inateck BK2009 Bluetooth Keyboard Case Instruction Manual
- June 12, 2024
- inateck
Table of Contents
inateck BK2009 Bluetooth Keyboard Case Instruction Manual
Product Diagram
Bluetooth Pairing
Step 1: Pt he P it th case, e the pawer switch o he On pstion and ong
press
simultaneously. Then, Indicator 1 wil lblnk in biue, indicating that the
keyboard i in Bluetooth pairing mode.
Step 2: On your iPad, go to Settings > Bluetooth, turn o Bluetooth and
then Inateck BK2009″ il show up in“Other Devices”
Step 3: Tap “Inateck BK2009″to pair it with your that Bluetooth pairing
is completed.
Step 1: Go o Settings > Bluctooth, find nateck BK2009″in My Devicesand
tap the Info (3 next o, then tap Forget This Device. If there are multiple
pairing records related to the keyboard, please clear all of them.
Step 2: Hold [ 1 1 pimlancousl for 3 seconds an hen hencator 1 bl e tmes
ocete factory reset is completed.
Step 3: Pair your iPad with BK2009 again.
Shortcut Keys
- 1.To use below shortcut keys please press , Jand the corresponding number ey o the function simultaneously. For example, to make BK2009 mute, you need to press simultaneously.
| Key | Function | Key | Function | Key | Function |
|---|---|---|---|---|---|
| Output ‘ | Brightness – | Brightness + | |||
| Multitasking interface | Take a screenshot | Switch keyboard layout | |||
| Last track | Play/Pause | Next track | |||
| Mute | Volume – | Volume+ | |||
| Lock |
Common Keyboard Shorteuts
| Cut | Copy | Paste | |||
|---|---|---|---|---|---|
| Select all | Search | control+Space | Switch keyboard layout | ||
| Switch between Apps |
Tips: Hold the row shortcuts. key to see a list of shortcuts that you can use with an app, excluding the top
| Indicator | Status | Meaning |
|---|---|---|
| Indicator 1-Blue | Solid | Caps Lock on |
| Off | Caps Lock off/ Bluetooth connected / Bluetooth unconnected | |
| Blinking | Bluetooth Pairing / Bluetooth Reconnecting | |
| Indicator 2-Red | Off | Fully charged |
| Blinking | Battery level<20% | |
| Solid | Charging |
Restore Factory Defaults
Hold simultaneously for 3 seconds and then the Indicator 1 will blink for 3 times once the factory reset is completed.
Check Battery Level
When the eboard s unchorgd r Buctoth s conected hold simtanously check the atery level according to the blinking frequency of Indicator 1.
| Blinking Frequency | Battery Level |
|---|---|
| Once | 0-25% |
| Twice | 25%-50% |
| Three Times | 50%-75% |
| Four Times | 75%-100% |
Charging
When the battery level is under 20%, the Indicator 2 will blink in red. Please use the included USB cable to recharge the keyboard for 2 hours. The suggested charging voltage and current are 5V/200mA. The Indicator 2 will stay in red when the keyboard is charging. Once it fully charged, the indicator 2 will go off.
Sleep Mode
When BK2009 s leftile for 10 minutes, it wil enter sleep mode and the Bluetooth connection will be disrupted. ‘The connection can be rebuilt with a press of any key.
Product Specification
| Effective Transmission Distance | 10m |
|---|---|
| Charging Time | About 2h |
| Continuous Working Time | About 150h |
| Operating Temperature | -10° -55° |
| Bluetooth Frequency Range | 2402-2480MHz |
| Actuation Force | 60 ± lOg |
| Battery Capacity | 300mAh |
Packing List
- BK2009 1
- Charging Cable *1
- Instruction Manual *1
FCC Note
“This device complies with part 15 of the FCC Rules. Operation is subject o
the following two conditions: 1) This
device may not cause harmful interference, and (2) this device must accept any
interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class 8 digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
Users, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular
installation.If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to ry to correct the interference by one or more of
the folowing measures:
- ient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver s connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment. ‘The device has been evaluated to meet general RF exposure requirement. “This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antennals) must not be co-located or conjunction with any other antenna or transmitter.
Service Center
Europe
F&M Technology GmbH
Tel: +49 3415199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 3415199 8413
Address: Fraunhoferstrafie 7,04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1(909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
F &M Technology GmbH
Fraunhoferstrafie 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Inateck Technology (UK) Ltd.
95 High Street, Office B, Great Missenden, United
Kingdom, HP16 0AL
Tel: +44 20 3239 9869
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian
Street, Longgang District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>