CRYSTORAMA MIL8009BK Mila Nine Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA MIL8009BK Mila Nine Light Chandelier
Product Information
The product is a lighting fixture model #MIL8009BK manufactured by Crystorama. It has been in the market for sixty years and is designed to provide lighting solutions. The fixture is dry rated, meaning it is suitable for indoor use only. The product comes with various parts and accessories, including a frame, upper and lower arms, wire connectors, mounting bar, mounting screws, washer, hex nut, thread nipple, canopy, collar ring, collar loop, chain, stem, candle sleeves, distributor box cover, metal spacer, nut, and finial. It requires 9 Candelabra Base Bulbs with a recommended wattage of 40 Watts and a maximum wattage of 60 Watts. LED bulbs are recommended for extended use.
One of the crystal sets included in the product consists of a 50mm smooth glass ball. It is important to note that this product may contain lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information on this warning, please visit www.p65warnings.ca.gov.
Product Usage Instructions
- Place the fixture parts on a soft cloth-covered platform before installation.
- Pass the wire through the stem and screw the stem onto the frame.
- Decide the desired hanging height and adjust the chain to the correct length.
- Spread the arms out equally.
- Install the mounting bar onto the outlet box.
- Raise the fixture up and make the wire connection. Attach the canopy over the mounting bar and secure it with the collar ring.
- Put the distributor box cover, metal spacer, and nut on the frame in order, then secure with the finial.
- Dress the crystals as illustrated.
Note: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Ensure that the power is turned off before performing any electrical work.
Dimension
WARNING
- Electrical Danger
- Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
You will need
You will need 9- Candelabra Base Bulb 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
- Pass the wire through the stem then screw the stem onto the frame.
- Decide the desired hanging height and adjust the chain to the correct length.
- Spread the arms out equally.
- Install the mounting bar onto the outlet box.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with a collar ring.
- Put the Distributor box cover, metal spacer and nut on the frame in order then secure with the finial.
- Dress the crystals as illustrated.
Crystal Sets
- 1 Piece. (1)50mm Smooth Glass Ball
Part Numbers
Part Numbers-For Hanging
- A. (2)-Wire Connector
- B. (1)-Mounting bar
- C. (2)-Mounting screw
- D. (1)-Washer
- E. (1)-Hex nut
- F. (1)-Thread nipple
- G. (1)-Canopy (W5″xH1″)-XSN8005BKCAN5IN
- H. (1)-Collar Ring
- I. (1)-Collar Loop
- J. (1)-Chain (4mmx72″)-XSN8005BKCHA5MM
- K. (1)-Fixture Loop ; H3.5″
- L. (1)-Stem;H20″-XSN8009BKSTEM20IN
- M. (9)-Candle Sleeve; H3 1/4″-XSN8005BKCDL3.25IN
- N. (3)-Upper Arms-XSN8009BKARM
- 0. (6)-Lower Arms-XSN8009BKLARM
- P. (1)-Frame
- Q. (1)-Distributor box cover
- R. (1)-Metal spacer
- S. (1)-Nut
- T. (1)-Finial-XSN8005BKFIN
Scan
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>