Esatto EUF268W 238L Upright Hybrid Frost Free Freezer User Manual

FLUKE 572-2 Infrared Thermometer

Welcome
Congratulations on purchasing your new appliance. The Esatto brand is proudly distributed within Australia by Residentia Group Pty Ltd. Please refer to the warranty card at the rear of this manual for information regarding your product’s parts and labour warranty, or visit us online at: www.residentiagroup.com.au
At Residentia Group, we are customer obsessed and our Support Team are there to ensure you get the most out of your appliance. Should you want to learn more about your unit such as the various temperature guides or importantly taking care of the appliance, our Support Team are here to help. You can use our online Support Centre at any time by visiting: www.support.residentiagroup.com.au

Or you can contact us via phone by dialing: 1300 11 HELP (4357). It is important that you read through the following use and care manual thoroughly to familiarise yourself with the installation and operation requirements of your appliance to ensure optimum performance. Again, thank you for choosing an Esatto appliance and we look forward to being of service to you. Kind Regards, The Residentia Team

Safety Warnings

IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Make sure you understand all instructions and warnings. Keep the manual in a safe place for future reference, along with the completed warranty card and purchase receipt. If you sell or transfer ownership of this product, pass on these instructions to the new owner. Always follow basic safety precautions and accident prevention measures when using an electrical appliance, including the following:

IMPORTANT : Pay particular attention to messages that contain the words DANGER, WARNING or CAUTION. These words are used to alert you to a potential hazard that can seriously injure you and others. The instructions will tell you how to reduce the chance of injury and let you know what can happen if the instructions are not followed.

This symbol alerts you to take care as this appliance contains a flammable refrigerant (isobutane) and insulation blowing gas (cyclopentane). Do not expose it to high heat, sparks and open flames.
The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a gas with a high level of environmental compatibility, which is nevertheless flammable. During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit become damaged.

WARNING Do not damage the refrigerant circuit! Never use an appliance with a damaged refrigerant circuit! If the refrigerant circuit becomes damaged, avoid proximity to open fires and all types of heat and ignition sources. Thoroughly ventilate the room in which the appliance is located.

DANGER : It is hazardous for anyone other than an authorised service person to service this appliance.
In Queensland, the authorised service person MUST hold a Gas Work Authorisation for hydrocarbon refrigerants to carry out servicing or repairs that involve the removal of covers.
The room for installing the appliance must be at least 1m³ per 8g of refrigerant. The amount and type of refrigerant in the appliance can be found in the Technical Specifications on page 19 and on the rating plate, found on the appliance.

Usage Conditions and Restrictions

• Domestic use only : This appliance is intended for indoor household use only. It is not intended for commercial, industrial or outdoor use. It is not intended for use in a recreational vehicle.
• Purpose : Do not use this appliance for anything other than its intended purpose. Other uses are not recommended and may cause fire, electric shock or personal injury.
• Attachments : The use of attachments is not recommended by the appliance manufacturer and distributor as they may be hazardous.
• Improper use : Damage due to improper use, or repairs made by unqualified personnel will void your warranty. We assume no liability for any eventual damages caused by misuse of the product or non compliance with these instructions.

General Safety Instructions Cont.

• WARNING Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

• Usage restriction: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instructions concerning use of the appliance by a person responsible for their safety.

• Children: Supervise young children to ensure they do not play with the appliance. Never allow children to operate, play with or crawl inside the appliance.

• WARNING Do not use electrical appliances inside the appliance, unless they are of the type recommended by the manufacturer.

• Explosive or flammable substances: Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. Do not store or use petrol or any other flammable vapours and liquids in the vicinity of this or any other appliance. Do not use such substances for cleaning the appliance. The fumes can create a fire hazard or an explosion.

• Damage : Do not use the appliance if the power cord, plug or the appliance itself is damaged. If the cord is damaged, contact the after sales support line and have the cord replaced by qualified personnel in order to avoid a hazard.

• WARNING Do not damage the refrigerant circuit.

• Do not modify: Do not attempt to alter or modify this appliance in any way.

• Repair: Do not attempt to repair or replace any part of this appliance unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician.
  Contact the after sales support line for advice.

