CRYSTORAMA 2107-AG Truax One Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 2107-AG Truax One Light Chandelier
ASSEMBLY INSTRUCTION
MODEL #2107-AG
DIMENSION
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
WARNING
- Electrical Danger
- Turn Power Off
You will need 1-Medium Bulb 40 Watts Recommended 60 Watts Max Bulb not
included
USE LED BULBS FOR EXTENDED USE This fixture is DRY rated
How to Install
Assembly Instructions: Note it is strongly recommended that 2 people complete
the assembly of this item.
- Install the metal band onto the glass shade (rest the glass shade inside the foam block included in the packaging. Hold the metal band straight while another person secures it on the glass with the screws provided.
- Install bulbs into the socket.
- Attach the lower metal cap and socket cluster into the glass shade.
- Attach the upper metal cap onto the glass shade and secure using the decorative nut.
How to handle the glass
The glass hole is fragile, please assemble according to the special
instructions:
- Take off the glass from package,remove the polybag and place it horizontally on the EPS for metal ring assembly.
Sketch Map
PART NUMBER
MODEL #2107-AG
- A. Mounting Hardware
- (3)Wire Nut
- (4)Wall anchor
- (4)Anchor screw
- (4)Screws
- (1)Mounting Plate
- (1)Green Ground Screw
- B. (1)Canopy;7″x7″x0.55″h;XMO2016AGCAN7IN
- C. (3)Rod;Ø0.5″x12″h;XMO2107AGROD12IN
- D. (1)Rod;Ø0.5″x3″h;XMO2107AGROD3IN
- E.(1)Decorative nut
- F.(1)Upper metal cap;XMO2107AGCAPUP
- G. (1)Lower metal cap;XMO2107AGCAPLOW
- H. (1)Socket
- I.(1)Metal band;XMO2107AGRING8IN
- J.(3)Ball nut
- K. (3)Screws
- L.(1)Glass shade;XMO2107GLA7IN
QR SCAN
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov