westfalia 861611 Hand Push Sweeper Instruction Manual

westfalia 861611 Hand Push Sweeper

Product Information

The product is a manual push sweeper with a capacity of 14 liters. It has a working width of 70 cm and weighs 8.9 kg. The dimensions of the product are 65x60x21 cm.

Product Usage Instructions

1. Before first use, open the packaging and carefully remove the appliance. Make sure to keep the packaging material out of reach of children.
2. Inspect the equipment and accessories for any transport damage.
3. Ensure that all items are supplied.
4. Mount the feed-in brushes (4) to the locating plates at the bottom of the device using 3 screws (12) each.
5. Insert the push bar mounts (8) and (9) into the corresponding receiving slots (fig. 4).
6. Secure the push bar mounts (8) and (9) with the screws (11).
7. Tighten the adjustment nuts (2) for the push bar using the plastic rings (13).
8. Secure the push bar bottom (7) to the push bar mounts (8) and (9) using assembly screws (10).
9. Ensure that the feed-in brushes are at the desired height by adjusting the setting screw (5).
10. Attach the debris collector (6) to the push bar bottom (7).
11. The product is now ready for operation.

Dear Customers

Instruction manuals provide valuable hints for using your new device. They enable you using all functions, and they help you avoiding misunderstandings and preventing damage. Please take the time to read this manual carefully and keep it for future reference.

Overview

1. Push Bar

2. 2x Adjustment Nut for Push Bar

3. 2x Fastening Nut for Push Bar

4. 2x Feed-in Brush

5. Setting Screw for Adjusting the

6. Height of the Feed-in Brushes

7. Debris Collector

8. Push Bar Bottom
   Push Bar Mount left

9. Push Bar Mount right

10. 2x Assembly Screw for Push Bar

11. 2x Fixing Screw for Push Bar Extension

12. 6x Fixing Screw for Feed-in Brushes

13. 2x Plastic Ring for Adjusting Nut

Safety Notes

Please note the following safety notes to avoid malfunctions, damage or physical injury:

• Persons with limited physical, sensorial or mental abilities are not allowed to use the unit, unless they are supervised and briefed for their safety by a qualified person.
• Keep the unit out of reach of children or persons in need of supervision. The sweeping machine is not a toy.
• Only use the sweeping machine in the way indicated in these instructions. The unit is not designed for continuous, pro- fessional use.A
• The sweeping up of gel-like, liquid, combustible or explosive substances is not permitted. Do not use the mechanical sweeper to sweep up glowing or harmful objects.
• Do not put your hands or feet close to or under rotating parts.
• Hold the unit tightly during operation.
• Do not expose the unit to rain or snow.
• Please take care that the brushes do not jam during operation. A long-term jam can damage the machine.
• Immediately replace defective parts. Use only original replacement parts.
• Should the unit become damaged do not use it and have it repaired by a professional or contact our customer support department. Do not disassemble the unit or try repairing it yourself.

Assembly

Technical Data

• Working Width : 70 cm
• Collector Volume : 14 l
• Size : 65x60x21 cm
• Weight : 8.9 kg

Operation

Before first Use

• Open the packaging and carefully take out the appliance.
• Remove the device from the packaging. Keep packaging material out of reach of children. There is a risk of suffocation!
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport damage.

Intended Use

• The mechanical sweeper is intended for sweeping level and dry areas such as entrance drives, terraces, yards, etc.
• The appliance may only be used for its intended use. Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this.
• Please note that our equipment has not been designed for use in commercial, trade or industrial applications.
• Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for equivalent purposes.

Note : You will find the feed-in brushes and the assembly material inside the debris collector.

1. Mount the feed-in brushes (4) with 3 screws (12) each to the locating plates at the bottom of the device.
2. Insert the push bar mounts (8) and (9) into the corresponding receiving slots (fig. 4). Secure the push bar mounts (8) and (9) with the screws (11).
3. Put the bottom section of the push bar (7) onto the push bar mounts (8) and (9) and secure with the two adjustment nuts (3) and the washers.
4. Slide the top section of the push bar (1) onto the bottom section of the push bar (7) and secure with two adjustment nuts (2), two assembly screws (10) and the plastic rings (13).

When the mechanical sweeper is pushed, the feed-in brushes (4) and the pick-up brushes (B) are set in rotation by the belt drives (A).
The rotating feed-in brushes (4) sweep the dirt to the centre. The two counter-rotating pick-up brushes (B) convey the dirt into the debris collector (6).
Adjusting the Feed-in Brushes (Fig. 8)
Use the setting screw (5) to steplessly adjust the height of the feed-in brushes (4) as required. Turn the setting screw clockwise to increase the distance to the ground. Turn the setting screw counter clockwise to decrease the distance to the ground.

Emptying the Debris Collector (Fig. 9)

Lift the full debris collector (6) upward from the appliance and dispose of the collected dirt properly.
After sweeping up metal, glass or sharp objects, wear heavy-duty work gloves when emptying the debris collector.

Height Adjustment and folding of the Push Bar (Fig. 10/11)

• Remove the two adjustment nuts (2) and the corresponding screws. Select one of the three holes (C) as required, and then re-tighten the nuts (2) and the corresponding screws. The push bar can be set to three different heights over a range of approx. 98 – 94 – 89 cm.
• Slightly untighten both fastening nuts (3) by approx. one turn and pull up the push bar in order to fold it. This way the appliance can be transported or stored space-savingly.

Cleaning and Storing

• Clean the sweeper with a lightly moistened cloth. Do not immerse the unit into liquids. Do not use aggressive chemicals, solvents or abrasives.
• Remove debris such as leaves, twigs, etc. from the brushes.
• Regularly check the drive belts for proper tightness and elasticity.
• Store the sweeper indoors in a dry place that is protected from dust, dirt and extreme temperatures.

Disposal

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled.
Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.

Customer Services

Deutschland
Westfalia Werkzeugstraße 1 D-58093 Hagen
Telefon : (0180) 5 30 31 32
Telefax : (0180) 5 30 31 30
Internet : www.westfalia.de

Österreich
Westfalia Moosham 31 A-4943 Geinberg OÖ
Telefon : (07723) 4 27 59 54
Telefax : (07723) 4 27 59 23
Internet: www.westfalia-versand.at

Schweiz
Westfalia Wydenhof 3a CH-3422 Kirchberg (BE)
Telefon : (034) 4 13 80 00
Telefax : (034) 4 13 80 01
Internet : www.westfalia-versand.ch

Gestaltung urheberrechtlich geschützt
© Westfalia 05/23

References

• Westfalia Versand Österreich | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Schweiz | Werkzeug ✓ Garten ✓ Technik ✓ & mehr
• Westfalia Versand Deutschland | Werkzeug ✓ Garten ✓ Technik ✓ & mehr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>