westfalia WSBM1050 2 Speed Impact Drill Instruction Manual

: June 12, 2024
: Westfalia

Table of Contents

westfalia WSBM1050 2 Speed Impact Drill
Product Information
Product Usage Instructions
PARTS DESCRIPTION
INSTRUCTIONS
TECHNICAL DATA
SAFETY NOTES
EC DECLARATION OF CONFORMITY
DISPOSAL
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

westfalia WSBM1050 2 Speed Impact Drill

westfalia-WSBM1050-2-Speed-Impact-Drill-Instruction-
PRODUCT

Product Information

Product Name: 2-Gang Schlagbohrmaschine WSBM1050 2-Speed Impact Drill
Model Number: WSBM1050
Product Features: – 2-speed impact drill
Speed limiter for controlled drilling
Right-/left reversing switch for changing the direction of rotation
Gear selection knob for choosing between 1st and 2nd gear
Additional handle for improved stability and control
Lockable ON/OFF switch for safety
High drilling capacity in concrete, wood, and metal
Lightweight design for easy handling
Rated voltage: 230 V ~ 50 Hz
Rated power: 1050 W
No load speed: 1st gear and 2nd gear
Impact rate: 1st gear and 2nd gear
Power cord length: (not specified)
Drill chuck: (not specified)
Drilling capacity: 20 mm in concrete, 40 mm in wood, 13 mm in metal
Weight: 3 kg
Protection class: II

Product Usage Instructions

Unbox the device.
Assemble the additional handle by following the instructions provided.
Lock the ON/OFF switch before use.
Insert and lock the desired tool into the drill chuck.
Turn on the drill by pressing the power button.
Select the desired speed using the gear selection knob (1st or 2nd gear).
Choose the direction of rotation (right or left) using the right-/left reversing switch.
Adjust the speed limiter to control the drilling speed.
Begin drilling into the desired material, ensuring proper stability and control with the additional handle.
After use, turn off the drill and disconnect it from the power source.

Technical Data

Rated voltage: 230 V ~ 50 Hz
Rated power: 1050 W –
No load speed: 1st gear (not specified), 2nd gear (not specified)
Impact rate: 1st gear (not specified), 2nd gear (not specified)
Power cord length: (not specified)
Drill chuck: (not specified) – Drilling capacity: 20 mm in concrete, 40 mm in wood, 13 mm in metal – Weight: 3 kg
Protection class: II
Sound pressure level: LpA = 93.5 dB(A)
Sound power level: LWA = 104.5 dB(A)
Uncertainty: K = 3 dB(a)
Hand-Arm Vibration: (not specified) Safety

Notes:

Only use the impact drill for domestic purposes. The impact drill is not designed for continuous, professional use.
Read and follow the general safety notes provided in the user manual to avoid malfunctions, damage, or physical injury.
Keep the user manual for future reference and ensure it is easily accessible.
Use the impact drill with caution and avoid using it near flammable materials or in wet conditions.
Always wear appropriate personal protective equipment, such as safety goggles, gloves, and ear protection.
Do not exceed the maximum drilling capacities specified for concrete, wood, and metal.
Ensure proper stability and control by using the additional handle when operating the impact drill.
Lock the ON/OFF switch when not in use to prevent accidental activation.
Disconnect the impact drill from the power source before performing any maintenance or cleaning tasks.
If any malfunctions or abnormalities are observed during use, stop using the impact drill and contact customer support for assistance.

2-Speed Impact Drill WSBM1050
Art. 98 40 26

PARTS DESCRIPTION

westfalia-WSBM1050-2-Speed-Impact-Drill-Instruction-
FIG-1

Keyless Drill Chuck
Depth limiter
Drilling/Impact drilling selector
Lock-on button
On/Off switch
Speed Limiter
Right-/left reversing switch
Gear selection knob
Auxiliary handle

Dear Customers,
Instruction manuals provide valuable hints for using your new device. They enable you to use all functions, and they help you avoid misunderstandings and prevent damage. Please take the time to read this manual carefully and keep it for future reference.

