Whirlpool W7_OM44S1PBLAUS 60cm Multi-Function Self Clean Electric Oven User Guide
- June 13, 2024
- Whirlpool
Table of Contents
- Whirlpool W7_OM44S1PBLAUS 60cm Multi-Function Self Clean Electric Oven
- Product Information
- Product Usage Instructions
- PRODUCT DESCRIPTION
- CONTROL PANEL DESCRIPTION
- ACCESSORIES
- FUNCTIONS
- FIRST TIME USE
- DAILY USE
- COOKING TABLE
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Whirlpool W7_OM44S1PBLAUS 60cm Multi-Function Self Clean Electric Oven
Product Information
Thank you for purchasing a Whirlpool product. To receive complete assistance, please register your product on www.whirlpool.eu/register.
Product Description
- Control panel
- Fan
- Circular heating element (not visible)
- Shelf guides
- Door
- Upper heating element/grill
- Lamp
- Meat probe insert point
- Identification plate (do not remove)
- Lower heating element (not visible)
Control Panel Description
- ON / OFF: For switching the oven on and off and for stopping an active function.
- FUNCTIONS DIRECT ACCESS: For quick access to the functions and menu.
- NAVIGATION BUTTON MINUS: For scrolling through a menu and decreasing the settings or values of a function.
- BACK: For returning to the previous screen. During cooking, allows settings to be changed.
DISPLAY
- CONFIRM: For confirming a selected function or a set value.
- NAVIGATION BUTTON PLUS: For scrolling through a menu and increasing the settings or values of a function.
- OPTIONS / FUNCTIONS DIRECT ACCESS: For quick access to the functions, duration, settings, and favorites.
- START: For starting a function using the specified or basic settings.
Accessories
- Wire Shelf: Use to cook food or as a support for pans, cake tins, and other ovenproof items of cookware.
- Drip Tray: Use as an oven tray for cooking meat, fish, vegetables, etc. Position underneath the wire shelf to collect cooking juices.
- Baking Tray: Use for cooking all bread and pastry products, but also for roasts, fish en papillotte, etc.
- *Sliding Runners:** Use to facilitate inserting or removing accessories.
- *Meat Probe:** Use to measure the core temperature of food during cooking.
*Available only on certain models. The number and type of accessories may vary depending on the purchased model. Other accessories can be purchased separately from the After-sales Service.
Product Usage Instructions
Inserting the Wire Shelf and Other Accessories
- Insert the wire shelf horizontally by sliding it across the shelf guides, making sure that the side with the raised edge is facing upwards.
- Other accessories, such as the drip tray and the baking tray, are inserted horizontally in the same way as the wire shelf.
Fitting the Sliding Runners (if present)
- Remove the shelf guides from the oven and remove the protective plastic from the sliding runners.
- Fasten the upper clip of the runner to the shelf guide and slide it along as far as it will go.
- Lower the other clip into position.
- To secure the guide, press the lower portion of the clip firmly against the shelf guide. Make sure that the runners can move freely. Repeat these steps on the other shelf guide on the same level.
Note: The sliding runners can be fitted on any level.
Using the Meat Probe (if present)
- Insert the food probe deep into the meat, avoiding bones or fatty areas. For poultry, insert the probe lengthways into the center of the breast, avoiding hollow areas.
- Place the food in the oven and connect the plug by inserting it into the connection provided on the right-hand side of the oven’s cooking compartment.
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please register your product
on www.whirlpool.eu/register
Before using the appliance carefully read the Safety Instruction.
PRODUCT DESCRIPTION
- Control panel
- Fan
- Circular heating element (not visible)
- Shelf guides (the level is indicated on the front of the oven)
- Door
- Upper heating element/grill
- Lamp
- Meat probe insert point
- Identification plate (do not remove)
- Lower heating element (not visible)
CONTROL PANEL DESCRIPTION
-
ON / OFF
For switching the oven on and off and for stopping an active function. -
FUNCTIONS DIRECT ACCESS For quick access to the functions and menu.
-
NAVIGATION BUTTON MINUS For scrolling through a menu and decreasing the settings or values of a function.
-
BACK
For returning to the previous screen.
