V-TAC VT-7752 LED Designer Surface Pendant Instruction Manual

V-TAC VT-7752 LED Designer Surface Pendant

Product Information

• Product Name: LED Designer Surface Pendant
• Model: VT-7752
• Watts: 3
• Lumens: Not specified
• Color: Not specified
• CCT (Dimmable): Not specified
• Beam Angle: Not specified
• Body Type: Aluminum + PC lamp body
• Input Power: AC 220-240V, 50/60Hz
• Dimension: Not specified
• Remote Control Type: 2.4G RF TRIAC DIMMABLE
• Warranty: 3 years

INSTALLATION DIAGRAM

Installation

1. Switch off the power before starting the installation.

2. Fix the ceiling plate to the ceiling using screws.

3. Connect the supply wires to the luminaire following the wiring
   diagram.

4. Fix the ceiling base to the ceiling plate using screws
   accordingly.

5. Switch on the lamp to check the light.

Maintenance

1. Clean and check the lamp regularly for safety and better performance.
2. Switch off the power before cleaning.

Remote Control Instructions

The remote control can be used to control the LED lamp. Follow the instructions below to connect/disconnect the remote control with the fixture:

Remote Control Button Functions:

• TURN ON: Press and hold the turn-on button within 4 seconds of turning on the power supply. The LED lamp will flash once slowly to indicate successful code matching.
• BRIGHTNESS +: Not specified
• COLD LIGHT: Not specified
• TURN OFF: Press and hold the turn-off button within 4 seconds of turning on the power supply. The LED lamp will flash twice slowly to indicate successful code clearing.

Note: The lighting fixture can only be controlled by the last successful match code. If you connect a new remote control to the lamp, previous remote control records will be cleared by the system.
In case of any queries or issues with the product, please contact us at support@v-tac.eu. For more products range and inquiries, please reach out to our distributor or nearest dealers.

HOW TO CONNECT/DISCONNECT THE REMOTE CONTROL WITH THE FIXTURE

1. Match Code function:
   [The remote control only can be used after matching code with the LED lamps], follow the below method

   • Turn off LED power supply for 10s (seconds), then turn on LED power supply, long press turn on button within 4s (seconds) at once, if LED lamp will flash once slowly, it means match code is successful.
     Note: Lighting fixture can only control by last successful match code.

   • For instance, one lighting fixture can match code with many remote controls successfully, but only recent matched remote control can control this lamp, those previous remote control record will be auto clear by the system.

2. 2. Clear code function: Turn off LED power supply for 10s (seconds), then turn on LED power supply, long press turn off button within 4s (seconds) at once, if LED lamp will flash twice slowly, it means clear code successfully. Note: Clear code function based on fixture has matched code already, if not matched then long pressing the turn off button will result in no effect.
   For example:

3. There is no clear code function, if this remote control do not match code with fixture first.

4. Finish match code and then process clear code.

5. If fixture already matches code and then you use another new remote control to match code again, the previous remote control record would be auto-cleared by system, so now LED will be without clear code function now.

6. Remote control with remember record function after powering off. Fixture brightness and match code record will keep stay on LED remote control’s storage after using the remote control adjust fixture brightness. So it can use previous remote control to control previous lamp after powering on.

TECHNICAL DATA

INTRODUCTION & WARRANTY

Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of prod-uct for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING

1. Please make sure to turn off the power before starting the installation.
2. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
3. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
4. Proper grounding should be ensured throughout the installation.
5. Installation must be performed by a certified person.
6. For Indoor use only
7. Switch off the power in case of abnormal performance and contact a professional technician or local dealer

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

References

• TAC.EU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>