CRYSTORAMA 9226-OS 6 Light Sphere Chandelier

Product Information

• Model: 9226-OS
• Brand: Crystorama
• Canopy Dimensions: Width 7 inches, Height 0.8 inches
• Product Rating: Damp Rated
• Number of Bulbs: 6
• Bulb Type: Candelabra Base
• Recommended Bulb Wattage: 40 Watts
• Maximum Bulb Wattage: 60 Watts
• LED Bulbs can be used for extended use

Product Usage Instructions

1. Before starting installation, carefully inventory all parts and components to ensure everything is included.
2. Install 6 Candelabra Base Bulbs (not included) into the fixture.
3. Attach the mounting plate onto the outlet box using the outlet box screws.
4. Take the end of the rod with a hook and attach it to the top of the fixture frame. Open a quick link and attach it to the other end of the rod (the end with a closed loop).
5. Thread the collar ring into the canopy.
6. Open the other quick link and attach it to the collar loop.
7. Connect the fixture wires into the outlet box.
8. Raise the canopy onto the collar loop and secure it with the collar ring.
9. Attach the crystal ball A on the bottom of the fixture.
10. After securely attaching the fixture into the outlet box, proceed to connect the power.

Parts List:

XRE9226OSCAN7IN

C| Collar Ring
D| Collar Loop
E| Quick Link (2 pieces)
F| Hanging Chain (72.4mm) #XRE9220OSCHA4MM
G| Rod (8.9mm) #XRE9224OSROD8IN
H| Swivel
I| Center Stem (14.69, 9.3mm) #XRE9226OSSTEM14.69IN
J| Final #XRE9224OSFIN
K| Candle Sleeve (Width 0.87 inches, Height 1.97 inches)

XRE9224OSCDL1.97IN (6 pieces)

WARNING:

• Electrical Danger
• Turn Power Off

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. You will need 6 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DAMP-RATED.

How to Install

1. Do a complete inventory of all parts and components before you start the installation.
2. Install bulbs (not included).
3. Install the mounting plate onto the outlet box and secure it with the outlet box screws.
4. Take the end of the rod with a hook and attach it to the top of the fixture frame. Open a quick link and attach it to the other end of the rod (the end with a closed loop).
5. Thread the collar ring into the canopy.
6. Open the other quick link and attach it to the collar loop.
7. Connect fixture wires to the outlet box.
8. Raise the canopy onto the collar loop and secure it with the collar ring.
9. Attach the crystal ball “A” on the bottom of the fixture.
10. After safely attaching the fixture to the outlet box, proceed to connect the power.

Part Number

• A. (1) – Mounting Hardware
• B. (1) – Canopy(W7”, H0.8”) #XRE9226OSCAN7IN
• C. (1) – Collar Ring
• D. (1) – Collar Loop
• E. (2) – Quick Link
• F. (1) – Hanging Chain(72″,4mm) #XRE9220OSCHA4MM
• G. (1) – Rod(8″,9.3mm) #XRE9224OSROD8IN
• H. (1) – Swivel
• I. (1) – Center Stem(14.69″,9.3mm) #XRE9226OSSTEM14.69IN
• J. (1) – Final #XRE9224OSFIN
• H. (6) – Candle Sleeve(W0.87″,H1.97″) #XRE9224OSCDL1.97IN

WARNING:
This product can expose you to Lead. which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.

Crystorama.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>