CRYSTORAMA ORS-733-MG Orson Three Light Ceiling Mount Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA ORS-733-MG Orson Three Light Ceiling Mount
ASSEMBLY INSTRUCTION
MODEL #ORS-733-MG
WARNING:
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
You will need 3 – Candelabra Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE This fixture is Dry Rated.
DIMENSION
How to Install
- Attach mounting plate to the outlet box using box screws.
- Connect the fixture wires to the supply wires.
- Mount the fixture to the outlet box with ball nuts.
- Place crystal into the frame.
- Install the bulb (Not included) in accordance with the fixture’s specifications. (DO NOT EXCEED THE MAXIMUM WATTAGE RATING
WARNING: This product can expose you to Lead which is known to the State of California to cause can and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Part Numbers
- Mounting Hardware
- Wire connector
- Mounting Plate
- Box Screws
- Grounding Screw
- (2) – Ball Nut; XVE733MGBANUT
- (3) – Crystal; Ø6-3/4″ x H1″
- (1) – Canopy; Ø5-1/8″ x H1″; XVE733MGCAN5.125IN
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>