CRYSTORAMA SIL-B6008-BS Silas Eight Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA SIL-B6008-BS Silas Eight Light Chandelier
ASSEMBLY INSTRUCTION MODEL #SIL-B6008-BS
WARNING
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- You will need 8-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE This fixture is DAMP rated
DIMENSIONS
HOW TO INSTALL
- Screw one end(with shorter threading) of the center stem into the coupler on the top of the cluster.
- Slide the top ring slot across the top end of the center stem, resting the top ring against the check ring. (the check ring can be adjusted up or down, to loosen or tighten the hanging position of the jute strands)
- Secure the top ring with a hex nut. Place the metal plate over it and secure it with a fixture loop.
- Insert recommended bulb (not included).
- Attach the lower frame to the upper frame.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
PART NUMBER
MODEL #SIL-B6008-BS
- A. (1) – Mounting Hardware
- B. (1) – Canopy(W5.12”,H1.1″) #XRE6006BSCAN5.12IN
- C. (1) – Collar Ring
- D. (1) – Collar Loop
- E. (2) – Quick Link
- F. (1) – Hanging Chain(72″,4mm) #XRE6003BSCHA4MM
- G. (1) – Fixture Loop
- H. (1) – Round Metal Plate
- I. (1) – Hex Nut
- J. (1) – Top Ring
- K. (1) – Check Ring
- L. (1) – Upper Frame
- M. (1) – Center Stem(12.4″,9.5mm) #XRE6006BSSTEM12.4IN
- N. (1) – Finial #XRE6006BSFIN
- O. (1) – Lower Frame
- P. (1) – Slot
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>