In Common With Gemma Floor Lamp Instruction Manual
- June 12, 2024
- In Common With
Table of Contents
In Common With Gemma Floor Lamp
Product Information
The Gemma Floor Lamp is a stylish and functional lighting solution for your home. It features a polarized plug with two flat prongs and a third circular prong underneath for safety. The lamp includes the following components:
- Part A: Base
- Part B: Mounting Screws (x3)
- Part C: Harp
- Part D: Bulb
- Part E: Gemma Shade
- Part F: Finial
Product Usage Instructions
- Step 1: Flip the stem (G) upside down. Pull the cord through the center hole in the floor base (A). Align the holes in the floor base with the holes in the stem.
- Step 2: Secure the stem (G) to the base (A) using the screws provided (B). We recommend tightening with a power driver. When secure, flip the lamp right side up, aligning the cord with the cord exit in the floor base.
- Step 3: Thread the harp (C) onto the top of the floor lamp assembly (G).
- Step 4: Screw the bulb (D) into place.
- Step 5: Align the hole of the glass shade (E) with the hardware (C), feeding it through the hole in the shade.
- Step 6: Screw the finial (F) onto the harp (C). Once attached, gently level the shade.
- Step 7: Plug in the fixture and turn on the light.
How to Install Your New Light
Please check that you received all of the components pictured in this guide.
Reach out to us if anything is missing. It’s very rare, but it happens. Don’t
forget to turn off the electrical power source.
Tools you will need that aren’t included: power driver
CAUTION
As a safety feature, this lamp has a polarized plug to reduce the risk of
electric shock. This means it has two flat prongs and a third circular prong
underneath, and it will fit in an outlet one way only. If the plug does not
fit fully and easily into the outlet, do not force it; contact a qualified
electrician.
Contents
INSTALLATION
- Step 1: Flip the stem (G) upside down. Pull the cord through the center hole in the floor base (A). Align the holes in the floor base with the holes in the stem.
- Step 2: Secure the stem (G) to the base (A) using the screws provided (B). We recommend tightening with a power driver. When secure, flip the lamp right side up, aligning the cord with the cord exit in the floor base.
- Step 3: Thread the harp (C) onto the top of the floor lamp assembly (G).
- Step 4: Screw bulb (D) into place.
- Step 5: Align the hole of the glass shade (E) with the hardware (C), feeding it through the hole in the shade.
- Step 6: Screw finial (F) onto harp (C). Once attached, gently level the shade.
- Step 7: Plug in the fixture and turn on the light.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>