logitech G PRO X Gaming Headset User Guide

SETUP GUIDE

PC SETUP

1. Plug in microphone

2. Plug console/PC cable into headset

3. Using USB DAC:
   1 Plug console/PC cable into USB DAC
   2 Plug USB DAC into PC1

4. Using PC sound card:
   1 Plug console/PC cable into PC splitter
   2 Plug PC splitter into PC’s headphone and mic ports
   1 Included USB DAC enables 5-band EQ tuning,
   DTS Headphone:X 2 0 and Blue VO!CE microphone filters on PC Requires Logitech G HUB software download 5-band EQ tuning, DTS Headphone:X 2 0 and Blue VO!CE are not available while using PC sound card

CONSOLE SETUP (XBOX ONE™, PLAYSTATION® 4)

1. Plug in microphone
2. Plug console/PC cable into headset
3. Plug other end into controller
   2 Instructions may vary based on your system version Please check your console manual for additional guidance Xbox One and PlayStation 4 operate in stereo mode only via analog cable Some Xbox One controllers may require Xbox One Stereo Headset Adapter, sold separately 5-band EQ tuning, DTS Headphone:X 2 0 and Blue VO!CE are not available while connected to console controller

MICROPHONE POSITION SETUP

1. Remove microphone
2. Plug in mobile cable to headset
3. Plug mobile cable into phone
   3 5-band EQ tuning, DTS Headphone:X 2 0 and Blue VO!CE are not available on mobile devices

MICROPHONE PLACEMENT

Ideal placement of the microphone is at the corner of your mouth In this position, your voice can be heard clearly without the microphone picking up breathing sounds

FREQUENTLY ASKED QUESTIONS

Q: How do I save a custom EQ to the USB DAC?
A: Connect the USB DAC to a PC’s USB port and use G HUB software to download a pre-configured EQ from your favorite pro gamer, or to configure your own custom EQ settings After using G HUB to save your EQ to the DAC, you can then enjoy your custom settings even on tournament PCs with no G HUB software installed
Q: Can I save Blue VO!CE settings to the USB DAC?
A: No, Blue VO!CE technology is only available while using G HUB software and the USB DAC on PC
Q: Can I save DTS Headphone:X 2 0 settings to the USB DAC?
A: No, DTS Headphone:X 2 0 is only available while using G HUB software and the USB DAC on PC

www.logitechG.com/GHUB
www.logitechG.com/support/proxheadset

© 2019 Logitech, Logitech G, Logi and their respective logos are trademarks or registered trademarks of Logitech Europe S A and/or its affiliates in the U S and other countries For DTS patents, see http://patents.dts.com Manufactured under license from DTS Licensing Limited DTS, the Symbol, & DTS and the Symbol together, Headphone:X, and the DTS Headphone:X logo are registered trademarks or trademarks of DTS, Inc in the United States and/or other countries All other trademarks are the property of their respective owners WEB-621-001474 003

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>