CRYSTORAMA BYR-80103-MK 3-Light Matte Black Outdoor Wall Mount Lantern Sconce Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA BYR-80103-MK 3-Light Matte Black Outdoor Wall Mount Lantern
Sconce
Product Information
This product is a lighting fixture that has been designed to provide illumination for various indoor and outdoor spaces. It has a sleek and modern design that enhances the aesthetic appeal of any room or outdoor area. The fixture is wet rated, meaning it can be safely installed in areas that may be exposed to moisture or water. This makes it suitable for use in bathrooms, covered outdoor areas, and other similar locations. The product requires 3 – Candela Base Bulbs with a recommended wattage of 40 watts. The maximum wattage that can be used is 60 watts. LED bulbs are recommended for extended use. It is important to note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Failure to do so may result in electrical hazards and void the product warranty.
Assembly Instructions
WARNING
All electrical components must installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 3- Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE THE FIXTURE IS WET RATED
The product may contain lead, which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
How to install
- Make sure the power is turned off before starting the installation process.
- Attach the backplate (part I) to the desired location using the provided mounting hardware (part A).
- Secure the gecko expanders (part G) to the backplate using the tapping screws (part H).
- Attach the glass panels (part C) to the gecko expanders and secure them with the screws (part B).
- Insert the candlesleeves (part D) into the sockets.
- Insert the bulbs (part E) into the candlesleeves. Make sure to use the recommended wattage.
- Screw on the cap nuts (part F) to secure the bulbs and complete the installation.
DIMENSION
WARNING : This product can expose you to Lead which is known to the state of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Number
- A. (1) – Mounting hardware
- B. (4) – Screw
- C. (4) – Glass panel
- D. (3) – Candlesleeve
- E. (3) – Bulb (Not included)
- F. (3) – Cap Nut
- G. (2) – Gecko expander
- H. (2) – Tapping screw
- I. (1) – Backplate
Once the installation is complete, you can turn on the power and enjoy the lighting provided by this fixture.