In Common With Paloma Pendant Light Instruction Manual
- June 12, 2024
- In Common With
Table of Contents
In Common With Paloma Pendant Light
Product Information
Paloma Pendant
The Paloma Pendant is a stylish and modern light fixture that adds a touch of elegance to any space. It comes with all the necessary components for installation and is designed to provide a bright and pleasant lighting experience.
Product Contents
- Part A – Backplate
- Part B
- Part C
- Part D
- Wago Clips (x3)
- Mounting Screws (x2)
- Part E – G9 LED Bulb
- Part F – Orb 5 Diffuser
- Part G – Canopy Base
- Part H – Canopy Cover
- Part I – Stem
- Part J – Paloma Shade
Product Usage Instructions
-
1. Step 1: Turn off electrical power at the main fuse box or circuit panel before beginning installation. -
Step 2: Mount the backplate (A) to the junction box using aphillips head screwdriver to tighten the mounting screws (C).
-
- Step 3: Feed the wires from the shade assembly (J) through the brass stem.
-
Step 4: Secure the stem (I) to the shade assembly (J). Rotate the stem clockwise to secure firmly in place.
-
- Step 5: Gently slide the canopy cover (H) down the stem(I).
-
Step 6: Secure the brass stem to the canopy base (G). Rotate the stem clockwise to secure firmly in place.
-
- Step 7: Use the wago clips (F) to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/Yellow is ground. One ground wire will be attached to the backplate (A), the other ground wire should come from the junction box. If needed, use a wire stripper to remove 3/8 of the insulation from each wire before inserting them into the corresponding wago clip.
-
- Step 8: Mount canopy base (G) into the backplate using a phillips head screwdriver to tighten mounting screws (D).
-
- Step 9: Secure the canopy cover (H) to the canopy base (G). Rotate the canopy cover clockwise to secure firmly in place.
-
- Step 10: Gently squeeze the protective paper and remove it from the canopy cover. Discard.
-
Step 11: Push the lightbulb (E) into the socket of the shade assembly (I).
-
Step 12: Screw the diffuser (F) into the glass holder in the shade (I). Turn the power back on at the main fuse box or circuit panel you disabled before installation.
How to Install Your New Light
Please check that you received all of the components pictured in this guide.
Reach out to us if anything is missing. It’s very rare, but it happens. Don’t
forget to turn off the electrical power source.
Tools you will need that aren’t included: standard wire stripper, Phillips
head screwdriver.
CAUTION
Electrical shock risk. Turn off electrical power at the main fuse box or
circuit panel before beginning installation, servicing the light, or
installing accessories. We recommend working with a qualified electrician
familiar with the type of work you’d like done.
Contents
Installation
- Step 1: Turn off electrical power at the main fuse box or circuit panel before beginning installation.
- Step 2: Mount the backplate (A) to the junction box using a phillips head screwdriver to tighten the mounting screws (C).
- Step 3: Feed the wires from the shade assembly (J) through the brass stem (I) of the pendant.
- Step 4: Secure the stem (I) to the shade assemly (J). Rotate the stem clockwise to secure firmly in place.
- Step 5: Gently slide the canopy cover (H) down the stem (I).
- Step 6: Secure the brass stem to the canopy base (G). Rotate the stem clockwise to secure firmly in place.
- Step 7: Use the wago clips (F) to connect the fixture’s wires to the corresponding wires from the junction box in the wall or ceiling. White is neutral; Black is live; Green/ Yellow is ground. One ground wire will be attached to the backplate (A), the other ground wire should come from the junction box. If needed use a wire stripper to remove 3/8” of the insulation from each wire before inserting them into the corresponding wago clip.
- Step 8: Mount canopy base (G) into the backplate using a phillips head screwdriver to tighten mounting screws (D)
- Step 9: Secure the canopy cover (H) to the canopy base (G). Rotate the canopy cover clockwise to secure firmly in place.
- Step 10: Gently squeeze the protective paper and remove from canopy cover. Discard.
- Step 11: Push lightbulb (E) into the socket of the shade assembly (I).
- Step 12: Screw the diffuser (F) into the glass holder in the shade (I). Turn the power back on at the main fuse box or circuit panel you disabled before installation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>