• WARNING Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance

Electrical Safety

• Voltage : Before connecting and turning on the appliance, ensure the electrical voltage and circuit frequency correspond to that indicated on the appliance rating label.
• Earthing : This appliance should be properly earthed for your safety. The power cord of this appliance is equipped with a three-prong plug for use in standard wall outlets to minimise the possibility of electrical shock. Do not modify the cord and/or plug provided with the appliance. Improper use of the earthed plug can result in the risk of electric shock.
• Connection : This appliance requires a standard 220-240 V AC 50Hz electrical outlet. Do not overload the electrical circuit.
• Power cord : Do not kink or damage the power cord; do not leave it exposed or dangling. Secure it at the back of the appliance so no one steps on or places anything on the cord or against it. Keep the cord out of reach of children. When moving the appliance, make sure not to damage the power cord.
• WARNING When positioning the appliance, ensure the supply cord is not trapped or damaged.
• Auxiliary Items: Do not use an inverter, adaptor or extension cord with this appliance. If the cord is too short, have a qualified electrician install an outlet near the appliance. Use of an extension cord and an inverter can negatively affect the performance of the unit.
• Protect from moisture: To protect against the risk of electric shock, do not immerse the unit, cord or plug in water or spray it with any other liquid. Do not connect or disconnect the electric plug when your hands are wet. Turn the power switch off before removing the plug from the socket.
• WARNING Disconnect! To reduce the risk of fire, electric shock or personal injury, always unplug the appliance from the socket when not in use, when moving and before cleaning or servicing. Never unplug the unit by pulling the power cord. Always grip the plug firmly and pull straight out from the power point.
• Electrical work: Any electrical work required for the installation of this appliance should be carried out by a qualified electrician.

Never use this appliance with a damaged refrigerant circuit! If the coolant circuit becomes damaged, avoid proximity to open fires and all types of heat sources. The room in which the appliance is located should be ventilated for a few minutes.

Installation
Heavy: This appliance is heavy, take care when moving it. To avoid back or other injury, consider a two person lift or mechanical aid when installing it. Failure to do so can result in back or other injury.
Damage: When unpacking, check the appliance carefully for damage. If it is damaged, do not install the appliance. Contact our after sales support centre on 1300 43 57 for advice on examination or return of the damaged appliance. Protect from moisture: Install the appliance in an indoor area protected from wind, rain, water spray or drips. Protect from heat: Do not install the appliance next to an oven, grill or other source of high heat, or where it will be exposed to direct sunlight for prolonged periods of time.

WARNING Ventilation : To ensure proper ventilation, keep any ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstructions. Ensure adequate air circulation around the appliance to prevent overheating. Level: Install the appliance level in order to ensure proper operation.

Cleaning and Maintenance
Disconnect: Unplug the appliance before cleaning or servicing. Failure to do so can result in electric shock, injury or death. Do not connect or disconnect the plug when your hands are wet.
Flames: Do not let open flames or ignition sources enter the appliance. Flammable/explosive substances: Never clean this appliance with flammable fluids. Do not store or use volatile, flammable or explosive propellants or liquids in or close to this or any other appliance. The fumes can create a fire hazard or explosion. Solvents: Do not use solvent based cleaning agents or abrasives on the interior as these may damage or discolour the surfaces of the appliances.

WARNING Do not use mechanical devices or other means to accelerate the defrosting process. Never use a sharp or metal instrument to remove frost or clean the appliance. Use a plastic scraper, if necessary. Service: Do not attempt to repair, modify or replace any part of the appliance unless specifically recommended in this manual. Refer all other servicing to a qualified technician, or contact the after sales support line for advice on examination or repair of the appliance.

Responsible disposal

Note : At the end of its working life, do not throw this appliance out with your household rubbish. Electrical and electronic products contain substances that can have a detrimental effect on the environment and human health if disposed of inappropriately. Observe any local regulations regarding the disposal of electrical consumer goods and dispose of it appropriately for recycling and recovery of the refrigerant and blowing agent. Contact your municipal authorities for advice on recycling facilities in your area.

WARNING This refrigeration appliance contains flammable refrigerants and insulation blowing gases, which must be removed before disposal. Contact your municipal authorities for any codes or regulations concerning the disposal of such materials.

