Avalue EPC-BYT2 Intel Celeron SoC Processor Fanless Box PC User Guide

May 15, 2024
avalue

Avalue-logo

Avalue EPC-BYT2 Intel Celeron SoC Processor Fanless Box PC

Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-
product

Product Information

Specifications

  • Model: EPC-BYT2
  • Copyright: © 2023 Avalue Technology Inc., ALL RIGHTS RESERVED
  • Part No.: E2017CA91A3R
  • Designed for industrial environments
  • Reliable performance
  • Ease of operation

Frequently Asked Questions

  • Q: Where can I find the latest version of the user’s manual?
  • Q: What should I do if I encounter technical difficulties?
    • A: If you encounter technical difficulties, refer to the user’s manual for detailed troubleshooting steps. You can also contact our technical support team for assistance.

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

  1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
  2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS “A” DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

A Message to the Customer

Avalue Customer Services

Each and every Avalue’s product is built to the most exacting specifications to ensure reliable performance in the harsh and demanding conditions typical of industrial environments. Whether your new Avalue device is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To ensure you get the full benefit of our services, please follow the instructions below carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into technical difficulties, we are here to help. For the most frequently asked questions, you can easily find answers in your product documentation. These answers are normally a lot more detailed than the ones we can give over the phone. So please consult the user’s manual first.

To receive the latest version of the user’s manual; please visit our Web site at: http://www.avalue.com.tw/

Getting Started

Safety Precautions

Warning!

Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.

Caution!

Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components in a static-dissipative surface or static-shielded bag when they are not in the chassis.

Packing List And Specifications

Packing List

  • 1 x EPC-BYT2 Intel® Celeron® SoC Processor Fanless Box PC
  • Other major components include the followings:
    • Screw kit
    • Adapter

Note

  • If any of the above items is damaged or missing, contact your retailer.

System Specifications

System

Board| ECM-BYT2
CPU| Intel® Celeron® Processor J1900 Family
BIOS| AMI uEFI BIOS, 64Mbit SPI Flash ROM
System Chipset| Valleyview D SoC Integrated
I/O Chipset| EC ITE IT8528E
System Memory| One 204-pin SODIMM Socket Up to 8GB DDR3L 1333MHz SDRAM
Watchdog Timer| H/W Reset, 1sec. ~ 65535sec./1sec.step
H/W Status Monitor| Monitoring System Temperature, Voltage with Auto Throttling Control
Storage
Solid State Drive| 1 x mSATA

1 x 2.5” Drive Bay

External I/O
COM Port| 1 x RS-232
USB Port| 4 x USB (1 x USB 3.0, 3 x USB 2.0)
Video Port| 1 x VGA, 1 X HDMI
LAN Port| 2 x RJ45
Switch| 1 x Power on/off membrane w/ LED
Indicator Light| 1 x Power on/off LED on rear side

1 x Storage LED on rear side

Antenna| 2 x Antenna mounting
Expansion Slots| 1 x Full Size Mini PCIe (mSATA supported)

1 x Half Size Mini PCIe

Display
Chipset| Intel® Celeron® SoC Integrated Graphics
Multiple Display| Dual Display, VGA + HDMI
Resolution| VGA Mode: 2560 x 1600 @ 60Hz

HDMI Mode: 1920 x 1200 @ 60Hz

Ethernet
Chipset| 2 x Realtek RTL8111E Gigabit Ethernet
Ethernet Interface| 10/100/1000 Base-Tx Gigabit Ethernet Compatible
Mechanical
Power Type| +12 ~ 26Vdc (Lockable DC Jack)
ACPI| Single Power ATX Support S0, S3, S4, S5

ACPI 3.0 Compliant

Power Mode AT/ATX (ATX is the default setting)
Operating Temperature -10 ~ +45°C (w/mSATA & SSD), Ambient w/Air

Flow

0 ~ 40°C (32 ~ 104°F) (w/HDD), Ambient w/Air Flow

Storage Temperature| -20°C ~ 60°C (-4°F ~ 140°F)
Relative Humidity| 0% ~ 90% Relative Humidity, Non-condensing
Vibration Protection| With CF/SSD: 1.5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 30min/axis
Shock Protection| With CF/SSD: 10G, IEC 60068-2-27, Half Sine,11ms
Certification| CE, FCC Class A
Dimension (W x D x H)| 175mm x 110mm x 40mm
Color| Black
Fanless| YES

Note: Specifications are subject to change without notice.

System Overview

Front View

Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-
fig-1

Connectors

Connectors

Label| Function| Note
POWER| Power on button|

Rear View

Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-
fig-2

Connectors

Connectors

Label| Function| Note
COM1| Serial port 1 connector| D-sub 9-pin, male
HDD| HDD indicator|
LAN1/2| RJ-45 Ethernet 1/2 with (L)LED for ACT/LINK and (R)LED for speed
PWR| System power indicator|
USB2.0| USB 2.0 connector x 3|
USB3.0| USB 3.0 connector|
VGA| VGA connector| DB-15 female connector
HDMI| HDMI connector|
DC-IN| DC Power-in connector|

System Dimensions

Front & Top View

Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-
fig-3 Avalue-EPC-BYT2-Intel-
Celeron-SoC-Processor-Fanless-Box-PC-fig-4

Hardware Configuration

For advanced information, please refer to:

  1. ECM-BYT2 User’s Manual

Note

EPC-BYT2 connector mapping

Serial Port 1 connector (COM1)

Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-
fig-5

Signal PIN PIN Signal
NDCD# 1 6 NDSR#
NRXD 2 7 NRTS#
NTXD 3 8 NCTS#
NDTR# 4 9 NRI#
GND 5

VGA connector (VGA)

Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-
fig-7

PIN Signal PIN Signal PIN Signal
1 R 6 GND 11 NC
2 G 7 GND 12 DATA
3 B 8 GND 13 HSYNC
4 NC 9 +5V 14 VSYNC
5 GND 10 GND 15 CLK

Installing Hard Disk & Memory (EPC-BYT2)

  • Step 1: Fix HDD using the 4 screws in the Accessory Kit.Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-fig-10
  • Step 2:  Properly install the memory module and press until properly seated.

Installing Mounting Bracket (EPC-BYT2)

Avalue-EPC-BYT2-Intel-Celeron-SoC-Processor-Fanless-Box-PC-
fig-12

  • Step 1:  Insert and fasten 4 screws on each side of the system to secure Mounting bracket.

Copyright Notice

Copyright 2023 Avalue Technology Inc., ALL RIGHTS RESERVED.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals