SIRUI A100B Bi-Color Inflatable Balloon LED Light User Manual

A100B Bi-Color Inflatable Balloon
LED Light User Manual

Foreword

The A100B Bi-Color Inflatable Balloon LED Light is a soft continuous light that is suitable for almost all shooting occasions (portraits, products, interviews, etc.) with great portability and easy operation.

Features

1. All-in-one design.
2. Foldable for easy storage and transport.
3. Multiple setup solutions.
4. Soft and even lights.

What’s in the Box

Names of Parts

Power Management

1. Adapter Power Supply
   Input: 100-240V, 50/60Hz

2. Battery Power Supply
   Install one V-mount battery to supply power (battery can not be charged).
   And the support voltage is from 14.8 to 16.8V.

Operation

1. Power On/Off
   When powered by the adapter, press the switch to the left (I) to turn on the light and return the switch to the middle to turn off the light.
   When powered by the battery, press the switch to the right (II) to turn on the light and return the switch to the middle to turn off the light.
   Turn on the light to start inflation (make sure the valve is well plugged).
   Inflation stops when the light is fully inflated.
   Remove the valve plug to deflate the light.

2. Setup Options
   2.1 Stand adapter: stick the adapter to the magnetic block. You can handheld the adapter for run-and-gun shooting or insert it into a stand for stable shots. Press and hold the upper and lower buttons to remove the adapter.
   2.2 Magnetic absorption: absorb the light onto metallic surfaces.
   2.3 Metal rings: hang the light from different positions.

3. Mode Selection: Hit the M button to select CCT/FX mode
   3.1 CCT Mode.
   3.1.1CCT adjustment: Turn the dial to adjust the CCT in at least 100K increments from 2800K to 8500K.
   3.1.2 Intensity adjustment: Turn the DIM dial to adjust the intensity in at least 1% increments from 0% to 100%.
   3.2 FX Mode

No.| Display| Situation| DisplayA| DisplayB| DisplayC
---|---|---|---|---|---
1| | Lightning| Discontinuous| Frequent| Sustainable
2| Flash| Flash| Press Conference| Paparazzi
3| Broken Bulb| Discontinuous| Frequent| Sustainable
4| TV| Slow| Medium| Quick
5| Candle| Discontinuous| Frequent| Sustainable
6| Fire| Firewood| Campfire| Fire Hazard
7| Firework| Brief| Continuous| Show
8| Blast| Discontinuous| Frequent| Sustainable
9| RGB Cycle| Slow| Medium| Quick
10| Impulse| Slow| Medium| Quick
11| Welding| Discontinuous| Frequent| Sustainable
12| SOS| Slow| Medium| Quick

APP Control

1. Press and hold the M button to turn on Bluetooth. (Press and hold the M button again to turn off Bluetooth.)
2. Scan the QR code to download the “SIRUI Light” App.
3. Turn on Bluetooth on the smartphone and enter the “SIRUI Light” App. Select the device you want from the list.

https://api.sirui.com/app/downloadEn

For detailed steps, please refer to the APP instruction manual.

Installation

1. You can mount the light to a stand, attach the light to a metal surface, or fix the light to a specific position via the metal rings on the back.
2. Grid Installation
3. Unfold the grid and spread it over the light.
4. Hook the grid to the light via the 4 metal rings.
5. Make sure the edge of the grid is aligned with the light body.

Specifications

• Product design and specifications are subject to change without notice.

Cautions

1. The product should be kept in a cool, dry and ventilated place.
2. Avoid using the light in humid, dusty, overheated environments.
3. Using an unauthorized power adapter can damage the product and void the warranty.

Maintenance

1. If there is something wrong with the light when it is working, please turn it off first.
2. It is normal that the light gets a bit hot when it is working.
3. Maintenance must be performed by the authorized maintenance department which can provide original accessories.
4. This product, except for consumables, supports a one-year warranty.
5. Unauthorized service will void the warranty.
6. If the product had failures or was wetted, do not use it until it is repaired by professionals.
7. Changes made to the specifications or designs may not be reflected in this manual.

Thank you for purchasing SIRUI products! SIRUI will provide free warranty service if the product fails due to poor materials and workmanship under normal use. The global agents are ranked in no particular order. If after- sales service is required, please contact the local agent first.
Headquarter of SIRUI Optical Co., Ltd. After-Sale Service Hotline: 400 830 2299 Complaints Hotline: 181 6563 9388
Singapore/T K Foto Technic Pte Ltd
Address: Funan 107 North Bridge Rd #03-09 Singapore 179105 Tel: +65 6904 6610 Fax:+65 6904 6620 http://www.tkloto.com.sg E-mail: ark@tkfoto.com.sg

Warranty

SIRUI Optical GmbH, Ernst-Augustin-Str. la, 12489 Berlin, guarantees purchasers that this product will remain free from manufacturing and workmanship defects for 6 years from the date of purchase. Damage caused by mechanical damage, excessive heat, improper use and loss are not covered by this warranty. This warranty is valid only in connection with this warranty card and a receipt issued in Europe. Statutory rights – in particular the statutory warranty rights – remain unaffected. In the event of a warranty claim please contact the service centre listed overleaf.

Warranty Period
6 Years
2 Years (Free replacement for one year)
1 Year
6 Years (Electronic components: 3 years)
2 Years

European Service Center: SIRUI Optical GmbH
Ernst-Augustin-Str. 1a
12489 Berlin
Germany Phone: +49 30 991 94 94 00 Email Address : info@siruioptical.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>