RIVER OF GOODS 21089 1-Light Brass Metal and Clear Glass Shaded Pendant Lamp Instruction Manual
- June 12, 2024
- River OF GOODS
Table of Contents
RIVER OF GOODS 21089 1-Light Brass Metal and Clear Glass Shaded Pendant
Lamp
Product Information
Product Name: Assembly Item No. 21089 Components: – Screws (quantity not specified) – Part 2 Glass Jar (quantity not specified) – Final Pc. (quantity not specified) – Lamp (specific wattage options mentioned below) – Small Shade – Big Shade Country of Origin: India
Product Usage Instructions
- Place all parts on a flat smooth surface.
- Start the Lamp assembly.
- Lamp Installation:
- CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage.
- Do not exceed the maximum wattage mentioned on the caution label.
- Choose one of the following compatible lamp options (not included):
- E26 Type A – 40W
- E26 CFL – 40W
- Install the chosen lamp into the lamp holder.
- Lastly, install the Small Shade to the Big Shade using the provided D-Screws.
Product Care Instructions
- Use only a soft cloth to clean the product.
- Do not use any chemicals or abrasive cleaners.
ASSEMBLY INSTRUCTIONS
-
Place all parts on a flat smooth surface and start the Lamp assembly
-
Lamp installation
CAUTION – Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box. Turning the power off using the light switch is not sufficient to prevent electrical shock -
Install the Crossbar A to the ceiling outlet box using the provided screws
-
Wiring: using the provided Wire Connectors connect the Lamp BLACK wire to your installation POSITIVE wire, then connect the Lamp WHITE wire to the NEUTRAL. Lastly, connect your house Ground wire and the Lamp BARE GROUND wire to the GROUND SCREW located in the Crossbar A
-
Gently push the wiring inside the electrical box, then lift the lamp from Canopy B and using the two Canopy screws attach it to the Crossbar A
-
Install the Big Shade on the Socket using the Socket ring
-
Install the BULB(s) {Not included)
CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage -
Lastly, install the Small Shade to the Big Shade using the provided D – Screws.
- E26 Type A – 40W (Not included)
- E26 CFL – 40W (Not included)
CARE INSTRUCTIONS
- Use only a soft cloth; do not use any chemicals or abrasive cleaners.
MADE IN INDIA