CRYSTORAMA 9228-EB Solaris Six Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
9228-EB Solaris Six Light Chandelier
Instruction Manual
ASSEMBLY INSTRUCTION MODEL # 9228-EB
9228-EB Solaris Six Light Chandelier
WARNING:
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes. You will need 6 -Candelabra Base Bulb 40 Watts Recommended
60 Watts Max.
USE LED BULBS FOR EXTENDED USE THIS FIXTURE IS DAMP RATED
How to Install
- Do a complete inventory of all parts and components before you start installation.
- Install bulbs (not included).
- Install the mounting plate onto outlet box and secure it with the outlet box screws.
- Take the end of the rod with a hook and attach it to the top of the fixture frame. Open a quick link and attach it to the other end of the rod (the end with a closed loop).
- Thread the collar ring into the canopy.
- Open the other quick link and attach it to the collar loop.
- .Connect fixture wires into the outlet box.
- Raise the canopy onto the collar loop and secure it with the collar ring.
- Attach the crystal ball “A” on the bottom of fixture.
- After safely attaching fixture into outlet box, proceed to connecting the power.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Wamings.ca.gov.
PART NUMBER MODEL # 9228-EB
PART NUMBER
A.(1) – Mounting Hardware
B.(1) – Canopy(W7”, H0.8”) #XRE9226EBCAN7IN
C.(1) – Collar Ring
D.(1) – Collar Loop
E.(2) – Quick Link
F.(1) – Hanging Chain(72″,4mm) #XRE9220EBCHA4MM
G.(1) – Rod(15″,9.3mm) #XRE9228EBROD15IN
H.(1) – Swivel
I.(1) – Center Stem(19.41″,9.3mm) #XRE9228EBSTEM19.41IN
J.(1) – Final #XRE9224EBFIN
H.(6) – Candle Sleeve(W0.87″,H1.97″) #XRE9224EBCDL1.97IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>