AcuityBrands H-Type Adapter Installation Guide
- June 12, 2024
- AcuityBrands
Table of Contents
AcuityBrands H-Type Adapter
Product Information
This product is an H-Type Adapter that is used for installation purposes. It is designed to be inserted into a track to provide connectivity and support for various components. The adapter box has a latch and a polarity line. The latch is used to secure the adapter box in place between the two track rails, while the polarity line helps ensure proper alignment.
Product Usage Instructions
Follow the steps below to install the H-Type Adapter:
- Locate the latch and the polarity line on the adapter box.
- Align the parts as shown in the diagram.
- Insert the adapter box into the track.
- Rotate the adapter box in the opposite direction of the arrows until the latch snaps into place between the two track rails.
- Continue to depress the latch until the adapter box reaches its final position.
To position the second circuit, follow these steps:
- Hold onto the Adapter Box with one hand.
- Place the end of a flat head screwdriver under the contact shown in the diagram.
- Gently pull up on the screwdriver, causing the contact to move vertically until it hits a hard stop.
- Follow the specific instructions for inserting the second circuit into the track.
Ensure that you carefully follow these instructions to properly install and position the H-Type Adapter.
SAVE THESE INSTRUCTIONS
Second Circuit Positioning
- Hold onto Adapter Box with one hand
- Place the end of a flat head screw driver under the contact shown below
- Gently pull up, the contact should move vertically until hitting a hard stop
- Follow instructions for inserting into track
CONTACT
- 1300 S. Wolf Road
- Des Plaines, IL 60018
- 800-323-5068
- www.acuitybrands.com
©.2017 Acuity Brands Lighting, Inc. Rev 4/18 P4677
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>