V-TAC VT-11016 Led Tracklight Fitting Instruction Manual
- June 12, 2024
- V TAC
Table of Contents
V-TAC VT-11016 Led Tracklight Fitting
Product Information
LED TRACKLIGHT FITTING
Technical Data:
- Model: VT-11016
- Max Rated Load: Base
- Dimension: N/A
- Material: Aluminum+PC
- Input Power: AC: 220-240V, 50Hz
- Warranty: 3 years
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Switch off the power before starting the installation
- Connect the track wires as per the wiring diagram.
- Remove the lamp cover from the lamp body by rotating anti-clockwise.
- Install the lamp(GU10) into the lamp holder.
- Install the lamp cover to the lamp body by rotating clockwise.
- Fix the fixture on the track.
- Turn the adaptor slide switch to switch on the light.
Introduction & Warranty
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation should only be done by a certified electrician.
- Proper grounding should be ensured throughout the installation.
- For indoor use only.
This marking indicates that this product should not be disposed of with other household wastes.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- Installation should only be done by a certified electrician.
- Proper grounding should be ensured throughout the installation.
- For indoor use only.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
[email protected] FOR MORE PRODUCTS RANGE, INQUIRY
PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B