jura GIGA Drip Drain Set Instruction Manual

June 12, 2024
Jura

jura GIGA Drip Drain Set

jura-GIGA-Drip-Drain-Set-product

Product Information

The GIGA Drip Drain Set is a set of accessories designed for use with the GIGA coffee machine. It includes a drain hose and a valve. This set allows for the proper drainage of residual water from the coffee machine.

Product Usage Instructions

Installation

  1. Switch off the coffee machine and unplug it from the power socket.
  2. Remove the water tank and open the service cover on the back of the machine by pressing above the JURA logo.
  3. Push the red sliding catches completely to the rear to close the bean containers.
  4. Turn the blue locking devices outwards and remove both bean containers.
  5. Remove the drip tray and coffee grounds container.
  6. Lay the coffee machine carefully on its back.
  7. Slide the drain hose into the guide until it clicks.
  8. Set the coffee machine upright again.
  9. Fit the drip tray, water tank, and both bean containers.
  10. Turn the blue locking devices inwards and pull the red sliding catches completely to the front to open the bean containers again.
  11. Refit the service cover and fix it by pressing above the JURA logo until it clicks into place.
  12. Fill the bean containers with coffee beans and fit the aroma preservation covers.
  13. Plug the machine into the power socket and switch it on.

Product JURA Contact Details / Legal Information

If you require additional assistance or have legal inquiries, please contact JURA Elektroapparate AG:

Address: Kaffeeweltstrasse 10, CH-4626 Niederbuchsiten

Telephone: +41 (0)62 38 98 233

Email: [email protected]

For additional contact details specific to your country, please visit the JURA website at www.jura.com.

Copyright: The instructions for use are protected by copyright. It is not permitted to photocopy these instructions or translate them into another language without the prior written consent of JURA Elektroapparate AG.

Symbol description

Symbols used

  • Prompt to take action. This symbol means that you are being prompted to perform an action.
  • Information and tips

Supplied as standard

jura-GIGA-Drip-Drain-Set-fig
1

Tool required

  • Drill
  • 10 mm drill bit
  • File

Installation

  • Switch off coffee machine.
  • Unplug from the power socket.
  • Remove the water tank.
  • Open the service cover on the back of the machine by pressing above the JURA logo.
  • Push the red sliding catches completely to the rear to close the bean containers.
  • Turn the blue locking devices outwards.
  • Remove both bean containers.
  • Remove drip tray and coffee grounds container.
  • Carefully lay the coffee machine on its back.
  • Slide drain hose into guide until it clicks.
  • Drill hole for valve in drip tray (10 mm drill bit).
  • Deburr drilled hole with a file.
  • Insert valve (valve body and pressure spring from outside, red O-ring from inside).
  • Set coffee machine upright again.
  • Fit drip tray.
  • Fit water tank.
  • Fit both bean containers.
  • Turn the blue locking devices inwards.
  • Pull the red sliding catches completely to the front to open the bean containers again.
  • Refit the service cover and fix it by pressing above the JURA logo. It will click into place audibly.
  • Fill the bean containers with coffee beans and fit the aroma preservation covers.
  • Plug the machine into the power socket.
  • Switch on coffee machine.

JURA contact details / legal information

  • JURA Elektroapparate AG
  • Kaffeeweltstrasse 10
  • CH-4626 Niederbuchsiten
  • Tel. +41 (0)62 38 98 233
  • @ You will find additional contact details for your country at www.jura.com.

Copyright
The instructions for use contain information which is protected by copyright. It is not permitted to photocopy these instructions for use or translatethem into another language without the prior written consent of JURA Elektroapparate AG.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals