CRYSTORAMA HAY-1400-PN Four Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA HAY-1400-PN Four Light Ceiling Mount
ASSEMBLY INSTRUCTION MODEL #HAY-1400-PN
WARNING
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- You will need 4-Candelabra Base Bulbs 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE The fixture is dry rated.
DIMENSIONS
How to Install
- Attach the mounting plate to the outlet box using two outlet screws.
- Hang the frame onto the mounting plate by hooking the cable wire into the slots as shown.
- Install bulbs (not included) and proceed to connect the power.
- Insert the pin into a crystal and then Insert the crystal onto the band ring.
- After all the crystals are installed, raise the fixture up to the ceiling and secure it with the finial.
DETAILED ILLUSTRATION
Crystal Sets
- A. 21Sets. (1)30x250mm
- B. 32Sets. (1)30x200mm
PART NUMBER
PART NUMBER MODEL #HAY-1400-PN
- A. (2)-Wire Connector
- B. (1)-Mounting Plate
- C. (2)-Outlet Box Screws
- D. (1)-Ground Wire
- E. (2)-Cable Wire
- F. (1)-Frame
- G. (1)-Washer
- H. (1)-Nut
- I. (1)-Check Ring
- J. (1)-Finial (XFB1400PNFIN)
PART BAGⅠ: Includes Parts A, C
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>