ESR 6B014 Rebound 360 Magnetic Suspension Keyboard Case User Manual
- June 12, 2024
- ESR
Table of Contents
ESR 6B014 Rebound 360 Magnetic Suspension Keyboard Case
Product Information:
- Product Name: 100G_4C Keyboard
- Dimensions: 125x215mm
- Languages: English (EN), French (FR), Italian (IT), German (DE), Spanish (ES), Portuguese (PT), Russian (RU), Polish (PL)
Product Usage Instructions
-
Power On/Off
To turn on the keyboard, open the stand. To turn off the keyboard, close the stand. -
Bluetooth Pairing:
To enter pairing mode, press the “+” button. The LED status bar will flash quickly to indicate that the keyboard has entered pairing mode. If the LED status bar flashes slowly, it means the keyboard has not successfully entered pairing mode. -
Standby Mode:
When the keyboard is not paired, the backlight will turn off and the keyboard will enter standby mode after 5 minutes of inactivity or if not connected after 1 minute. When paired, the backlight will automatically turn off after 1 minute of inactivity. After 10 minutes of inactivity, the keyboard enters standby mode. Press any key to wake the keyboard. Note that pressing or swiping the trackpad does not wake the keyboard. -
Auto Reconnect:
When turned on, the keyboard will automatically attempt to reconnect with the last paired device for 5 seconds. -
Charging:
When the keyboard is being charged, the LED status bar turns white. It is recommended to charge the keyboard when the battery level drops below 30%. -
Backlight
To turn the backlight on/off and adjust brightness level, press the “+” button. There are three brightness levels: low, medium, and high. -
Caps Lock Factory Reset:
When caps lock is turned on, the LED status bar turns white. To perform a factory reset, hold the “+” and “-” buttons for 5 seconds while the device is powered on. The LED status bar will flash 6 times to indicate a successful factory reset.
Troubleshooting Guide
If the keyboard stops working, please follow these steps:
- Ensure the keyboard has sufficient charge. If the battery is below 30%, use the included cable to charge it.
- If the connection is unstable, restart the keyboard and unpair it by going to Settings > Bluetooth > Device List > ESR Keyboard. Then follow the Bluetooth pairing instructions to reconnect.
- If the keyboard remains unresponsive, repeat the above steps. If you still experience problems, contact customer service of the website, app, or store from which you purchased the keyboard for further assistance.
Reminder:
To prolong battery life when not using the keyboard for an extended period
of time, turn the keyboard off.
Using Your Keyboard
- Power On/Off: Open stand to turn keyboard on, close to turn off.
- Bluetooth Pairing: Press
to enter pairing mode. flashes quickly to indicate that keyboard has entered pairing mode.
*If flashes slowly, keyboard has not successfully entered pairing mode. - Standby Mode
- When not paired, after 5 minute of inactivity or if not connected after 1 minute, backlight turns off and keyboard enters standby mode.
- When paired, backlight will automatically turn off after 1 minutes of inactivity.
- After 10 minutes of inactivity, keyboard enters standby mode. Press any key to wake keyboard.
*Pressing or swiping trackpad does not wake keyboard.
- Auto Reconnect: When turned on, keyboard automatically attempts to reconnect with last paired device for 5 seconds.
- During Charging: When keyboard is being charged, turns white.
- Low Power: Charging keyboard is recommended when battery level drops below 30%.
- Backlight: Press to turn backlight on/off and adjust brightness level (low, medium, high).
- Caps Lock: When caps lock is turned on, turns white.
- Factory Reset: With device powered on, hold keys for 5 secs (LED status bar will flash 6 times to indicate factory reset is successful).
Troubleshooting Guide
- If keyboard stops working, please check the following:
- Ensure keyboard has sufficient charge. If battery is below 30%, use included cable to charge.
- If connection is unstable, restart keyboard and unpair by going to Settings > Bluetooth > Device List > “ESR Keyboard”. Then follow Bluetooth pairing instructions to reconnect.
- If keyboard remains unresponsive, repeat above steps. If still experiencing problems, contact customer service of website, app, or store that keyboard was purchased from for further assistance.
Reminder
This Bluetooth keyboard has a rechargeable battery. When not using keyboard
for an extended period of time, turn the keyboard off to prolong battery life.
FCC
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
IC
This device complies with Industry Canada licence-exempt RSS standard( s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.”
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Declaration of Conformity
This product is intended for use within Europe. Electronic Silk Road Corp.
hereby declares that this product 6B014 is in compliance with the essential
requirements and other relevant provisions of Directive
2014/53/EU,2014/35/EU,2014/30/EU. The Declaration of Conformity for the 6B014
is available from www.esrgear.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>