NEXIGO 1588 Wall Mount with Controller Charging Dock User Manual
- June 12, 2024
- NEXIGO
Table of Contents
NEXIGO 1588 Wall Mount with Controller Charging Dock
Product Information:
The NexiGo 1588 Wall Mount with Controller Charging Dock for PS5 is designed to organize your PS5 console and can support both Digital and Disc versions. The included controller charging docks can simultaneously charge two PS5 controllers in approximately 3 hours. Each controller charging dock comes with an LED indicator to display the charging status at a glance. An orange light indicates that the attached controller is charging, while a blue light indicates that the attached controller is fully charged.
Thank you for choosing the NexiGo 1588 Wall Mount with Controller Charging Dock for PS5! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com at any time for further assistance. This product is covered by our industry leading 1-year manufacturers warranty. Register at nexigo.com/warranty or scan the QR code to get a FREE additional 1-year warranty! From all of us here at NexiGo, we want to welcome you again to the family. We thank you deeply for your trust and for your business. We know you’ll love it here. We look forward to serving you again in the near future.
Yours Sincerely,
The NexiGo Team
PRODUCT INTRODUCTION
This Wall Mount with Controller Charging Dock is designed to organize your PS5 console and can support both Digital and Disc versions. The included controller charging docks can simultaneously charge two PS5 controllers in ~3 hours. Each controller charging dock comes with a LED indicator to display the charging status at a glance. An orange light indicates that the attached controller is charging. A blue light indicates that the attached controller is fully charged.
PRODUCT OVERVIEW
- Console Wall Mount
- Controller Charging Dock
- Controller Charging Indicators
- Controller Charging Slots
- USB-C to USB-C Charging Cable
- Headset Holder
SPECIFICATIONS
The product specifications are as follows:
- Power Input: DC 5V 3A (Power the charging dock with the provided USB cable).
- Power Output: DC 5V 1A for each charging port.
- Charging Time: Fully charge two controllers simultaneously in approximately 3 hours.
- Charging Indicators: Orange – Charging, Blue – Fully charged/standby.
Note : The PS5 DualSense controller comes with a built-in protective charge limiter. When the unit is charged above 80% capacity and removed from the charger, it will not charge again until it falls back under 80% charge.
WHAT’S IN THE BOX?
- Console Wall Mount x1
- Controller Charging Dock x1
- PS5 Connector Screw x1
- Charging Cable x1
- Charging Dock Connector Screw x2
- Headset Holder x1
- Screws x4
- Wall Anchors x4
- User Manual x1
Product Usage Instructions:
Step 1: Attach the controller charging dock to the wall mount. Locate the
installation slot at the bottom of the controller charging dock and affix it
to the mount using the provided charging dock connector screw.
Step 2: Position the console wall mount at an appropriate location on the
wall. Use a level to ensure that the mount is level on the wall. Mark each
hole carefully with a pencil or pen to ensure that the item is mounted in the
correct location.
Step 3:
Drill a 6mm hole at each mark (Drill and drill bit NOT INCLUDED).
Step 4:
Insert a wall anchor into each hole and hammer in the wall anchors so they are
nearly flush with the wall surface (Hammer NOT INCLUDED).
Step 5:
Insert screws into the wall anchors, but do NOT fully insert the screws into
the wall. Leave approximately ¼ to ½ of an inch of the screw sticking out of
the wall (Screwdriver NOT INCLUDED).
Step 6:
Slide the console wall mount onto the screws, and then slide the items down to
ensure they are firmly attached.
Step 7:
Tighten the screws with the screwdriver(not included) to ensure that the
console wall mount is firm and secure. The wall mount is ready to use!
Step 8:
Place the PS5 console on the console wall mount and affix the console to the
mount using the provided PS5 connector screw.
Step 9:
Insert the USB Type-C connector for the power cable into the power input port
of the controller charging dock and insert the other USB Type-C connector into
the console.
Step 10:
Your controller charging dock is now ready to charge your PS5 controllers!
NOTES
- SAFETY WARNING: HAZARD-Small Parts-Not intended for children under 5 years of age.
- Power the charging dock with the provided USB cable.
- Other Type-C power supplies may cause charging failure or extended charging duration.
- To ensure the longevity and lifespan of the wall mount do not place any objects other than the console or accessories on the wall mount. Keep this product dry.
- This product cannot be used and/or stored in high humidity conditions.
- When this unit is not in use or when docked controllers are fully charged, it is recommended that you unplug it from the power source
If you have any problems or need further assistance, please contact NexiGo customer support at cs@nexigo.com or call +1(458) 215-6088. Thank you for choosing NexiGo!
FCC REQUIREMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
WEEE
CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
CONTACT INFORMATION
Website:www.nexigo.com
Manufacturer: Nexight INC
Email:cs@nexigo.com
Tel: +1(458) 215-6088
Address: 11075 SW 11th St, Beaverton, OR 97005, US
Documents / Resources
|
NEXIGO 1588 Wall Mount with Controller Charging
Dock
[pdf] User Manual
1588 Wall Mount with Controller Charging Dock, 1588, Wall Mount with
Controller Charging Dock, Mount with Controller Charging Dock, Controller
Charging Dock, Charging Dock, Dock
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>