CRYSTORAMA AND-9207-CL-MK Andover One Light Outdoor Post Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA AND-9207-CL-MK Andover One Light Outdoor Post Mount
Safety Warning
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes.
You will need 1 – Medium Bulb 60 Watts Recommended 100 Watts Max. (Bulb not
included) USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS WET RATED
How to Install
- To install the glass shade, separate the Bottom Cage by removing the Nut.
- Insert the Glass Shade into the Bottom Cage.
- Install the bulb into the socket.
- Attach the Bottom Cage to the Top Cage by screwing a Nut securing the two together.
- Place the fixture over the post and mark 3 points on the post at the center of each hole on the post fitter.
- Drill the holes at the marked points
- Make the wire connections then place the fixture base over the post and secure down by tightening the screws
Glass Replacement:
Follow instruction steps #1-7, in reverse, skipping step #3, #5 and #6.
Bulb Replacement (Bulb not included):
Follow instruction steps #1-7, in reverse, skipping step #5 and #6.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
Part Numbers
- A. (1)-Top Cage
- B. (1)-Glass Shade; W5.75″ x H6.5″; XHX9201GLA6.5IN
- C. (4)-Nut; XHX9201MKNUT
- D. (1)-Bottom Cage
- E. (1)-Socket
- F. (1)-Fitter
- G. (3)-Screws
- H. (1)-Post (Not Included)
Dimensions