During cooking, allows settings to be changed. -
DISPLAY
-
CONFIRM
For confirming a selected function or a set value. -
NAVIGATION BUTTON PLUS For scrolling through a menu and increasing the settings or values of a function.
-
OPTIONS / FUNCTIONS DIRECT ACCESS
For quick access to the functions, duration, settings and favorites. -
START
For starting a function using the specified or basic settings.
ACCESSORIES
-
WIRE SHELF
Use to cook food or as a support for pans, cake tins and other ovenproof items of cookware. -
DRIP TRAY
Use as an oven tray for cooking meat, fish, vegetables, focaccia, etc. or position underneath the wire shelf to collect cooking juices. -
BAKING TRAY
Use for cooking all bread and pastry products, but also for roasts, fish en papillotte, etc. -
**SLIDING RUNNERS***
To facilitate inserting or removing accessories. -
**MEAT PROBE***
To measure the core temperature of food during cooking. -
Available only on certain models
The number and the type of accessories may vary depending on which model is purchased. Other accessories can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER ACCESSORIES
Insert the wire shelf horizontally by sliding it across the shelf guides,
making sure that the side with the raised edge is facing upwards.
Other accessories, such as the drip tray and the baking tray, are inserted
horizontally in the same way as the wire shelf.
REMOVING AND REFITTING THE SHELF GUIDES
- To remove the shelf guides, lift the guides up and then gently pull the lower part out of its seating: The shelf guides can now be removed.
- To refit the shelf guides, first fit them back into their upper seating. Keeping them held up, slide them into the cooking compartment, then lower them into position in the lower seating.
FITTING THE SLIDING RUNNERS (IF PRESENT)
Remove the shelf guides from the oven and remove the protective plastic from
the sliding runners.
Fasten the upper clip of the runner to the shelf guide and slide it along as
far as it will go. Lower the other clip into position.
To secure the guide, press the lower portion of the clip firmly against the
shelf guide. Make sure that the runners can move freely. Repeat these steps on
the other shelf guide on the same level.
USING THE MEATPROBE (IF PRESENT)
Insert the food probe deep into the meat, avoiding bones or fatty areas. For
poultry, insert the probe lengthways into the centre of the breast, avoiding
hollow areas.
Place the food in the oven and connect the plug by inserting it into the
connection provided on the righthand side of the oven’s cooking compartment.
FUNCTIONS
6th SENSE
These allow a fully automatic cooking for all types of food (Lasagna, Meat,
Fish, Vegetables, Cakes & Pastries, Salt cakes, Bread, Pizza).
To get the best from this function, follow the indications on the relative
cooking table.
COOK 4
For cooking different foods that require the same cooking temperature on four
levels at the same time. This function can be used to cook cookies, cakes,
round pizzas (also frozen) and to prepare a complete meal. Follow the cooking
table to obtain the best results.
FORCED AIR
For cooking different foods that require the same cooking temperature on
several shelves
(maximum three) at the same time. This function can be used to cook different
foods without odours being transferred from one food to another.
TRADITIONALS
-
CONVECT BAKE
For cooking meat, baking cakes with fillings on one shelf only. -
TURBO GRILL
For roasting large joints of meat (legs, roast beef, chicken). We recommend using a drip tray to collect the cooking juices: Position the pan on any of the levels below the wire shelf and add 500 ml of drinking water. -
FROZEN BAKE
The function automatically selects the ideal cooking temperature and mode for 5 different types of ready frozen food. The oven does not have to be preheated. -
SPECIAL FUNCTIONS
-
MAXI COOKING
The function automatically selects the best cooking mode and temperature to cook large joints of meat (above 2.5 kg). It is advisable to turn the meat over during cooking, to obtain even browning on both sides. It is best to baste the meat every now and again to prevent it from drying out. -
RISING
For optimal proving of sweet or savoury dough. To maintain the quality of proving, do not activate the function if the oven is still hot following a cooking cycle. -
DEFROSTING
To speed up defrosting of food. Place food on the middle shelf. Leave food in its packaging to prevent it from drying out on the outside. -
KEEP WARM
For keeping just-cooked food hot and crisp. -
ECO FORCED AIR
For cooking stuffed roasting joints and fillets of meat on a single shelf. Food is prevented from drying out excessively by gentle, intermittent air circulation. When this ECO function is in use, the light will remain switched off during cooking. To use the ECO cycle and therefore optimise power consumption, the oven door should not be opened until the food is completely cooked.
-
CONVENTIONAL
For cooking any kind of dish on one shelf only.
GRILL
For grilling steaks, kebabs and sausages, cooking vegetables au gratin or
toasting bread. When grilling meat, we recommend using a drip tray to collect
the cooking juices: Position the tray on any of the levels below the wire
shelf and add 500 ml of drinking water.
FAST PREHEAT
For preheating the oven quickly.
TIMERS
For editing function time values.
MINUTEMINDER
For keeping time without activating a function.
AUTOMATIC OVEN CLEANING – PYRO
For eliminating cooking spatters using a cycle at very high temperature. Two
selfcleaning cycles are available: A complete cycle (Pyro) and a shorter cycle
(Pyro Eco). We recommend using the quicker cycle at regular intervals and the
complete cycle only when the oven is heavily soiled.
FAVORITE
For retrieving the list of 10 favorite functions.
SETTINGS
For adjusting the oven settings.
When “ECO” mode is active the brightness of the display will be reduced to
save energy and lamp switches off after 1 minute. It will be reactivated
automatically whenever any of the buttons are pressed.
When “DEMO” is “On” all commands are active and menus available but the oven
doesn’t heat up. To deactivate this mode, access “DEMO” from “SETTINGS” menu
and select “Off”.
By selecting “FACTORY RESET”, the product switches off and then it returns to
first switch on. All settings will be deleted.
FIRST TIME USE
-
SELECT THE LANGUAGE
You will need to set the language and the time when you switch on the appliance for the first time: “English” will show on the display.
Press +or- to scroll through the list of available languages and select the one you require.
Press to confirm your selection.
Please note: The language can subsequently be changed by selecting “LANGUAGE” in “SETTINGS” menu, available by pressing . -
SET THE POWER CONSUMPTION
The oven is programmed to consume a level of electrical power that is compatible with a domestic network that has a rating of more than 3 kW (16): If your household uses a lower power, you will need to decrease this value (13). Press +or- to select 16 “High” or 13 “Low” and press to confirm. -
SET THE TIME
After selecting the power, you will need to set the current time: The two digits for the hour will flash on the display.
Press or to set the current hour and press : The two digits for the minutes will flash on the display. Press or to set the minutes and press to confirm.
Please note: You may need to set the time again following lengthy power outages. Select “CLOCK” in “SETTINGS” menu, available by pressing . -
HEAT THE OVEN
A new oven may release odours that have been left behind during manufacturing: this is completely normal. Before starting to cook food, we therefore recommend heating the oven with it empty in order to remove any possible odours. Remove any protective cardboard or transparent film from the oven and remove any accessories from inside it. Heat the oven to 200 °C for around one hour, ideally using a function with air circulation (e.g. “Forced Air” or “Convection Bake”).
Please note: It is advisable to air the room after using the appliance for the first time.
DAILY USE
SELECT A FUNCTION
Press ! to switch on the oven: the display will show the last running main
function or the main menu.
The functions can be selected by pressing the icon for one of the main
functions or by scrolling through a menu: To select an item from a menu (the
display will show the first available item), press +or- to select the desired
one, then press to confirm.
SET THE FUNCTION
After having selected the function you require, you can change its settings.
The display will show the settings that can be changed in sequence. Pressing
allows you to change the previous setting again.
TEMPERATURE / GRILL LEVEL
When the value flashes on the display, press+ or- to change it, then press to
confirm and continue with the settings that follow (if possible).
In the same way, it is possible to set the grill level: There are three
defined power levels for grilling: 3 (high), 2 (mid), 1 (low).
Please note: Once the function has been activated, the temperature/grill level can be changed using +or- .
DURATION
When the icon flashes on the display, press +or- to set the cooking time you
require and then press to confirm. You do not have to set the cooking time if
you want to manage cooking manually (untimed): Press +or- to confirm and start
the function. By selecting this mode, you cannot program a delayed start.
Please note: You can adjust the cooking time that has been set during
cooking by pressing : press or to amend it and then press to confirm.