Getting Started

Unpacking

• Packaging materials: This appliance has been packaged to protect it against transportation damage. Remove all packaging materials from around and inside the appliance and keep the original packaging carton and materials in a safe place. It will help prevent any damage if the product needs to be transported in the future, and you can use it to store the appliance when it is not in use. In the event the carton is to be disposed of, please recycle all packaging materials where possible.
• Suffocation : Plastic wrapping can be a suffocation hazard for babies and young children, so ensure all packaging materials are out of their reach and disposed of safely.
• Power cord : Unwind the power cord to its full length and inspect it for damage. Do not use the appliance if it or its cord have been damaged or are not working properly. In case of damage, contact our after sales support line for advice on examination, repair or return of the damaged product.
• Read the manual : Read this manual to familiarise yourself with the appliance. Pay particular attention to the safety instructions on the previous pages.
• Clean : To remove any dust from transit and storage, clean the interior and exterior surfaces of the appliance with lukewarm water and a soft cloth. Dry thoroughly. Important: do not use harsh or abrasive detergents or powders as these will damage the finish.

Installation

• Two person installation: Use two or more people to move and install the appliance. Failure to do so can result in back or other injury.
• Freestanding design: This appliance is designed to be freestanding only, and should not be recessed or built-in.
• Floor surface: This appliance must be properly positioned on a dry, sturdy, level surface that is strong enough to support it when it is fully loaded.
• Ambient temperature: The ambient temperatures must correspond to the climate class ( T ) indicated on the rating plate of the appliance: 16° C – 38° C
• Clearances: Ensure that air can circulate freely around the back of the cabinet, which is necessary to cool the compressor and condenser. Allow at least 10cm clear space at the back, 10cm at the sides of the unit and 30cm between the top and any surface above. If you are installing your refrigerator next to a fixed wall, leave sufficient space on the hinge side to allow for the door to swing open.

Do NOT install/use the appliance in the following locations/situations:

• In moist areas or areas of high humidity.
• In a recreational vehicle, or for use with an inverter.
• In direct sunlight, near heat sources, next to an open flame, cooking or heating appliance, or near any other source of high heat.
• Direct sunlight may affect the acrylic coating and heat sources may increase the unit’s power consumption. For best energy efficiency install the appliance in the coolest area of the room.
• In an area with extreme cold ambient temperatures.
• In an area with excessive moisture and high humidity. Make sure it is protected from elements such as wind, rain, water spray or drips.
• In an area where petrol or other explosive and/or flammable liquids or fumes are used or stored. The fumes can create a fire hazard or explosion.

Electrical connection

• WARNING It must be possible to disconnect the appliance from the mains power supply; the plug must therefore be easily accessible after installation.

• Before plugging in your new upright fridge/freezer, let it stand upright for at least 2 hours.
  This will allow the refrigerant gases to settle into the compressor and reduce the possibility of a malfunction in the cooling system.

• The appliance must be earthed. The plug of the power supply cord is equipped with a contact for this purpose. Do not under any circumstances cut or remove the third (earth) prong from the power cord. If the plug does not fit your outlet, consult a licensed electrician for advice to have the outlet changed.

• Plug the unit into a dedicated, properly earthed wall outlet. Ensure that your outlet voltage and circuit frequency correspond to the voltage stated on the rating label.

• Secure the upright fridge/freezer’s supply cord behind the unit. Do not leave it exposed or dangling to prevent injury and accidental disconnection from the power supply.

• Adjust the temperature control as described below.

• When first starting up, and after a period out of use, allow the unit to cool down for at least 2–3 hours (4 hours if starting up during warm weather in summer) before placing food in the upright fridge/freezer.

Levelling the feet
The diagram below is only for reference. The actual configuration will depend on the physical product or statement by the distributor

Adjusting procedures:

1. Turn the feet clockwise to raise the refrigerator;
2. Turn the feet counterclockwise to lower the refrigerator;
3. Adjust the right and left feet based on the procedures above to a horizontal level.

