POWRUI AHR-087 Surge Protector, USB Wall Charger Instruction Manual
- June 5, 2024
- POWRUI
Table of Contents
POWRUI AHR-087 Surge Protector, USB Wall Charger
Model: AHR-087
Parameters
- Model: AHR-087
- Power: 125VAC,60Hz
- Load Current: 15A,1875W
- WiFi Standard: 2.4G 802.11 b/g/n
- Applicable Voltage Range:100-240VAC
3 AC outlets built-in 540 joules of surge protection
Part 1:
Download the app
Search APP “Smart Life” from App store or Google Play, download and install
the APP onto your smart devices.
Part 2
Sign up/Log in/ Retrieve password
Sign Up
- Click “create new account” to enter the User Agreement and Privacy Policy page, and click” agree”, to get to the registration page.
- The system detects the current country/place automatically. You can also select the country/place manually.
- Input your phone number or email address “get verification code” and input the verification code.
- After that to set up your password and click “finish”, Registration completed successfully.
Log in
If you have registered an app account already, click “Log in “, with the
account to the Logging in page.
- the system automatically detects the current country/region, you can also manually select country/region.
- Enter your registered mobile phone number or email and password, then log in to the system with the steps shown as below.
Forget the password to Retrieve password
If you forget the password of APP account login, you can access Reset account password after password recovery process
- click “forget password”, as shown in Figure
- The system detects the current country / place automatically. Or you can select the country / place manually. For the number or email, click “get verification code”, as shown in the figure below.
- Input the verification code received by mobile phone or email, as shown in Figure below.
- Enter the new password and click “finish” to log in, as shown in the figure below.
Add device
- After logging in, plug the device into the electrical outlet, click “+” on the upper right corner on the app home page then select “add device” from the menu.
- Select “Electrical”, click “Socket (WI-FI)”, then select the 2.4G network with strong signal in the working area, enter the password, and click “Next.
- At this time, confirm that the WiFi indicator is flashing rapidly, and directly select “Next” in the “Reset the device” step to enter “Adding device”page and wait for the device to be searched.If the WiFi indicator is not flashing quickly, please follow the steps of “Reset the device” in the app to operate, then select “Next” to enter “Adding device” and wait for the device to be searched.
- After the device is found, click “+” to add the desired device, and then select “Done” to return to the device control interface.
Work with Amazon Alexa
- Open the Alexa App and click on “Skills & Games” in the menu.
- Search for “smart life”
- click on “ENABLE TO USE”
- Login to your Smart Life account
- Authorize your account to link with Amazon Alexa.
Click on “DISCOVER DEVICES”. When it finishes discovering, you will be able to control your smart socket with Amazon Alexa App, Echo or Echo Dot. You could also follow the optional steps in Amazon Alexa App to group and organize your smart devices. But those are not required.
After these initial setup steps, new devices you add to Smart Life App in later times will be linked to Amazon Alexa App automatically. You will not have to manually link them again. After the device is added, there will be five symbols on Amazon Alexa App, one for the device and 4 for individual switches. You could turn on/off each of them by voice using Alexa.
After the device is added, there will be several symbols on Amazon Alexa App, one for the device and a few for individual switches. You could turn on/off each of them by voice using Alexa.
**Work with Google Home[](https://manuals.plus/wp-
content/uploads/2022/07/POWRUI-AHR-087-Surge-Protector-USB-Wall-Charger- FIG16.png)**
- Open the Google Home App and click on “+” Add sign.
- 2.Select “Set up device” from the menu
- Click on “Have something already set up?”
- Search for “smart life” and select it from the list
- Login to your Smart Life account
- Authorize your account to link with Google Home. You are now able to control your smart socket with Google Home App or Speaker. You could also follow the optional steps in Google Home App to group and organize your smart devices. But those are not required.
After these initial setup steps, new devices you add to Smart Life App in later times will be linked to Google Home App automatically. You will not have to manually link them again. After the device is added, there will be five symbols on Google Home App, one for the device and 4 for individual switches. You could turn on/off each of them by voice using Google Home.
After the device is added, there will be several symbols on Google Home App, one for the device and a few for individual switches. You could turn on/off each of them by voice using Google Home.
After-sales Policy
Thank you very much for purchasing POWRUI products!Like what you just got?Help us by writing a feedback on Amazon and telling your friends and family.
Warning
- If there is radio freequency interference, it might affect the operation.
- Do not Use in bathroom and other damp locations.
- Please ensure the security of the electricity, resistive load current Can not be higher than 15A.
- Please keep the device out of the reach of children to avoid danger.