V-TAC VT-7308 LED Designer Surface Pendant Instruction Manual

V-TAC VT-7308 LED Designer Surface Pendant

Product Information

INSTALLATION DIAGRAM

Product Usage Instructions

Installation Instructions

1. Switch off the power before starting the installation.
2. Fix the ceiling plate to the ceiling with screws.
3. Connect supply wires to the luminaire as displayed in the wiring diagram.
4. Fix the ceiling base to the ceiling plate with screws accordingly.
5. Switch on the lamp to check the light.

Maintenance

1. Clean and check the lamp on time for safety and better performance.
2. Switch off the power before cleaning.

Remote Control Instructions

Remote Control Button Functions

• TURN ON: Press this button to turn on the lamp.
• BRIGHTNESS +: Press this button to increase the brightness of the lamp.
• COLD LIGHT: N/A

How to Connect/Disconnect Remote Control with the Fixture

LED INDICATOR

• Match Code function:

The remote control can only be used after matching code with the LED lamps. Follow the below method:

• * Turn on the LED power supply.

  • Long press the TURN ON button within 4 seconds at once.
  • If the LED lamp flashes once slowly, it means match code is successful. Note: Lighting fixture can only be controlled by the last successful match code.
  • If you want to control a different LED lamp, the previous remote control record will be automatically cleared by the system.
• Clear code function:

Turn off the LED power supply for 10 seconds, then turn on the LED power supply.

• * Long press the TURN-OFF button within 4 seconds at once.

  • If the LED lamp flashes twice slowly, it means clear code successfully. Note: Clear code function is based on the fixture already having a matched code. If not matched, long pressing the
    TURN OFF button will have no effect.

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of prod-uct for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
3. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
4. Proper grounding should be ensured throughout the installation.
5. Installation must be performed by a certified person.
6. For Indoor use only
7. Switch off the power in case of abnormal performance and contact a professional technician or local dealer

For any queries/issues with the product, please reach out to us at: SUPPORT@V-TAC.EU

For more products range or inquiries, please contact our distributor or nearest dealers: V-TAC EUROPE LTD.,
BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

References

• TAC.EU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>