MEEC TOOLS 025109 Spray Gun Instruction Manual

MEEC TOOLS 025109 Spray Gun

SAFETY INSTRUCTIONS

• Read all the instructions and safety instructions, and familiarise yourself with the product before use.
• Maintain and clean the product in accordance with these instructions for best functionality, safety and life span.
• The product must only be used for its intended purpose and in accordance with these instructions. Do not make any modifications to the product.
• Use a protective mask, head gear, safety clothing, waterproof safety gloves, and rubber boots etc.
• Store pesticide in suitable containers and out of the reach of children. Pesticide should be handed in for waste disposal in accordance with local regulations.
• Seek out fresh air immediately after inhaling toxic substance. In the event of skin contact with toxic substance, rinse immediately with plenty of fresh water. After swallowing toxic substance, induce vomiting with fresh or saltwater and seek medical attention immediately.
• Never spray at people or animals. Never spray against the wind.
• Never use the product if you are tired, ill or injured, or under the influence of drugs, alcohol or medication. Pregnant women and persons with allergies should not spray chemicals. Do not consume alcohol immediately after spraying chemicals.
• Never spray strongly acidic or alkaline substances, or other corrosive solutions. Never spray highly toxic and/or persistent pesticide on plants intended to be food. Always take the instructions of the manufacture concerning the waiting period before harvesting into consideration.
• Clean the product after it has been used, otherwise there is a risk that it will be damaged by the chemicals, or that a reaction will occur between different chemicals.
• Never leave the product unattended with toxic substances in it.
• The maximum permitted temperature in the product is 45°C.
• Never release the hose when the air chamber is pressurised – risk of liquid spraying out under high pressure.
• Test spray with water before use and check that the container, hose and spray do not leak. Lubricate seals and all moving parts with grease to avoid seizing.
• Prepare chemicals in accordance with the instructions of the manufacturer, otherwise there is a risk of personal injury, danger to animals and/or failure to achieve the required result.
• After use, change clothes and wash exposed parts of the body, such as hands and face. Shower all of the body after spraying highly toxic substances.

SYMBOLS

Read the instructions.

TECHNICAL DATA

• Volume 12 l
• Operating pressure 2-4 bar
• Stroke length 40-80 mm
• Piston diameter 45 mm
• Net weight of complete uni t 2.85 kg
• Size 328 x 147 x 500 mm

DESCRIPTION

• The spray gun is intended for spraying pesticide on plants and for spraying detergent and/or pesticide in public places and livestock buildings.
• The container is intended to be carried on the back. It has a built-in air chamber for compact format, high level of safety, and to prevent leakage
• The spray gun has a piston pump for ease of use, and uniform pressure.
• There is also a trigger for flexible non-leaking use during intermittent and continuous spraying.
• Different nozzles can be used for optimum results.
• The spray gun is made of alkali/acid resistant, corrosion resistant material to ensure airtightness and durability.

FUNCTION

The pump handle moves the piston up and down in the pump cylinder and produces overpressure, which opens and closes the ball valve so that the fluid in the container is sprayed out through the spray.

PARTS

1. Nozzle
2. Air chamber
3. Spray head
4. Lid for container
5. Container
6. Trigger
7. Pump handle
8. Hose
9. Base plate

FIG. 1

NOZZLES

Nozzle for tapered jet.

FIG. 2

Adjustable nozzle with 4 holes

FIG. 3

Nozzle for dispersed spray

FIG. 4

USE

1. Remove the lid from the container and fill it with a suitable substance through the filter strainer.
2. Firmly replace the lid.
3. Put the spray gun on your back and pump with the pump handle to pressurise the air chamber.
4. Press the trigger to start spraying. It is possible to spray intermittently and continuously.

FIG. 5

USING THE TRIGGER

Intermittent spraying

FIG. 6

Continuous spraying

FIG. 7

MAINTENANCE

• Clean the outside of the spray gun in a suitable place after use.
• Clean the inside of the spray gun by flushing at high pressure until the outlet is clean.
• The spray should be lubricated after cleaning.

STORAGE

Store the spray gun in a dry place indoors, out of the reach of children.

TROUBLESHOOTING

junctions and/or replace seals.

The pump handle is stiff.

| ****

Filter or nozzle is blocked.

| Clean filter and/or nozzle and lubricate moving parts with grease.

Low pressure.

| Piston and/or ball valve is damaged or the lock pin has come loose.| Replace piston and/or ball valve. Tighten the lock pin.
The pressure does not increase when moving the pump handle.| The ball valve has dislodged or come loose.| ****

Refit the ball valve correctly.

• Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation.

• It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product.

• For the latest version of operating instructions, refer to the Jula website.

• WWW.JULA.COM
  

• © JULA AB 2023-02-15
  

• JULA AB
  

• BOX 363, 532 24 SKARA, SWEDEN

Documents / Resources

| MEEC TOOLS 025109 Spray Gun [pdf] Instruction Manual
025109, 025109 Spray Gun, Spray Gun, Gun
---|---

References

• Jula – products for home and garden

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>