Reversing the door

1. Unplug your refrigerator and remove all food from the door shelves. Remove all food from the inner door liner. Fix the door by tape.
2. Dismantle the upper hinge cover, screws and upper hinge, and remove the hole cover from the other side. Unplug the wiring connector on the right side of refrigerator top in order of numbering shown below.
3. Dismantle the door and right bottom hinge assembly (hinge shaft adjustable foot hinge), disassemble the right bottom hinge assembly,and assemble the hinge shaft and adjustable foot on the other side of hinge, then assemble the whole hinge assembly on the other side of refrigerator.
4. Remove the door upper cover, install the upper hinge sleeve , door signal line to the other side and install the door upper cover. Dismantle the right door stopper,sleeve pipe from the right bottom of door, insert the sleeve pipe into hinge hole of left bottom of door, and take out left door stopper from the accessory bag, and assemble it on left bottom of door, the right door stopper could be reserved for future use
5. Take out the left top hinge and the left top hinge cover from the accessories package. Place the door on bottom hinge and mount top left hinge. Connect terminal 5 with terminal 1, then connect terminal 6 to the door switch. Connect terminal 2 with terminal 4. Mount top hinge cover and hole cover.

Product Overview

Your Upright Fridge/Freezer

Key:

1. Digital Temperature Controls
2. Fridge Mode
3. Freezer Mode
4. Quick Cooling
5. Quick Freezing
6. Temperature Setting
7. Switch Fridge/Freezer Mode
8. 7 × Drawers
9. Adjustable Foot

Functions:
When the fridge power is on: All temperature icons will illuminate within 3s after powering on. When powering on for the first time, the default set temperature is set at -20° C. After that, every time you start the fridge, it will run in accordance to the last set temperature before powering off.

Operation Instructions

Using for the First Time
When you install your appliance, keep the refrigerator still for two hours before connecting it to power supply. It is the best to wait 2-3 hours before adding any fresh or frozen foods. In summer or when the ambient temperature is high, please wait for at least 4 hours.

IMPORTANT : Once the unit has started, continuous operation is recommended. Please try and avoid turning the unit off and on as this may affect the service life.

Noise From Your Upright Fridge/Freezer

• You may notice that your upright fridge makes some unusual noises from time to time. Most of these are perfectly normal, but you should be aware of them.
• These noises are caused by the circulation of the refrigerant liquid in the cooling system. This is not a fault and will not affect the performance of your unit and is common with all modern fridges.

Door Clearance
Please allow enough space to open the door and drawers.

Refrigerator Mode
This mode helps keep for food for short-term storage and is suitable for storing a variety of fruits, vegetables, beverages and other food items ideally between 3 to 5 days.
Freezer Mode
This low temperature helps keep food for long-term storage and is suitable for storing frozen food and making ice.

Storage tips:

• Wait until hot food has cooled to room temperature before placing into the refrigerator.
• For food safety, we recommend sealing up any food before placing into the refrigerator.
• For quicker freezing and easy access, divide your meat and large items into smaller pieces before placing into the freezer compartment.
• The glass shelves can be repositioned up or down to suit your storage requirements.

Note:

• Storage of too many items during operation after the initial connection of your appliance to power may adversely affect the freezing effect of the refrigerator.
• Do not block the air outlet or the freezing effect of the refrigerator will also be adversely affected.

The Display
If there is no failure, the screen will display the sett temperature of the fridge/freezer. On the occurrence of a failure, the corresponding icons will give a combination of blinks. The error codes and types are shown as follows:

Refrigerator

illuminate at same time
E5| Refrigerator defrosting sensor failure| Icon ”  ”  Icon “ 3 ” illuminate at same time
E6| Communication error| Icon “ 2 ”  Icon “ 4 ”       illuminate at same time
E7| Ambient temperature sensor failure| Icon ”  ”  Icon “ 4 ” illuminate at same time
E10| Sticking button problem| Icon “ 2 ”  Icon “ 3 ”       illuminate at same time

Freezer

illuminate at same time
E5| Refrigerator defrosting sensor failure| Icon ”  ” Icon “ -22 ” illuminate at same time
E6| Communication error| Icon “ 2 ”      Icon “ -20 ” illuminate at same time
E7| Ambient temperature sensor failure| Icon ”  ” Icon “ -20 ” illuminate at same time
E10| Sticking button problem| Icon “ 2 ”       Icon “ -22 ” illuminate at same time

Switching Fridge/Freezer mode
Press the Fridge/Freezer button for 3 seconds to achieve the conversion. The corresponding temperature icons will illuminate.