INSTRUCTIONS

Unbox device

Assembly of the additional handle

Assembly of the depth limiter

Insert and lock tool

Turn on

Lock the ON / OFF switch

Max. speed Adjustment

Select the direction of rotaiton

Selecting the gear

Drilling/Impact drilling

TECHNICAL DATA

The declared vibration total value and the declared noise emission values have been measured in accordance with a standard test method. The declared vibration total value may also be used in a preliminary assessment of exposure.

Warning!
The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, in particular, what kind of work piece is machined. It is necessary to identify safety measured to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure include wearing gloves while using the tool, limiting working time, and using accessoriesin good condition.

SAFETY NOTES

Please note the included General Safety Notes and the following safety notes to avoid malfunctions, damage or physical injury:

Only use the impact drill for domestic purposes. The impact drill is not designed for continuous, professional use.
Make sure the voltage corresponds to the type label on the unit.
Before starting any work on walls, floors or similar, make sure that all power lines in the work area are switched off at the main switchboard. Inspect the proposed drill hole location for any utility lines (e. g. water, gas, power) before drilling. Use a suitable device such as a metal or electricity line detecting device.
Persons with limited physical, sensorial or mental abilities are not allowed to use the impact drill, unless they are supervised and briefed for their safety by a qualified person.
Make sure the cord cannot get caught in any way. Do not wind the cord around the unit and do not bend it.
Do not jam the cord or pull the cord around edges. Keep the power cord away from any hot or sharp surfaces.
Always switch off the impact drill and unplug it before cleaning, maintaining or when not in use.
Do not operate the unit if it does not work correctly or has been dropped. Do not disassemble the unit and do not try to repair it yourself. Contact the Westfalia customer service.
Always wear ear protection when working with the impact drill. The noise can lead to hearing damage. Wear a dust mask to protect yourself from potentially hazardous dust. Preferably wear safety goggles to protect your eyes against thrown particles.
Always use the provided auxiliary handle. Loss of control of the impact drill can cause injuries. The unit has a hand arm vibration of 3 m/s2 when drilling and a hand arm vibration of 8.74 m/s2 when impact drilling. To avoid injuries due to the hand arm vibration, take sufficient rest breaks.
Hold the impact drill by the insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Switch off the impact drill immediately when the tool insert jams. Be prepared for high reaction torque that can cause kickback. The tool insert jams when the power tool is subject to overload or it becomes wedged in the workpiece.
When working with the machine, always hold it firmly with both hands and provide for a secure stance. The power tool is guided more secure with both hands.
Secure the workpiece. A workpiece clamped with clamping devices or in a vice is held more secure than by hand.
Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode.
Always wait until the machine has come to a complete stop before placing it down. The tool insert can jam and lead to loss of control over the impact drill.
Never use the impact drill with a damaged cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Damaged cables increase the risk of an electric shock

EC DECLARATION OF CONFORMITY

We, the Westfalia Werkzeugcompany, Werkzeugstraße 1, D-58093 Hagen, declare by our own responsibility that the product 2-Speed Impact Drill WSBM1050
Article No. 98 40 26
is according to the basic requirements, which are defined in the European Directives and their amendments.

2011/65/EU
Restriction of the Use of certain hazardous Substances in electrical and electronic Equipment (RoHS)

2014/30/EU
Electromagnetic Compatibility (EMC)
EN 61000-3-2:2014, EN 61000-3-3:2013

2006/42/EC
Machinery
EN 62841-1:2015+AC, EN 62841-2-1:2018+A11
The technical documentations are on file at the QA department of the Westfalia Werkzeugcompany westfalia-WSBM1050-2-Speed-Impact-Drill-Instruction-
FIG-17

DISPOSAL

Dear Customer,
Please help avoid waste materials.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of valuable materials, which can be recycled. Please do not discharge it in the rubbish bin, but check with your local council for recycling facilities in your area.
©Westfalia 04/23