OOBEST TX223C 10W Wireless Charging Table Lamp Instruction Manual
- June 11, 2024
- OOBEST
Table of Contents
OOBEST TX223C 10W Wireless Charging Table Lamp Instruction Manual
Thank you for choosing our products. To ensure that you can fully understand, install and use this product, you must carefully read the instructions. After reading, please keep it properly for future reference.
Product accessories
Product Information
Instructions
-
It is white. When the power indicator lamp is powered on, the power indicator lamp will turn blue, indicating that the lamp is turned on
-
Adjust the brightness of the main light source by sliding the blue progress bar to adjust the required brightness scene, and the indicator light will change with the brightness change.
-
Touch the key to adjust the color temperature of the light.
There are five segments of color temperature cycle switching.
The five segments of color temperature are: 3000k-3500-4200k-5000k-6000k, Long press to turn the backlight of the display on or off. -
The red indicator light will be on after touch, indicating that the 45 minute timing function has been turned on and can be turned off by touching again. The use of the timing function will not affect the use of other functions. After the 45 minute countdown, the main light source will automatically turn off the light
-
Touch the button to turn on the small night light function. The product is designed with two night lights. The first touch is a triangular luminous body at the end of the lamp head, and the second is a hidden luminous body at the base.
- When using, touch the first time to turn on both night lights at the same time,
- Touch the second time to turn off the lamp cap night light, and the base night light will not turn off,
- The third touch will turn off the base night light and turn on the lamp cap night light,
- Touch to turn off all night lights for the fourth time,
Wireless charging function
USB Charging function
Display screen and functions
Back setting and battery compartment
Clock and date settings
- Press to switch between clock mode and alarm mode
- In clock mode (displayed in the upper left corner ) Press to enter the time setting mode. Press to adjust the time, and then press to enter the next option. The setting sequence is hour minute year month day
Alarm and snooze function settings
-
In the alarm mode ( is displayed in the upper left corner), press the key to start the setting, press the key to set the clock time, and then press the key to confirm and set the setting as follows: Time Sleeping – Ringing Tone – Save and Exit.
-
In the snooze mode ( flashing in the upper right corner), press the key to set the time for the alarm to ring again.
After that, press the key to save and start setting the alarm tone.
Press the key to select the ring tone. After that, press the key to save and exit. -
In clock mode, press key to switch between 12 hour or 24 hour clock. Press the key to switch between Celsius and Fahrenheit
-
In the alarm mode, press the key to turn on or off the alarm and snooze modes.
Simultaneous rotation of five axes
Five axis linkage can fold out a variety of lighting angles, and the
lighting angles are more extensive
The lamp cap supports 180 ° left and right rotation, and the lamp arm folds up
and down 180 °, The lamp arm rotates 180 ° left and right, the lamp post folds
180 °, and the lamp post rotates 180 ° (the following are just a few of them,
and more angles can be tried by yourself)
⚠ be careful Do not rotate the angle of the lamp excessively to avoid damage
Matters needing attention
- Do not disassemble the product by yourself to avoid electric shock.
- Please use the special transformer and power socket specified by the manufacturer to maintain the normal operation of the product.
- Please do not place the product on an unstable desktop during use to prevent the product from falling and being damaged.
- Do not over adjust the movable joint of the product to avoid damage to the movable joint of the lamp.
- Do not place the product in a place with high temperature or high humidity. To avoid eye injury
- Please do not look directly at the LED bulb light source.
- In case of the following conditions, please unplug the power cord and stop using
- The power cord or power plug is damaged or damaged.
- This lamp holder is affected with damp or rain.
- When the shell and movable joint of the lamp holder are damaged,
- safety factors such as smoke and sparks may occur to the lamp holder.
If you have any questions, please ask the customer service personnel
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
RF warning for WPT device:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of device a distance of 15cm
surrounding the device and 20 cm above the top surface of the device must be
respected.