AMERICAN LIGHTING SPKPL-PLUG-1S-WH SPEKTRUM+ Smart Plug Instruction Manual

120V SPEKTRUM+ SMART PLUG
INSTALLATION INSTRUCTIONS
SPKPL-PLUG-1S-WH

SPKPL-PLUG-1S-WH SPEKTRUM+ Smart Plug

WARNING
These products may represent a possible shock or fire hazard if improperly installed or attached in any way.
Products should be installed in accordance with these instructions, current electrical codes, and/or the current National Electric Code (NEC).
WARNING
Do not exceed maximum recommended loads! 10A total.
WARNING: RISK OF ELECTRIC SHOCK
Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician. Ensure all work meets applicable local and national codes.

SAFETY INFORMATION

• Read all installation instructions before beginning; if not qualified, do not attempt installation. Contact a qualified electrician.
• To reduce the risk of fire, electric shock, or injury to persons, pay close attention to this manual and stay within its guidelines when using this product. Save these instructions for future use.
• This product is suitable for indoor use in dry locations only.
• Do not submerge in liquids nor use the product in the vicinity of standing water or other liquids, or where water can accumulate.
• Do not use if there is any damage to the product; inspect periodically.
• Do not install in tanks or enclosures of any kinds.
• This product utilizes Bluetooth® 2.4Ghz wireless technology.
• The rated input power for this unit is 100-120V AC 60Hz.
• The maximum rated current for this unit is 10A.
• The standby power consumption of this unit is ≤0.5W.
• This unit is not intended to be used in conjunction with a any dimmer.

CONTENTS

INSTALLATION

1. Insert Spektrum+ Smart Plug into power socket. See Figure 1.

2. Long press (3 seconds) the power button on the side of the plug. A blinking light indicates the device is now in pairing mode. This light will go out when the device is successfully paired. See Figure 2.

3. Open the Spektrum+ Smart App and click the “+” button to add a device. See Figure 3.

4. Add the Smart Plug device from the auto-add menu. If the device does not show up automatically, use the “add manually” option to add the device manually.
   See Figure 4.

5. Follow the pairing instructions on screen.

6. Once device is paired, utilize the Spektrum+ App to configure settings for device.

CONTROLLING THE SMART PLUG: The Spektrum+ smart Plug utilizes Bluetooth Wireless Technology and can be controlled via the Spektrum+ Smart Lighting App; It is not intended to be used in conjunction with any dimmer.
DISTANCE OF REMOTE CONTROL CAPABILITY: 25 meters (approx. 80ft)
RESET THE DEVICE: Press and hold the power bottom on the device for 8 seconds until the indicator light begins flashing.
USING THE SPEKTRUM+ SMART LIGHTING APP: Please follow the Spektrum+ Smart Lighting App guide.

CONSIDERATIONS

Tools Needed:
None

Approximately 5 minute to install and setup the plug

FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

©2023 American Lighting, Inc. REV2324
www.AmericanLighting.com
11775 E. 45th Ave. Denver, CO 80239
Ph: 1-800-880-1180
Fax: 303-695-7633

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>