Temperature setting
The temperature setting will be changed once you press Temperature Setting button ( Then, the refrigerator will run according to the new temperature setting after 15s.

Quick Cooling
Enter: Under refrigerator mode, press the button( ) until the icon illuminates.
During quick cooling mode, the refrigerator runs according to the temperatures set at 2° C and it will exit this mode automatically after running for 150 minutes or temperature setting or mode setting.

Quick Freezing
Enter: Under freezer mode, press the button( ) until the icon illuminates.
During quick cooling mode, the refrigerator runs according to the temperatures set at -24° C and it will exit this mode automatically after running for 150 minutes or temperature setting or mode setting.

Usage Tage Tips

• Do not store food uncovered in the upright fridge/freezer. Always use good quality, refrigeration-proof packaging to maintain food quality. Remove any air from packages of solid food and seal the bags tightly before refrigerating.
• Keep portions small to ensure they are refrigerated (and subsequently defrosted) rapidly.
• Make sure that fresh, unfrozen food packages do not touch food that is already frozen, thus avoiding a temperature rise in the frozen food.
• When freezing food, do not push food together too much, leave some space for air to circulate around each item. Do not place packages directly against the back wall.
• When buying frozen food, only buy quantities that you can store straight away; use an insulated container for your shopping and when you get home, place the food in the chilling compartment immediately.
• When storing pre-packed, commercially frozen food, follow the food manufacturer’s instructions for storing the food in a home fridge or freezer. Do not exceed any storage times listed on the packaging.
• Once you have opened a packet of frozen food, re-wrap it airtight to prevent surface evaporation which causes drying or freezer burn.
• Do not place carbonated liquids such as bottles of fizzy drink in the freezer as the container could explode under pressure and damage the chiller.
• Do not refreeze food once it has been defrosted.
• Frozen food which has thawed accidentally should either be used immediately or thrown away. Alternatively, if the food is uncooked and has not been completely defrosted, it may be cooked and then refrozen.
• CAUTION! Do not remove items from the chilling compartment if your hands are damp or wet as this could cause skin abrasions.

Energy Saving Tips

• The appliance should be placed in the coolest area of the room, away from heat producing appliances or heating ducts. Please avoid placement in direct sunlight.
• Let hot foods cool to room temperature before placing them in the appliance.
• Do not overload the appliance with unfrozen food as this may cause it to freeze slowly and risk food spoilage.
• Be sure to wrap foods properly and wipe containers dry before placing them in the appliance. This cuts down on frost building up inside in the unit.
• Please do not wrap items in aluminium foil, wax paper or paper towel. This materials interfere with cold air circulation, making the appliance less efficient.
• Organise and label food to reduce door openings and extended searches. Remove as many items as needed at one time, ensuring the unit is opened as few times as possible.

Maintenance and Cleaning

Cleaning

WARNING
Before cleaning the appliance, make sure it is switched off and disconnected from the power supply. Failure to do so can result in electric shock or injury.

• Wash the inside surfaces and the interior accessories with a damp, warm cloth moistened in a water and baking soda solution. The solution should be about 2 tablespoons of baking soda to 1 litre of water. Rinse and wipe dry with a soft cloth.
• Clean the outside of the unit with a damp, well wrung out cloth, keeping the area of the controls dry. Keep the lid gasket (seal) clean.
• Never use boiling water to accelerate defrosting as it may damage the plastic components.
• After everything is dry, place appliance back into service.
• Allow approximately 1–2 hours for the cabinet to cool down again (depending on the length of time the appliance was disconnected from the power).

WARNING
Never clean the unit with an abrasive, acid, oil or solvent based cleaning agent. Never use flammable fluids or sprays for cleaning as the fumes from these substances can create a fire hazard or Explosion.

Defrosting
The refrigerator is made based on the air-cooling principle and thus has automatic defrosting function. Frost formed due to change of season or temperature may also be manually removed by disconnection of the appliance from power supply or by wiping with a dry towel.

