In Common With Fazzo Table Lamp Instruction Manual

June 12, 2024
In Common With

In-Common-LOGO

In Common With Fazzo Table Lamp

In-Common-With-Fazzo-Table-Lamp-PRODUCT

Product Information

Component Description
Part A Bulb A bulb is required for the lamp.
Part B Harp A harp was used to hold the lampshade.
Part C Finial A finial is used to secure the lampshade.
Part D Washer A washer was used to tighten the glass globe.
Part E Fazzo Shade A lampshade specifically designed for the Fazzo Table

Lamp.
Part F Globe| A glass globe that fits over the table base.
Part G Table Base| The base of the table lamp.

Product Usage Instructions

  • Step 1:
    Slide the glass globe (F) over the table base (G). Align the side hole on the glass base with the cord.

  • Step 2:
    Thread washer (D) onto the table base, tightening the globe (F) into place.

  • Step 3:
    Thread the harp (B) onto the table base (G). Leave a sliver of space between the harp and the washer. Do not overtighten the harp, this will prevent the glass base from bearing too much weight.

  • Step 4:
    Screw bulb into place (A).

  • Step 5:
    Carefully place Fazzo shade (E) onto the harp (B), feeding the threaded part through the hole in the shade.

  • Step 6:
    Screw finial (C) onto harp (B).

  • Step 7:
    Plug in the fixture and turn on the light.

How to Install Your New Light

Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source. You won’t need any additional tools.
CAUTION
As a safety feature, this lamp has a polarized plug to reduce the risk of electric shock. This means it has two flat prongs and a third circular prong underneath, and it will fit in an outlet one way only. If the plug does not fit fully and easily into the outlet, do not force it; contact a qualified electrician.

Contents

In-Common-With-Fazzo-Table-Lamp-FIG-2In Common With

  • Step 1: Slide the glass globe (F) over the table base (G). Align the side hole on the glass base with the cord.
  • Step 2: Thread washer (D) onto table base , tightening the globe (F) into place.
  • Step 3: Thread the harp (B) onto the table base (G). Leave a sliver of space between the harp and the washer. Do not overtighten the harp, this will prevent the glass base from bearing too much weight.
  • Step 4: Screw bulb into place (A).
  • Step 5: Carefully place Fazzo shade (E) onto the harp (B), feeding the threaded part through the hole in the shade.
  • Step 6: Screw finial (C) onto harp (B).
  • Step 7: Plug in the fixture and turn on the light.

incommonwith.com.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals