CRYSTORAMA HAY-1409-PN Hayes 32 Light Chandelier Instruction Manual

CRYSTORAMA HAY-1409-PN Hayes 32 Light Chandelier

Product Information

• This product is a lighting fixture with model number HAY-1409-PN. It has been in the market for sixty years, providing reliable lighting solutions. The fixture comes with a safety cable due to its weight, which is over 50lbs. It should be mounted to the ceiling independently of the outlet box. The fixture is dry rated, meaning it is suitable for indoor use in dry locations.
• The installation of electrical components should be done by a licensed electrician in accordance with the National Electric Code and local electrical codes to ensure safety.
• The fixture requires 32-Candelabra Base Bulbs with a recommended wattage of 25 Watts and a maximum wattage of 25 Watts. It is recommended to use LED bulbs for extended use.
  Caution : This product contains lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Product Usage Instructions

1. Before starting the installation process, make sure the power is turned off to avoid electrical danger.
2. Follow the steps below to install the fixture:
3. Screw the threaded pipe into the coupler and slide the metal tube over the threaded pipe.
4. Slide the check ring over the top of the metal tube and secure it with the fixture loop.
5. Attach the fixture into the outlet box using the provided safety cable.
6. Install bulbs (not included) into the fixture.
7. Connect the power.
8. When dressing the fixture, start with the crystal labeled (A) and apply the crystal sets in alphabetical order.
9. For the installation of the safety cable, follow these steps:
10. Pass the long threaded pipe on the hickey through the center of the outlet box. Attach it to the ceiling joist and secure it with nuts.
11. Feed the wires and safety cable up through the chain and the hole of the screw collar loop. Have the wires and safety cable exit through the side of the hickey.
12. Feed the safety cable through the cable lock and coil it around the hickey twice. Then feed the cable through the lock again and tighten it with a lock screw.
13. Continue to run the safety cable through the top of the outlet box and secure it to the ceiling joist.

Note : For any additional information or clarification, refer to the detailed illustration provided in the user manual.

There is a safety cable supplied with this fixture, as it weighs over 50lbs. The fixture should be mounted to the ceiling independent of the outlet box.

WARNING:

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
You will need 32-Candelabra Base Bulb 25 Watts Recommended 25 Watts Max

USE LED BULBS FOR EXTENDED USE

• This fixture is Dry rated

DIMENSION

How to Install

1. Screw the threaded pipe into the coupler and slide the metal tube over the threaded pipe. Slide check ring over the top of metal tube and secure with fixture loop.
2. After safety attaching fixture into outlet box, install bulbs (not included) and proceed to connecting the power.
3. When you begin to dress the fixture, start with crystal labeled (A).
4. IMPORTANT: Apply crystal sets in alphabetical order.

DETAILED ILLUSTRATION

Installation of Safety Cable

1. Pass the long threaded pipe on the hickey through the center of outlet box.Attach it to the ceiling joist and secure it with nuts.
2. Feed wires and safety cable up through chain and the hole of screw collar loop. Have the wires and safety cable exit through the side of hickey.
3. Feed safety cable through the cable lock and coil it around the hickey twice.Then feed the cable through the lock again and tighten it with lock screw.
4. Continue to run safety cable through the top of outlet box and secure it to the ceiling joist

Crystal Sets

• A. 80Sets. (1)30x400mm
• B. 64Sets. (1)30x300mm
• C. 80Sets. (1)30x200mm

WARNING : This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Part Number

• A. (2)-Wire Connector
• B. (1)-Heavy Duty Mounting Hardware
• C (1)-Canopy; w5″xh1.25″ (XFB1407PNCAN5IN)
• D (1)-Collar Ring
• E (1)-Collar Loop
• F (1)-Chain; 72″, 6mm (XFB1409PNCHA6MM)
• G (1)-Cable Wire
• H (1)-Ground Wire
• I (1)-Fixture Loop
• J (1)-Metal Tube; 10″, 25MM thickness (XFB1409PNROD10IN)
• K (1)-Threaded Pipe; 10″, 20MM thickness (XFB1409PNSTEM10IN)
• L. (1)-Check Ring
• M. (1)-Metal Frame

PART BAGⅠ: Includes Parts A
PART BAGⅡ: Includes Parts B,D,E
MODEL # HAY-1409-PN

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>