Out of operation
Power failure: In case of power failure, even if it is in summer, foods inside the appliance can be kept for several hours; during the power failure, reduce the times the door is opened shall be reduced, and no more fresh food shall be put into the appliance.

Long-time nonuse : The appliance shall be unplugged and then cleaned; then the doors are left open to prevent odour.

Moving : Before the refrigerator is moved, remove all objects from inside , fix the glass partitions, vegetable holder, freezing chamber drawers and etc. with tape, and tighten the leveling feet; close the doors and seal them with tape. During moving, the appliance shall not be laid upside down or horizontally, or be vibrated; the incline during movement shall be no more than 45°. The appliance shall run continuously once it is started. Generally, the operation of the appliance shall not be interrupted; or otherwise the service life may be impaired

Service, repair and spare parts
Do not attempt to alter or modify this appliance in any way, or to repair or replace any part unless it is specifically recommended in this manual. All other servicing should be referred to a qualified technician. Contact our after sales support on 1300 11 43 57 for advice. Our after sales support centre stocks a selection of spare parts for the Esatto 238L Upright Fridge/Freezer. To enquire about purchasing a part, call us on 1300 11 43 57 or email support@residentiagroup.com.au

FAQs and Troubleshooting

Failed operation

|

Check whether the appliance is connected to power or whether the plug is making good contact. Check whether the voltage is too low.

Check whether there is a power failure or partial circuits have tripped

Odour

|

Odorous foods shall be tightly wrapped Check whether there is any rotten food Clean the inside of the refrigerator

Long-time operation of the compressor

|

Long operation of the refrigerator is normal in summer when the ambient temperature is high It is not recommended to have too much food in the appliance at the same time

Food shall get cool before being put into the appliance The doors are opened too frequently

Light fails

|

Check whether the refrigerator is connected to power supply and whether the illuminating light is damaged

Doors cannot be properly closed

|

The door is stuck by food packages. Too much food is placed within the appliance. The refrigerator is tilted

Loud noise

|

Check whether the floor is level and whether the refrigerator is also level. Check whether accessories are placed at proper locations

Door seal loose

|

Remove foreign matters on the door seal

Heat the door seal and then cool it for restoration (or blow it with an electrical drier or use a hot towel for heating)

Water pan overflows

|

There is too much food in the chamber or food stored contains too much water, resulting in heavy defrosting

The doors are not closed properly, resulting in frosting due to entry of air and increased water due to defrosting

Hot housing

|

Heat dissipation of the built-in condenser via the housing, which is normal. When housing becomes hot due to high ambient temperature, storage of too much food or the compressor is shut down, provide sound ventilation to facilitate heat dissipation

Surface condensation

|

Condensation on the exterior surface and door seals of the refrigerator is normal when the ambient humidity is too high. Just wipe the moisture with a clean towel.

Abnormal noise

|

Buzz: The compressor may produce buzzes during operation, and the buzzes are loud particularly upon start or stop. This is normal.

Creak: Refrigerant flowing inside of the appliance may produce creak, which is normal.

Technical Specifications

Standards
This product complies with AS/NZS IEC 62552.1/2/3:2018 for electrical safety, and with EN 55014-1:2006+A1:2009 A2:2011 for electromagnetic compatibility.

Purchase Details

For your records, please record details of your purchase below and staple your receipt on this page so you don’t loose it. Your serial number can be found on the rear of your appliance.

STORE DETAILS

• STORE NAME
• ADDRESS
• TELEPHONE

PRODUCT DETAILS

• MODEL NO.
• SERIAL NO.*

Warranty Information

WARRANTY TERMS AND CONDITIONS REFRIGERATION APPLIANCES
This document sets out the terms and conditions of the product warranties for Residentia Group Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance.

