avalue EPM-1502 eDP to VGA Converter Installation Guide

: June 12, 2024
: avalue

Table of Contents

avalue EPM-1502 eDP to VGA Converter
Product Information
Product Usage Instructions
FCC Statement
A Message to the Customer
Getting Started
Packing List
Product Specifications
Hardware Configuration
Mechanical Drawing
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

avalue EPM-1502 eDP to VGA Converter

avalue-EPM-1502-eDP-to-VGA-Converter-PRODUCT

Product Information

Product Name: EPM-1502 eDP to VGA converter
Part Number: E2047BS0200R
Manufacturer: Avalue
FCC Statement: This product complies with FCC regulations.

Product Usage Instructions

Getting Started

Safety Precautions

Warning! Always disconnect the power cord from your chassis before working with the hardware. Do not make connections while the power is on to avoid damaging sensitive electronic components. Only experienced electronics personnel should open the PC chassis.
Caution! To prevent damage to the CPU card, ground yourself to remove any static charge before touching it. Use a grounding wrist strap at all times and place electronic components in a static-dissipative surface or static-shielded bag when not in the chassis. Do not remove the heatsink without proper instructions, and contact us for support if necessary.

Packing List

Before installing the single board, ensure that the following materials have been shipped:

1 x EPM-1502 eDP to VGA converter

Product Specifications

The EPM-1502 eDP to VGA converter features the following specifications:

I/O Chip: Chrontel CH7517A-BFI
Form factor: Customized

Please consult the user’s manual for more detailed information and for any technical difficulties you may encounter. You can also visit Avalue’s website at http://www.avalue.com.tw/ to access the latest version of the user’s manual.

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS “A” DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

A Message to the Customer

Avalue Customer Services

Each and every Avalue’s product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Avalue device is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To ensure you get the full benefit of our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into technical difficulties, we are here to help. For the most frequently asked questions, you can easily find answers in your product documentation. These answers are normally a lot more detailed than the ones we can give over the phone. So please consult the user’s manual first.
To receive the latest version of the user’s manual; please visit our Web site at: http://www.avalue.com.tw/

Getting Started

Safety Precautions

Warning!
Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static dissipative surface or static-shielded bag when they are not in the chassis

Always note that improper disassembling action could cause damage to the motherboard. We suggest not removing the heatsink without correct instructions in any circumstance. If you really have to do this, please contact us for further support.

Packing List

Before you begin installing your single board, please make sure that the following materials have been shipped:

1 x EPM-1502 eDP to VGA converter

Product Specifications

Component

I/O Chip| Chrontel CH7517A-BFI
Form factor| Customizes
Input I/F| W-B 40Px1 0.5mm 90D(F)
Output I/F| DB-15 VGA connector
Display
Spec. &

Resolution

| ****

1920×1200@60Hz with reduced blanking

Multiple Display| Depend on the Intel platform
Mechanical & Environmental
Operating Temp.| CH7517A–BF 0~60°C (32~140°F)

CH7517A-BFI -40~85℃ (-40~185°F)

Storage Temp.| -40°C ~ +75°C (-40 ~167°F)
Operating

Humidity

| 40℃@95% relative humidity, non-condensing
Power| From main board eDP connector
Size (L x W)| 50mm50mm10.55mm
Weight| 11g