CRYSTORAMA 1135-PB-CL-MWP 12 Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
1135-PB-CL-MWP 12 Light Chandelier
Instruction Manual
1135-PB-CL-MWP 12 Light Chandelier
ASSEMBLY INSTRUCTION MODEL #1135-PB-CL-MWP
Crystal Sets
A. 64 Sets. (1)14mm+(1)AS9-2″
B. 6 Sets. (3)14mm+(1)Square+(3)14mm+AS9-3″
C. 12 Sets. (14)14mm
D. 6 Sets. (1)14mm+AS9-1.5″
E. 6 Sets. (1)Ring+(1)Square+(1)14mm+(1)AS9-3″
F. 1 Piece. (3)14mm+AS8-40mm Ball
G. 6 Sets. (24)14mm
WARNING:
All electrical components must be
installed by a licensed electrician in accordance with the National Electric
Code and the appropriate local electrical codes.
You will need 12- Candelabra Base Bulb 40 Watts recommended 60
Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is Damp rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
-
To install the 8″arms, slightly loosen each screw on the metal plate.
Pull a female plug through a hole in the upper metal plate.
Connect the male plug at the end of the upper arm with the female plug that was just pulled.
Push the end of the arm with the metal tab through the hole until stopped by the metal tab (this should also push the wires and plugs back inside the metal plate).
Twist the metal tab counter-clock wise until both inserts lock onto the loose screws.
Tighten the screw securing the arm in place.
Repeat for all 8″arms using every other hole. -
Repeat Step 1 for the 12″arms using the remaining holes.
-
Screw the Center column kit onto the distributor box.
-
Place the bottom bowl, metal washer, bobeche and metal washer in that order, over the distributor box. Secure with the finial.
-
Attach the mounting bar onto the outlet box.
-
Decide the desired hanging height and adjust the chain to the correct length.
-
Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with collar ring.
-
Dress the crystals as illustrated.
WARNING:This product can expose you to Lead, which is known to the State
of California to cause cancer and/or birth defects or reproductive harm.For
more information go to
www.p65warnings.ca.gov
Part Number
Part Numbers
A.(1)-Mounting hardware
Wire connector ×2.
Mounting bar x1.
Lock washer ×1.
Hex nut ×1.
Nipple ×1.
Screw ×2.
B. (1)-Canopy (W5″xH1″)-XSN1130PBCAN5IN
C. (1)-Collar Ring
D. (1)-Collar Loop-XSN1130PBLOOP
E. (1)-Chain (4mmx72″)-XSN1130PBCHA4MM
F. (1)-Center Column Kit Loop
G. (1)-Center Column Kit
Top Bowl ; Ø6″,12pin,13mm center hole.-XSN1135PBDIBOB12PN
Glass Vase; H6″
Top Bobeche ; Ø5″, 6pin,24mm center hole. -XSN1135PBBOB5IN
Glass Vase x2 ; H5″
Metal Cover ; H1.5″
H. (6)-8″ Arms with holder-XSN529GDARM8INKD
I. (13)-Bobeche; Ø4″, 4pin,24mm center hole.-XSN1135PBBOB4IN
J. (6)-12″ Arms with holder-XSN503GDARM12INKD
K. (12)-Male Plug
L. (1)-Distributor box with female plug ;
Ø5 1/2″ ; 11mm center hole.
M. (1)-Bottom bowl ; Ø6″, 6pin, 24mm center hole. -XSN1130PBDIBOB6IN
N. (2)-Metal washer
O. (1)-Finial-XSN1130PBFIN
P. (12)-PVC candle sleeve ; H4″
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>