END TIME (START DELAY)
In many functions, once you have set a cooking time you can delay starting the
function by programming its end time. The display shows the end time while the
icon flashes.
Press +or- to set the time you want cooking to end, then press to confirm and activate the function. Place the food in the oven and close the door: The function will start automatically after the period of time that has been calculated in order for cooking to finish at the time you have set.
Please note: Programming a delayed cooking start time will disable the oven preheating phase: The oven will reach the temperature your require gradually, meaning that cooking times will be slightly longer than those listed in the cooking table. During the waiting time, you can press +or- to amend the programmed end time or press to change other settings. By pressing , in order to visualize information, it is possible to switch between end time and duration.
6th SENSE
mode, temperature and duration to cook, roast or bake all the dishes
available.
When required, simply indicate the characteristic of food to obtain an optimal
result.
WEIGHT / HEIGHT (ROUND-TRAY-LAYERS)
To set the function correctly, follow the indications on the display, when prompted, and press or to set the required value then press to confirm.
DONENESS / BROWNING
In some 6th Sense functions it is possible to adjust the doneness level.
When prompted, press +or- to select the desired level between rare (-1) and
well done (+1). Press+ or -to confirm and start the function.
In the same way, where allowed, in some 6th Sense functions, it’s possible to
adjust the browning level between low (-1) and high (+1).
START THE FUNCTION
At any time, if the default values are those desired or once you have applied
the settings you require, press to activate the function.
During the delay phase, press to skip this phase and start the function
immediately.
Please note: Once a function has been selected, the display will
recommend the most suitable level for each function. At any time you can stop
the function that has been activated by pressing ! .
If the oven is hot and the function requires a specific maximum temperature, a
message will shown on the display. Press to return to previous screen and
select a different function or wait for a complete cooling.
PREHEATING
Some functions have an oven preheating phase: Once the function has started,
the display indicates that the preheating phase has been activated.
PREHEATING
Once this phase has finished, an audible signal will sound and the display will indicate that the oven has reached the set temperature, requiring to “ADD FOOD”. At this point, open the door, place the food in the oven, close the door and start cooking by pressing or – .
Please note: Placing the food in the oven before preheating has finished
may have an adverse effect on the final cooking result. Opening the door
during the preheating phase will stop pause it.
The cooking time does not include a preheating phase. You can always change
the temperature you want the oven to reach using or .
PAUSE COOKING / TURN OR CHECK FOOD
By opening the door, the cooking will be temporarily paused through
deactivating heating elements.
To resume the cooking, close the door.
Some 6th Sense functions will require the food to be turned during cooking.
An audible signal will sound and the display shows the action to be done. Open
the door, do the action prompted by the display and close the door, then press
to continue cooking.
In the same way, at 10% of time before the end of cooking, the oven prompts
you to check the food.
An audible signal will sound and the display shows the action to be done. Check the food, close the door and press or to continue cooking.
Please note: Press to skip these actions. Otherwise, if no action is done after a certain time the oven will continue the cooking.
END OF COOKING
An audible signal will sound and the display will indicate that cooking is
complete.
Press to continue cooking in manual mode (untimed) or press to extend the cooking time by setting a new duration. In both cases, the cooking parameters will be retained.
BROWNING
Some functions of the oven enable you to brown the surface of the food by
activating the grill once cooking is complete.
When the display shows the relevant message, if required press to start a five-minute browning cycle. You can stop the function at any time by pressing to switch the oven off.
FAVORITES
Once cooking is complete the display will prompt you to save the function in a
number between 1 and 10 on your list of favorites.
If you would like to save a function as a favorite and store the current
settings for future use, press otherwise, to ignore the request press .
Once has been pressed, press the or to select the number position, then press
to confirm.
Please note: If the memory is full or the number chosen has already been
taken, the oven will ask you to confirm overwriting the previous function.
To call up the functions you have saved at a later time, press : The display
will show your list of favorite functions.
Press +or- to select the function, confirm by pressing +, – and then press to activate.
AUTOMATIC CLEANING – PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven during and after (until the room
has finished airing) running the Pyro cycle.
Remove all accessories – including shelf guides – from the oven before
activating the function. If the oven is installed below a hob, make sure that
all the burners or electric hotplates are switched off while running the self-
cleaning cycle. For optimum cleaning results, remove excessive residuals
inside the cavity and clean the inner door glass before using the Pyro
function. We recommend only running the Pyro function if the appliance
contains heavy soiling or gives off bad odours during cooking.
Press to show “Pyro” on the display.
Press +or- to select the desired cycle, then press to confirm. Once a cycle
has been selected, if desired, press +or- to set end time (start delay), then
press to confirm.
Clean the door and remove all accessories as prompted, then close the door and
press when done: the oven will begin the self-cleaning cycle, while the door
locks automatically: a warning message appears on the display, along with a
countdown indicating the status of the cycle in progress.
Once the cycle has been completed, the door remains locked until the
temperature inside the oven has returned to a safe level.
MINUTEMINDER
When the oven is switched off, the display can be used as a timer. To activate
this function, make sure that the oven is switched off and press + or – The
icon will flash on the display.
Press +or- to set the length of time you require and then press to activate
the timer.
An audible signal will sound and the display will indicate once the minuteminder has finished counting down the selected time.
Please note: The minuteminder does not activate any of the cooking
cycles. Press +or- to change the time set on the timer.
Once the minuteminder has been activated, you can also select and activate a
function.
Press to switch on the oven and then select the function you require.
Once the function has started, the timer will continue to count down
independently without interfering with the function itself.
Please note: During this phase, it isn’t possible to see the minuteminder (only the icon will be displayed), that will continue counting down in background. To retrieve the minuteminder screen press ! to stop the function that is currently active.
KEYLOCK
To lock the keypad, press and hold for at least five seconds. Do this again
to unlock the keypad.
Please note: This function can also be activated during cooking. For safety reasons, the oven can be switched off at any time by pressing .
USING THE MEAT PROBE (IF PRESENT)
Using the probe enables you to measure the core temperature of the meat during
cooking to ensure that it reaches the optimum temperature. The temperature of
the oven varies according to the function that you have selected, but cooking
is always programmed to finish once the specified temperature has been
reached. Once you have inserted the probe, an audible signal is activated and
“Probe Plugged” appears on the display.
Select the function you require from those that are compatible (Conventional,
Forced Air, Convection Bake, Turbogrill, Eco Forced Air, Maxi Cooking,
6th Sense functions): The display prompts to set the target temperature of the
probe: Press +or- to set it and press to set the following cooking
parameters.
As cooking is programmed to finish once the required temperature has been
reached, it is not possible to set the cooking time or set a specific time for
cooking to end. The light will remain switched on until the probe is removed.
If the probe is removed during cooking, it will continue by the traditional
mode (untimed).
An audible signal will sound and the display will indicate when the probe has
reached the required temperature.
Please note: To change the settings subsequently, press +or- for the probe temperature press +or- for other settings. An audible signal and a message will tell you if use of the probe is not compatible with the action done. If this is the case, remove the probe.
COOKING TABLE
Only in some models. Function available only in combination with the Meat
probe.
Suggested quantity.
Estimated length of time: dishes can be removed from the oven at different
times depending on personal preference.
Turn food halfway through cooking.
Turn food two thirds of the way through cooking (if necessary).
HOW TO READ THE COOKING TABLE
The table lists the best function, accessories and level to use to cook
different types of food. Cooking times start from the moment food is placed in
the oven, excluding preheating
(where required). Cooking temperatures and times are approximate and depend on
the amount of food and the type of accessory used. Use the lowest recommended
settings to begin with and, if the food is not cooked enough, then switch to
higher settings. Use the accessories supplied and preferably darkcoloured
metal cake tins and baking trays. You can also use Pyrex or stoneware pans and
accessories, but bear in mind that cooking times will be slightly longer.
CLEANING AND MAINTENANCE
Make sure that the oven has cooled down before carrying out any maintenance or
cleaning.
Do not use steam cleaners.
Do not use wire wool, abrasive scourers or abrasive/corrosive cleaning agents,
as these could damage the surfaces of the appliance.
Wear protective gloves.
The oven must be disconnected from the mains before carrying out any kind of
maintenance work.
EXTERIOR SURFACES
- Clean the surfaces with a damp microfibre cloth. If they are very dirty, add a few drops of pH-neutral detergent. Finish off with a dry cloth.
- Do not use corrosive or abrasive detergents. If any of these products inadvertently comes into contact with the surfaces of the appliance, clean immediately with a damp microfibre cloth.
INTERIOR SURFACES
- After every use, leave the oven to cool and then clean it, preferably while it is still warm, to remove any deposits or stains caused by food residues. To dry any condensation that has formed as a result of cooking foods with a high water content, let the oven to cool completely and then wipe it with a cloth or sponge.
- Clean the glass in the door with a suitable liquid detergent.
- The oven door can be removed to facilitate cleaning.
ACCESSORIES
Soak the accessories in a washing-up liquid solution after use, handling them
with oven gloves if they are still hot. Food residues can be removed using a
washing-up brush or a sponge.
REMOVING AND REFITTING THE DOOR
-
To remove the door, open it fully and lower the catches until they are in the unlock position.
-
Close the door as much as you can. Take a firm hold of the door with both hands – do not hold it by the handle.
Simply remove the door by continuing to close it while pulling it upwards at the same time until it is released from its seating. Put the door to one side, resting it on a soft surface. -
Refit the door by moving it towards the oven, aligning the hooks of the hinges with their seating and securing the upper part onto its seating. Lower the door and then open it fully.
-
Lower the catches into their original position: Make sure that you lower them down completely.
Apply gentle pressure to check that the catches are in the correct position.
- Try closing the door and check to make sure that it lines up with the control panel. If it does not, repeat the steps above: The door could become damaged if it does not work properly.
REPLACING THE LAMP
- Disconnect the oven from the power supply.
- Unscrew the cover from the light, replace the bulb and screw the cover back on the light.
- Reconnect the oven to the power supply.
Please note: Only use 20-40 W/230 ~ V type G9, T300°C halogen bulbs. The
bulb used in the product is specifically designed for domestic appliances and
is not suitable for general room lighting within the home (EC Regulation
244/2009). Light bulbs are available from our After-sales Service.
– If using halogen bulbs, do not handle them with your bare hands as your
fingerprints could cause damage. Do not use the oven until the light cover has
been refitted.
TROUBLESHOOTING
PROBLEM | POSSIBLE CAUSE | SOLUTION |
---|---|---|
The oven is not working. | Power cut. | |
Disconnection from the mains. | Check for the presence of mains electrical |
power and whether the oven is connected to the electricity supply. Turn off
the oven and restart it to see if the fault persists.
The display shows the letter “F” followed by a number or letter.| Oven
failure.| Turn off the oven and restart it to see if the problem persists. Try
to perform the “FACTORY RESET” from, selectable from “SETTINGS”. Contact you
nearest Client After-sales Service Centre and state the number following the
letter “F”.
The oven does not heat up.| When “DEMO” is “On” all commands are active and
menus available but the oven doesn’t heat up. DEMO appears on display every 60
seconds.| Access “DEMO” from “SETTINGS” and select “Off”.
The light switches off.| “ECO” mode is “On”.| Acceed “ECO” from “SETTINGS” and
select “Off”.
The door will not open.| Cleaning cycle in progress.| Wait for the function to
finish and for the oven to cool down.
The home power goes off.
| ****
Power setting wrong.
| Verify if your domestic network has at least a rating of more than 3 kW. If no, decrease the power to 13 Ampere. Access “POWER” from “SETTINGS” and select “LOW”.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
- Visiting our website docs . whirlpool . eu
- Using QR Code
- Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product’s identification plate.
For markets outside Europe:
To register your product and to receive more comprehensive local help and
support, please call the number shown on the warranty booklet specific to your
country or follow the website’s instructions on:
Australia: www.whirlpool.com.au
Hong Kong: www.whirlpool.com.hk
New Zealand: www.whirlpool.co.nz
Singapore: www.whirlpool.com.sg
South Korea: www.whirlpool.co.kr
Taiwan: www.whirlpool.com.tw
Vietnam: www.whirlpool.com.vn
References
- Whirlpool Australia | Kitchen & Laundry Appliances
- Whirlpool Australia | Kitchen & Laundry Appliances
- Whirlpool Singapore | Home appliances | Kitchen appliances | Electrical Appliances
- 台灣惠而浦 Whirlpool
- Trang chủ - Whirlpool
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>