1. IN THIS WARRANTY

2. ‘acceptable quality’ as referred to in clause 10 of this warranty has the same meaning referred to in the ACL;

3. ‘ACL’ means Trade Practices Amendment (Australian Consumer Law) Act (No.2) 2010;

4. ‘Appliance’ means any Residentia Group product purchased by you accompanied by this document;

5. ‘ASR’ means Residentia Group authorised service representative;

6. ‘Residentia Group’ means Residentia Group Pty Ltd of 165 Barkly Ave, Burnley VIC 3121, ACN 600 546 656 in respect of Appliances purchased in Australia;

7. ‘major failure’ as referred to in clause 10 of this warranty has the same meaning referred to in the ACL and includes a situation when an Appliance cannot be repaired or it is uneconomic for Residentia Group, at its discretion, to repair an Appliance during the Warranty Period;

8. ‘Warranty Period’ means:

9. where the Appliance is used for personal, domestic or household use (i.e. normal single family use) as set out in the instruction manual, the Appliance is warranted against manufacturing defects for 24 months, following the date of original purchase of the Appliance;

10. ‘you’ means the purchaser of the Appliance not having purchased the Appliance for re-sale, and ‘your’ has a corresponding meaning.

11. This warranty only applies to Appliances purchased and used in Australia and is in addition to (and does not exclude, restrict, or modify in any way) any non-excludable statutory warranties in Australia.

12. During the Warranty Period Residentia Group or its ASR will, at no extra charge if your Appliance is readily accessible for service, without special equipment and subject to these terms and conditions, repair or replace any parts which it considers to be defective. Residentia Group or its ASR may use remanufactured parts to repair your Appliance. You agree that any replaced Appliances or parts become the property of Residentia Group. This warranty does not apply to light globes, batteries, filters or similar perishable parts.

13. Parts and Appliances not supplied by Residentia Group are not covered by this warranty.

14. You will bear the cost of transportation, travel and delivery of the Appliance to and from Residentia Group or its ASR. If you reside outside of the service area, you will bear the cost of:

15. travel of an authorised representative;

16. transportation and delivery of the Appliance to and from Residentia Group or its ASR, in all instances, unless the Appliance is transported by Residentia Group or its ASR, the Appliance is transported at the owner’s cost and risk while in transit to and from Residentia Group or its ASR.

17. Proof of purchase is required before you can make a claim under this warranty.

18. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. Residentia Group is not liable in the following situations (which are not exhaustive):

19. the Appliance is damaged by:

20. accident
    misuse or abuse, including failure to properly maintain or service

21. normal wear and tear

22. power surges, electrical storm damage or incorrect power supply

23. incomplete or improper installation

24. incorrect, improper or inappropriate operation

25. insect or vermin infestation

26. failure to comply with any additional instructions supplied with the Appliance;

27. the Appliance is modified without authority from Residentia Group in writing;

28. the Appliance’s serial number or warranty seal has been removed or defaced;

29. the Appliance was serviced or repaired by anyone other than Residentia Group, an authorised repairer or ASR.

30. This warranty, the contract to which it relates and the relationship between you and Residentia Group are governed by the law applicable where the Appliance was purchased.

31. To the extent permitted by law, Residentia Group excludes all warranties and liabilities (other than as contained in this document) including liability for any loss or damage whether direct or indirect arising from your purchase, use or non use of the Appliance.

32. For Appliances and services provided by Residentia Group in Australia, the Appliances come with a guarantee by Residentia Group that cannot be excluded under the Australian Consumer Law.You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Appliance repaired or replacedif the Appliance fails to be of acceptable quality and the failure does not amount to a major failure. The benefits to you given by this warranty are in addition to your other rights and remedies under a law in relation to the Appliances or services to which the warranty relates.

33. At all times during the Warranty Period, Residentia Group shall, at its discretion, determine whether repair, replacement or refund will apply if an Appliance has a valid warranty claim applicable to it.

34. Missing parts are not covered by warranty.Residentia Group reserves the right to assess each request for missing parts in a case by case basis. Any parts that are not reported missing in the first week after purchase will not provide free of charge.

35. To enquire about claiming under this warranty, please Bfollow these steps:

36. carefully check the operating instructions, user manual and the terms of this warranty;

37. have the model and serial number of the Appliance available;

38. have the proof of purchase (e.g. an invoice) available;

39. telephone the numbers shown below.

40. You accept that if you make a warranty claim, Residentia Group and its ASR may exchange information in relation to you to enable Residentia Group to meet its obligations under this warranty.

The Australian Consumer Law requires the inclusion of the following statement with this warranty: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>