CRYSTORAMA DEL-90802-AG Delilah 2 Light 12 Inch Aged Brass Wall Sconce Wall Light Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA DEL-90802-AG Delilah 2 Light 12 Inch Aged Brass Wall Sconce
Wall Light
Product Information
The product is a lighting fixture model #DEL-90802-AG manufactured by Crystorama.com. It is a damp-rated fixture suitable for indoor use. The fixture requires 2 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. LED bulbs are recommended for extended use. The product comes with crystal sets and has a crystal bobeche and candle sleeves.
The product dimensions are as follows:
- Height: 12 1/4 inches
- Width: 5 1/2 inches
- Length: 16 inches
- Crystal Sets: A, B, C, D
- Crystal Bead Strings: 280mm long (10mm bead 18pcs), 330mm long (10mm bead 21pcs), 220mm long (10mm bead * 15pcs)
The product is accompanied by an assembly instruction manual with a warning about electrical danger and the need for installation by a licensed electrician in compliance with electrical codes.
The product is also accompanied by a warning about lead exposure and its potential health hazards.
Product Usage Instructions
Please follow the steps below to install the lighting fixture:
- Place the fixture parts on a soft cloth-covered platform before installation.
- Install the mounting plate onto the outlet box.
- Place the backplate over the mounting plate and secure it with the provided screws.
- Place the candle sleeve and crystal bobeche over the socket.
- Dress the crystals as illustrated.
Note: Ensure that the power is turned off before performing any electrical work.
ASSEMBLY INSTRUCTION MODEL #DEL-90802-AG
WARNING
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
- You will need 2- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE
DIMENSIONS
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of the fixture.
- Install the mounting plate onto the outlet box.
- Place the backplate over the mounting plate and secure it with the screws.
- Place the candle sleeve and crystal bobeche over the socket.
- Dress the crystals as illustrated.
Crystal Sets
- A. 1 Piece. 280mm long bead string–(10mm bead*18pcs)
- B. 1 Piece. 330mm long bead string–(10mm bead*21pcs)
- C. 1 Piece. (1) AS8-30mm Ball Crystal Sets
- D. 1 Piece. 220mm long bead string–(10mm bead*15pcs)
Part Number
- A. (2)-Machine screwv
- B. (1)-Mounting Plate
- C. (1)-Frame
- D. (2)-Screw
- E. (2)-Candle Sleeve; H3″, W 7/8″ -XSN90802AGCDL3.23IN
- F. (2)-Crystal Bobeche;Ø2 3/8″,H3/8″; 23mm center hole. -XSN90802BOB2.4IN
- G. (1)-Backplate; Ø5.5″xD7/8″ -XSN90802AGBKP5.5IN
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>