Inateck FE2013 Ultra slim 2.5 Inch HDD Enclosure User Manual
- June 12, 2024
- inateck
Table of Contents
FE2013 Ultra slim 2.5 Inch HDD Enclosure
User Manual
FE2013 Ultra slim 2.5 Inch HDD Enclosure
Installation Steps
- Slide the two parts in opposite directions to open the cover.
- Lay the hard drive into the enclosure and then paste the sponge pad to the internal side of the shell.
Product specifications
| Product Model | Inateck FE2013 |
|---|---|
| Material/ Weight/ Dimensions | ABS/ 87g/ 132x81x15mm |
| Supported Hard Drive Interface | SATA III/II/I |
| Supported Hard Drive Height | Height of up to 9.5mm HDD/SSD supported |
| Licenses | CE, FCC |
Package List
1x Inateck FE2013
1x USB 3.0 data cable
1x Instruction manual
1x Sponge pad
Cautions
a. When removing the data storage device, please stop accessing and
transferring data first. Forced removal may lead to corruption or loss of
crucial data.
b. To ensure normal performance of the hard drive enclosure, the rated power
of the hard drive should be lower than 5V/0.9A, which is the rated output
power of a USB port.
c. The thickness of 2.5” hard disk is different, therefore, a sponge pad is
offered. Users are suggested to paste the sponge to the internal side of the
shell to avoid hard drive sliding when installing a thin hard drive.
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including
interference that may cause undesired operation.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive
2014/30/EU.
A copy of the Declaration of Conformity can be accessed from
https://www.inateck.depages/euro-compliance.
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street,
Longgang District, Shenzhen, Guangdong, China
F &M Technology
GmbH FraunhoferstraBe 7, 04178 Leipzig, Deutschland Tel: +49 341 5199 8410