jura Coffee Grounds Disposal Drip Drain Set X Line Instruction Manual
- June 12, 2024
- Jura
Table of Contents
jura Coffee Grounds Disposal Drip Drain Set X Line
Product Usage Instructions
Supplied as standard
- Tube section
- Coffee grounds funnel
- Drain hose
- Valve
Tools required
- Drill
- File
- In addition for coffee grounds disposal function:
- 60 mm core drill bit
- 70 mm core drill bit
- In addition for drip drain:
- 10 mm drill bit
- Core drill bit of at least 35 mm
Installation
Preparation
- Switch off the coffee machine.
- Unplug from the power socket.
- Remove the water tank
- Lock the aroma preservation cover of the bean container.
- Remove drip tray and coffee grounds container.
Coffee grounds disposal function
- Drill a hole in the underside of the drip tray using a 60 mm core drill bit.
- Drill a hole for coffee grounds disposal in the tabletop using a 70 mm core drill bit. Refer to the illustration on the last page of the instructions for use for the position.
- Carefully lay the coffee machine on its back.
- Remove the round cover.
- Insert the tube section and tighten it.
- Place the coffee machine and tube section in the tabletop hole and/or install the drip drain. (See the following section)
- Insert tube section and tighten.
- Place coffee machine and tube section in tabletop hole and/or install drip drain (see following section).
Drip drain
- Drill a hole for the valve in the drip tray using a 10 mm drill bit.
- Deburr the drilled hole with a file.
- Fit the coffee grounds funnel in the drip tray.
- Deburr the drilled hole with a file.
- Insert the valve (valve body and pressure spring from outside, red O-ring from inside).
- Insert the drain hose into the guide until it clicks.
- Set the coffee machine upright again.
- Guide the drain hose through the hole in the tabletop.
Final jobs
- Fit the drip tray.
- Fit the water tank.
- Plug the machine into the power socket.
- Switch on the coffee machine.
Figure: Position of tube section for coffee grounds disposal (2) and drain hose (1) on bottom of machine (minimum distance (A) of hole from machine: 40 mm).
JURA contact details
JURA Elektroapparate AG
Kaffeeweltstrasse 10
CH-4626 Niederbuchsiten
Tel. +41 (0)62 38 98 233
www.jura.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>