Speakers SK600 Wireless Speaker User Guide

June 9, 2024
Speakers

Speakers SK600 Wireless Speaker User Guide **

.Speakers SK600 Wireless Speaker **

PACKING CONTENT

PACKING CONTENT

POWER ON

POWER ON ICON

BLUETOOTH CONNECTION

BLUETOOTH CONNECTION

BLUETOOTH CONNECTION

BLUETOOTH CONNECTION
BLUETOOTH CONNECTION

BLUETOOTH CONNECTION

Connected
Connected Device

Pairing

Paring Device

MODE SWITCH

MODE SWITCH

PLAY

PLAY

HANDS-FREE CALL

HANDS-FREE CALL

LIGHT

LIGHT

MIC

Mic

MICROPHONE

MicCrophone

MicCrophone

*The UHF connection is enabled by default when the speaker is turned on If you want to connect the second microphone ,please check the channel of the first one,if the channel of the first one s CHA,then switch the channel of the second microphone to CHB
MicCrophone
A/B Fequency band switch:

Press and hold the” “button at the same time under the power-off status,it will display  CHB or CHA and power on in 3 seconds.

CHARGE

CHARGE

FAQ

Problems How to solve
When the Signal of the microphone is not good or is stuck Short press

“+””-”to select the appropriate frequency band from CH01-CH10.
When the microphone cannot be connected to the host| Press and hold the“”and“-”simultaneously in the power-on state, then “DE” will be displayed on the screen ,it will restore to the default settings and reconnect.
If the microphone cannot be turned on| please plug in the charging cable to charge and activate;
How to pair with a new microphone?| While the speaker in power off state, microphone in power on state ,press and hold the “”and “+” button of the microphone simultaneously, the screen will display the “ID“ and enter the ID paring status.|
At this time,the speaker can be automatically paired with the ID when it is turned on.(After the connection is successful, the speaker will have a beep).
How to clear the ID of the microphone?| Microphone: Press he “”and“-” simultaneously in the power on state ,the “DE”will be displayed on the screen,it will restore to non IDstatus.
Note: If the microphone has cleared its ID and needs to be connected to the speaker again ,re-pair the ID according to the method of the new microphone.

TechnicalSpecification

  • Speaker :2×3 inch full-range speaker
  • PassiveRadiators: 90mmx 2pcs
  • SNR : >89dB
  • Batterytype: Lithium battery (3.7V4500mAh)×2
  • Charginginterface: USBType-C
  • Chargingtimeofbattery: Approx. 4.5hours (5V/3A)
  • Musicplayingtime: Approx. 13hours (depending on volume and audio content, with dynamic lightoff )
  • Bluetoothversion: 5.0
  • Hands-freecall: Yes
  • Playableformat: MP3、WMA、WAV、FLAC APE(MicroSDCard/Udisk)
  • Dynamiclight : RGBambient lighting
  • Amplifierfunction: Support wireless micropone amplification function
  • Dimensionofproduct: W307mmH150.5mmD140mm/W12.08″xH5. 2″xD5.51″
  • Weightofproduct: 2280g

suport : 0755-61181399

www.hb2099.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Speakers User Manuals

Related Manuals