CRYSTORAMA NX40610 Solaris Six Light Chandelier Instruction Manual

ASSEMBLY INSTRUCTION
MODEL # 9228-BK

Crystorama.com

NX40610 Solaris Six Light Chandelier

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need 6 -Candelabra Base Bulb 40 Watts Recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DAMP RATED

How to Install

1. Do a complete inventory of all parts and components before you start installation.
2. Install bulbs (not included).
3. Install the mounting plate onto outlet box and secure it with the outlet box screws.
4. Take the end of the rod with a hook and attach it to the top of the fixture frame. Open a quick link and attach it to the other end of the rod (the end with a closed loop).
5. Thread the collar ring into the canopy.
6. Open the other quick link and attach it to the collar loop.
7. Connect fixture wires into the outlet box.
8. Raise the canopy onto the collar loop and secure it with the collar ring.
9. Attach the crystal ball “A” on the bottom of fixture.
10. After safely attaching fixture into outlet box, proceed to connecting the power.

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.

PART NUMBER

Part Number
A.(1) – Mounting Hardware
B.(1) – Canopy(W7”, H0.8”) #XRE9226BKCAN7IN
C.(1) – Collar Ring
D.(1) – Collar Loop
E.(2) – Quick Link
F.(1) – Hanging Chain(72″,4mm) #XRE9220BKCHA4MM
G.(1) – Rod(15″,9.3mm) #XRE9228BKROD15IN
H.(1) – Swivel
I.(1) – Center Stem(19.41″,9.3mm) #XRE9228BKSTEM19.41IN
J.(1) – Final #XRE9224BKFIN
H.(6) – Candle Sleeve(W0.87″,H1.97″) #XRE9224BKCDL1.97IN

References

• Crystorama Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>