENT AND ACCESSORIES

AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow Juicer - FOOD GRINDER
13Use the cleaning brush to clean the main housing and other accessories, including the grinding plates.

AMZCHEF ZM1501 Metal Food Grinder Attachment for Slow Juicer - FOOD GRINDER
14The following parts should be hand-washed only, using warm, soapy water and drying thoroughly: main housing, grind screw, collar, tray, grinding plates, and blade.
Manufacturer:
Zhongshan Jimi Electrical Appliance Co.,Ltd
Add.:No.2,Yucheng 2ND road,Xiaolan Town,Zhongshan City,GuanDong China
Name: APEX CE SPECIALISTS LIMITED EC REP
Add.:UNIT 3D NORTH POINT HOUSE,NORTH POINT BUSINESS
PARK,NEW MALLOW ROAD,CORK,T23 AT2P,IRELAND
WEEE-Reg.-Nr.DE 20193320
LUCID-Reg.-Nr.DE5698760378353
WEEE-Reg.-Nr.DE 14015644
LUCID-Reg.-Nr.DE2557525639030
This marking indicates that this product should not be disposed with other Ehousehold wastes throughout the EU. To prevent possible harm to the BN cnvironment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

WARRANTY

Dear Customer,
Thank you for choosing AMZCHEF product. We sincerely hope that you are satisfied with it. The manufacturer’s warranty covers the product for a period of 24 months from the date of purchase against manufacturing faults. All warranties are automatically kept track of in our system, so there is no need to register your product.
For an extra
1 year’s free warranty, please register at our official website www.iamzchef.com or fill in following Warranty Card, take picture and send to info@iamzchef.com.
Agent/Distributor is welcomed to contact us. Email: info@iamzchef.com.
Any help or questions during use, Quick Contact: info@iamzchef.com, we will service you within 24 hours. We suggest to provide a warranty card, a photo or a video if there’s broken spare part or not working machine so that we can be much more clear about your problems and offer you the best solution.

Warranty Card

Email:…………………………………..
Buyer’s name:……………………….
Address:……………………………….
Tel.:………………………………………
Order Number:………………………..
Purchase date:………………………….
Item name:…………………………………
Model:………………………………………
KSen’al No ………………………………

Kindly send back the warranty card to us after filling in the information. Thanks for your effort!AMZCHEF logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals