CRYSTORAMA 2264-AG-LED Bathroom Vanity Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
ASSEMBLY INSTRUCTION MODEL#2264-AG-LED
Instruction Manual
2264-AG-LED Bathroom Vanity
It can be mounted both vertically and horizontally.
HOW TO REPLACE LED:
REMOVE METAL FRAME AND SCREWS TO REPLACE PREVIOUS LED.
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 1 LED Module, 26 Watts Bulb included.
This fixture is Damp rated
How to install
- Place the mounting plate over the outlet box. Mark two points on the wall at the center of keyhole on the mounting plate.
- Drill two holes at the marked points and insert the wall anchors.
- Place the mounting plate over the outlet box and secure it with outlet box screws. Insertand tighten the anchor screws into the wall anchors until snug.
- Install backplate onto the mounting plate, and secure with the mounting screws.
- Place the glass shade inside the metal frame and secure it with the clips.
- Install metal frame onto the backplate, and secure with the side screws.
WARNING: This product can expose you to Lead which is known to the state
of California to cause cancer and/or birth defects or reproductive harm.
For more information go to
www.P65Warnings.ca.gov
Part Number
Part Numbers
A. (1)-Mounting hardware
B. (1)-Mounting plate
C. (1)-Backplate L23-5/8’’xW4-1/2’’xH3/4’’ #XRF2264AGBKP23.625IN
D. (4)-Mounting screw
E. (1)-Glass shade #XRF2264LGLA23.75IN
F. (4)-Side screw
G. (1)-Metal frame
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>