NEXIGO PS5 Stand with RGB LED Light User Manual
- June 9, 2024
- NEXIGO
Table of Contents
NEXIGO PS5 Stand with RGB LED Light User Manual
Welcome to the NexiGo Family!
Thank you for choosing the NexiGo Multifunctional Cooling Stand for the P-5!
You are now part of an exclusive club: the NexiGo family! It’s our job to make
sure you enjoy your membership. If you have any problems please contact us at
cs@nexigo.com at any time for further assistance. This
product is covered by our industry leading 1-year manufacturers warranty.
Please visit www.nexigo.com/warranty-information for warranty terms and conditions. Make sure to
register your purchase at
www.nexigo.com/warranty for a FREE
additional 1-year warranty!
From all of us here at NexiGo, we want to welcome you again to the family. We thank you deeply for your trust and for your business. We know you’ll love it here. We look forward to serving you again in the near future.
Yours Sincerely, The NexiGo Team.
Contact Information
- Brand: NexiGo
- Website: www.nexigo.com
- Manufacturer: Nexight INC
- Email: cs@nexigo.com
- Tel: +1(458) 215-6088
Product Introduction
The NexiGo Multifunctional Cooling Stand for the P-5 console is designed to help reduce the operating temperature of the console as well as to provide you with a more convenient and comfortable gaming experience. This unit features RGB strip lights on both sides of the cooling stand. There are several light modes you can switch between to highlight your unit and your accessories. Additionally, the stand also includes two controller charging docks to charge original P-5 controllers. Each charging dock has a battery charging icon indicator that will show the current controller’s charging status. While the controller is charging, the battery icon indicator will light up dynamically from bottom to top showing the controller is charging. When the controller is fully charged, the battery indicator will be fully lit and will no longer show charging status. The built-in fans help improve cooling performance, prolonging the console’s lifespan. The cooling stand has four different fan settings for maximum cooling potential: high, medium, low, and off. On the opposite side of the dock ten storage spaces are built into the stand for game cases to be stored in a neat and orderly fashion.
Next to this game case storage space are two openings designed for you to place your remote as well as an external hard drive. Finally, the P-5 console can be directly connected to the stand with the provided screw, increasing stability and protecting it from scuffs or damage. Compatible with CFI 1000A and CFI-1000B P-5 consoles.
Product Overview
Function Description
- Cooling fan: Twin high-speed fans enhance the cooling system of the P-5 to gently pull additional air through the console.
- Fan speed switch: Used to adjust fan speed, switch between the different speeds quickly and easily. As you switch between the different fan speeds the fan lights will also brighten indicating the current speed.
- Battery charging indicator: Each charging dock has a battery charging indicator that will show the current controller charging status. While the controller is charging. the battery icon indicator will light up dynamically from bottom to top showing the controller is charging. When the controller is fully charged, the battery indicator will be fully lit and will no longer show charging status.
- LED strip light: Press the light mode switch to change the light mode amongcolorful flowing light mode, colorful breathing light mode, and steady blue light mode. When the unit is powered on and there is no controller on the charging bays, the LED strip lights will display a colorful flowing light patterr by default. While the controller is charging, the LED strip lights will display an orange breathing light to indicate the controller is charging and will turn to a steady blue light after two charging controllers are fully charged.
Note: To maximize the lifespan of the P-5 controllers please do not remove the controllers while they are being charged. When the battery level of the controller reaches 80% or above, if you disconnect the controller from the charger and attempt to reconnect it again it will not be ab leto continue charging due to the battery protection features of the P-5 controller. The controller will continue to charge only after the battery level falls below 80%.
Installation Guide
-
Step 1: Remove the screw from the package.
-
Step 2: Attach the console onto the NexiGo Multifunctional Cooling Stand using the screw.
-
Step 3: Insert the USB Type-C connector for the power cable into the stand at the rear and plug the power adapter into a power source.
-
Step 4: Clean the surface of the P-5 console where you would like to place the headphone holder.
-
Step 5: Attach the headphone holder to the P-5 console. Make sure to press firmly to ensure the headphone holder is securely attached.
-
Step 6: The NexiGo Multifunctional Cooling Stand is now ready for use!
Specifications
-
Type-C Power Input: 5V/3A (directly powered by the included 5V/3A power adapter).
-
Controller Charging Port Output Voltage: DC 5V±0.1V.
-
Controller Charging Port Output Current:51000mA at each charging port.
-
USB Output Port Voltage: DC 5V±0.1V.
-
USB Output Port Total Current: 5 800mA.
Note: It is not recommended to plug an item requiring greater than 800mA current load in the USB ports. -
Number of Fans: 2 •
-
Charging Time: Fully charges two controllers simultaneously in approximately 3.5 hours.
-
Product Size:10.08 x 8.54 x 2.24 inches
-
Product Material: ABS • Fan Speeds:
- High Speed: 4000±800 rev/min,
- Medium Speed: 3500±700 rev/min,
- Low Speed: 3000±600 rev/min.
Package Includes
- 1 x Multifunctional Cooling Stand for the P-5
- 1 x P-5 Connecting Screw
- 1 x 5V/3A Power Adapter with USB Type-C Charging Cable
- 1 x Headphone Holder Attachment
- 1 x User Manual
Notes
- Only use the provided 5V/3A power adapter to power the unit. Using any other power adapter or cable may cause damage to the product.
- When this unit is not in use or when docked controllers are fully charged, it is recommended that you unplug it from the power source.
- Ensure that this product has enough ventilation for general use, otherwise the additional airflow provided by the base will be insufficient.
- Only use on a flat, horizontal surface.
- DO NOT stick foreign objects into any of the openings on this unit. You may damage the unit or cause harm to yourself
- Please use a lint-free dry cloth to clean the product. Do not clean the product with water or alcohol. Ensure the unit is unplugged before cleaning.
- This product cannot be used and/or stored in high humidity conditions.
- To ensure longevity and lifespan of the unit, protect it from dust and do not place other consoles or objects on it
- If the fan is inoperable but does not show signs of damage, please exercise the warranty or dispose of the item.
- If the fan is damaged, please exercise the warranty or dispose of the item. DO NOT attempt to open and repair it independently.
- Keep this product dry.
- Keep away from small children due to potential shock and cutting hazards.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>