iOttie 606MGIO202 Velox Magnetic Wireless Charging Duo Stand Owner’s Manual
- June 12, 2024
- iOttie
Table of Contents
iOttie 606MGIO202 Velox Magnetic Wireless Charging Duo Stand
For optimal charging, please follow the detailed instructions within this manual when using the Velox Magnetic Wireless Charging Duo Stand.
Product Information
At a Glance
Magnetic Mounting Face | 7.5W
| Item | Input | Output | Cable Length | Stand Length | Width | Height | Weight |
|---|---|---|---|---|---|---|---|
| Specification | DC 5V3A 9V2A | 5W, 7.5W | 5 | 3.75 | 3.75 | 5.96 | 10.58 oz |
Device Compatibility
The magnetic mounting face is designed for use with MagSafe-compatible iPhones and cases. Compatible devices include the iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max, and the iPhone 12 series.
- iPhone 13 Pro Max & 13 Pro
- iPhone 13 & 13 Mini
The wireless charging pad is designed for use with AirPods, other wireless earbuds, or Qi-enabled accessories.
Setting Up the Velox Duo Stand
Connecting to Power
Simply plug the built-in USB-C cable into a power source, or a USB-C adapter (not included).
Charging Your Qi-Enabled Device
Place your AirPods or other Qi-enabled device on the built-in charging pad. Wireless charging will begin automatically.
Charging Your iPhone
Place your MagSafe-compatible iPhone on the magnetic mounting face. Your
iPhone will be held in perfect alignment and wireless charging will begin
automatically.
Note: When Qi-enabled devices are accurately aligned and charging, the
LED indicator light will turn on.
Operation Warnings
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
- L’ appareil ne doit pas produire de brouillage; Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.
Important Safety Information
This manual contains important safety and operating instructions for the VeloxTM Magnetic Wireless Charging Duo Stand (MGSFIO202).
Index
For optimal charging, please follow the detailed instructions within this
manual when using the Velox Magnetic Wireless Charging Duo Stand.
Product Information
- At a Glance
- Device Compatibility
- Product Specifications
Setting Up the Velox Duo
- Stand Connecting to Power
- Charging Your iPhone
- Charging Your Qi-Enabled Device
At a Glance
USB-C wall charger not included.
Device Compatibility
The magnetic mounting face is designed for use with MagSafe-compatible iPhones and cases. Compatible devices include the iPhone 13, iPhone 13 mini, iPhone 13 Pro, iPhone 13 Pro Max, and the iPhone 12 series.
The wireless charging pad is designed for use with AirPods, other wireless earbuds, or Qi-enabled accessories.
Product Specifications
| Item | Specification |
|---|---|
| Input | DC 5V3A \ 9V2A |
| Output | 5W, 7.5W |
| Cable Length | 5′ |
| Stand Length | 3.75″ |
| Width | 3.75″ |
| Height | 5.96″ |
| Weight | 10.58 oz |
Setting Up the Velox Duo Stand
Connecting to Power
- Simply plug the built-in USB-C cable into a power source, or a USB-C adapter (not included).
Charging Your iPhone
- Place your MagSafe-compatible iPhone on the magnetic mounting face. Your iPhone will be held in perfect alignment and wireless charging will begin automatically.
Charging Your Qi-Enabled Device
- Place your AirPods or other Qi-enabled device on the built-in charging pad. Wireless charging will begin automatically.
- Note: When Qi-enabled devices are accurately aligned and charging, the LED indicator light will turn on.
Operation Warnings
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum
distance 20cm between the radiator & body.
Safety Information
Important
- This manual contains important safety and operating instructions for the Velox™ Magnetic Wireless Charging Duo Stand (MGSFIO202).
- Please read all instructions and safety information before using this product. If damage occurs as a result of failure to follow the instructions, the warranty will be voided.
- Do not expose to rain, moisture, or snow.
- Do not operate this magnetic wireless charging stand if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
- Do not disassemble this magnetic wireless charging stand; take it to a qualified service person when service or repair is required. Incorrect reassembly may result in electric shock or fire.
- To reduce the risk of electric shock, unplug the device before attempting any maintenance or cleaning.
- Avoid extended exposure to direct sunlight, which may damage the device.
- Exposing this product to open flames may cause it to explode.
- Do not expose this product to strong magnetic fields.
- Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean.
- This product complies with the radio interference requirements of the European Community.
- This product is designed and manufactured with high quality materials and components, which can be recycled and reused.
- The product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop you bought this product.
- Designed in New York City. 20 W 37th St, New York, NY 10018.
- Made in China. U.S. Patent Pending ©2021 iOttie. All rights reserved. iOttie and Velox are registered trademarks owned by iOttie, Inc. John 3:16 Apple, the Apple logo, iPhone, iPod, iPod touch, Mac, macOS, MagSafe and Siri are trademarks of Apple Inc., registered in the U.S. and other countries.
- The Velox Magnetic Wireless Charging Duo Stand is backed by a 2 year warranty
- Compatible with MagSafe iPhone series and cases, and Qi-enabled accessories.
Charging Your MagSafe iPhone
- Simply place your MagSafe compatible iPhone on the magnetic mounting face. Magnets will hold your phone in perfect alignment and wireless charging will begin automatically.
Charging Your Wireless Accessories
- Charge any Qi-enabled earbuds on the built-in charging pad by setting your device on top of the pad. Wireless charging will begin automatically.
Powering Your Velox Duo Stand
- Plug the built-in USB-C cable into a USB-C charger and connect to a power source.
- USB-C wall charger is not Included
- We’d love to hear from you!
- Don’t forget to leave a review.
- Follow @iottie for the latest news and updates!
- Please visit our website for more information www.iottie.com
- Full Manual Link: https://www.iottie.com/manual/veloxduostand
FCC
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This device complies with Part 15 of the FCC Rules. Operation Is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that maycause undesired operation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dlerent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 15cm between the radiator & body. This equipment can be used
in portable exposure conditions.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation Is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment This equipment shall be installed and operated with minimum
distance 0cm between the radiator & body.
Apple is a trademark of Apple Inc., registered in the U.S. and other
countries. Android is a trademark of Google LLC. Samsung is a trademark of
Samsung Electronics Co., Ltd.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>